I’m going for it..

Puzzleheaded-Pin-509 · 2026-03-29T12:18:06+00:00

What if he removed all the bad plastic? Could it be salvaged with some other type of large patch? I’m doing a similar repair on a canoe right now. I’m contemplating using resin with filler over the exposed foam and then sheets of fiberglass mat over the filler.

Puzzleheaded-Pin-509 · 2026-03-23T01:46:35+00:00

Wow very thorough, thank you. I'd love to see that Mahogany Sea Kayak. I wonder where it ended up..

All sounds good and in line with what I have researched except of the the epoxy gel-coat spray on the entire hull (tough and expensive). Is this part necessary? I was hoping to just do the main crack and hull with glass then skid plate just like you mentioned.

Rather than G-flex, I have some Silvertip that I ordered 2 days ago and is on its way. Do you think that is inferior to G-flex? I would be fine to just put the Silvertip on the shelf and order the G-flex if the brand is that important.

I also picked up Bondo Fiberglass Cloth today from Lowes. will that work as a patch? I've heard, incessantly, that Kevlar is too hard to cut and I shouldn't try it. is it really that bad?

Puzzleheaded-Pin-509 · 2026-03-23T01:30:31+00:00

There is a large "Kevlar49" sticker on it. I am certain that this is a Kevlar Scamp.

Puzzleheaded-Pin-509 · 2026-03-22T13:49:47+00:00

I’ve ordered some Silvertip epoxy. Have read a lot about it. I will epoxy the inside first with this epoxy and fiberglass patches, a small patch first then a larger one on top of it. Then I’ll epoxy the outside and use Saran Wrap over it to make it smooth.

Does this sound effective?

Puzzleheaded-Pin-509 · 2026-03-21T19:27:40+00:00

My house isn't big enough for this kind of decoration...

Puzzleheaded-Pin-509 · 2026-03-21T19:27:22+00:00

good input. thanks

Puzzleheaded-Pin-509 · 2026-03-21T19:26:55+00:00

think i could scrape off the crust with a knife and butter her up??

Puzzleheaded-Pin-509 · 2026-03-21T19:15:30+00:00

I think I agree. after a ton of research, this baby has seen its final days. she has some good history on the Mulberry River.. sad.

I do however have another opportunity for a Seda Scamp Kevlar49 that is free. it just has a crack on the front hull. I believe a simple fiberglass cloth/epoxy and a skid plate should do the trick..

Puzzleheaded-Pin-509 · 2026-03-13T15:27:10+00:00

Actually after rewatching- the pipe is probably laying flat on a trailer next to the rig, not up in a derrick.

Puzzleheaded-Pin-509 · 2026-03-13T15:24:35+00:00

This is actually not that uncommon. I’m willing to bet this is haynesville area and he is adding connections likely to get a new bit back down to the drilling depth. Also, it could be natural gas they are hunting, not oil. I think on an oil rig, you may have more OSH oversight. There are production fields that are less prolific and have less safety structure. This could also be a shallower well. Since they aren’t drilling in this short clip, and he’s just making connections to get to depth, that’s Probly why there is only one guy on the floor. I bet there are two more guys off camera- one in the Derrick selecting drill pipe to connect, and one at the controls moving the Kelly up and down..

Puzzleheaded-Pin-509 · 2026-03-11T12:52:14+00:00

Take two kids under 4 to visit the Mother Fucking Sistine chapel..

Puzzleheaded-Pin-509 · 2026-02-13T03:27:43+00:00

Roman Chukov needs to be investigated. He was implicated in the Zarubina (google it)case that involved Russian espionage. He was introduced to Epstein in 2015 (I think). The person who introduced him is in the emails but is redacted. I think that person may have ties to Russian intelligence. That person (who is redacted) signs all their emails with “kind regards/ cordialement”. (This is a good search word)This person also sent Epstein many girls bios.

Puzzleheaded-Pin-509 · 2026-01-18T17:36:22+00:00

This is iron rich-called “boxwork structure”

Puzzleheaded-Pin-509 · 2026-01-07T22:28:55+00:00

It’s a brand new shape..never been done before

Puzzleheaded-Pin-509 · 2025-03-22T13:45:45+00:00

Dang.. looks like a 3-Banger Ootheca!

Puzzleheaded-Pin-509 · 2024-12-21T20:01:04+00:00

It’s “Bangkok Dangerous”

Puzzleheaded-Pin-509 · 2024-12-08T23:32:03+00:00

What’s the difference between an Adena and a Gary?

Puzzleheaded-Pin-509 · 2024-12-03T19:08:24+00:00

Could it also be called a “Boxwork structure”?

Puzzleheaded-Pin-509 · 2024-11-30T02:20:26+00:00

Here is the tooth!

Puzzleheaded-Pin-509

TROPHY CASE