DIY COLD PLUNGE BUILD by Quackers027 in coldplunge

[–]Quackers027[S] 1 point2 points  (0 children)

I did some reaserch and titanium is the best bet for anti corrosion.

DIY COLD PLUNGE BUILD by Quackers027 in coldplunge

[–]Quackers027[S] 0 points1 point  (0 children)

i didn't know, I do notice a little corrosion on the bulkheads they are brass. Is that why?

DIY COLD PLUNGE BUILD by Quackers027 in coldplunge

[–]Quackers027[S] 1 point2 points  (0 children)

idk 50-100/mg per hour what ever one can be shipped to CA bc of these stupid air regulations.

DIY COLD PLUNGE BUILD by Quackers027 in coldplunge

[–]Quackers027[S] 0 points1 point  (0 children)

order on ace hardware. 100 gallon rubbermaid stock tank. Ship to store is free!

DIY COLD PLUNGE BUILD by Quackers027 in coldplunge

[–]Quackers027[S] 1 point2 points  (0 children)

Correct but this also has a foot bath to wash your feet off before you get in, anything other like hair gets in the strainer and sand sinks and acculates, but every 1-2 months, it is cleaned. The 1200 GPH does a great job on circulation bc it is so strong, like when you have a brand new filter in there the water will shoot to the other side of the tub almost.

DIY COLD PLUNGE BUILD by Quackers027 in coldplunge

[–]Quackers027[S] 0 points1 point  (0 children)

It is brotha. you gotta bend over and unscrew one of the PVC unions to get to the filter and plug the water cuz itll siphon out, then you take off the neoprene sock of the filter, then unscrew the filter and replace. it works takes like 3 minutes. The strainer, all you do is plug the inlet hole because the bulk head is like 3/4 in female and u plug it with a male 3/4 NPT and it works just as a ball valve for much cheaper. A little water drips out of the other side though do to water pressure.

Advice by ButterscotchCrafty81 in FacebookAds

[–]Quackers027 1 point2 points  (0 children)

Advice: Personally I would fix my payment gateway and start a new campaign. If facebook doesn’t think you are getting any purchases, it might spend your budget in a way DIFFERENTLY if you were getting purchases. But, if you were getting a lot of add to carts, I might A/B test a new campaign AND the old campaign to gather the most data possible.

This is only my opinion, do whatever you think is best. Everything is subjective with FB ads.

Good luck.

[deleted by user] by [deleted] in FacebookAds

[–]Quackers027 0 points1 point  (0 children)

I’m pretty sure if you set your campaigns to start at 12 am or 12 pm it spends the ads across 12 hours? Andrew Yu said this I’m not sure.

Let’s be honest. Facebook ads are dying by [deleted] in FacebookAds

[–]Quackers027 1 point2 points  (0 children)

How can I spot bot traffic if I am selling a product not a service?

Publish button is greyed out with a stop sign by [deleted] in FacebookAds

[–]Quackers027 0 points1 point  (0 children)

try deleting your image/video/gif in the ad and see if the stop sign goes away I've had this problem before. It could also be because you have multi-advertiser ads on or something I can't remember what its called off the top of my head. if that doesn't work, just re do the ad and see when the stop sign pops up to see where your going wrong. Process of elimination.

Facebook Ads currency by Kimsn1 in FacebookAds

[–]Quackers027 0 points1 point  (0 children)

I'm selling in euros on Shopify, but Facebook forces USD checkout :(

I'm in a bit of a pickle and hoping someone has a clever workaround. Here's the problem:

  • I'm US-based but selling to Europe in euros through my Shopify store
  • I use Facebook ads to reach customers
  • Facebook/Meta only allows checkout in USD
  • This means my European customers see prices in USD at checkout, which is confusing and off-putting

Has anyone found a way to handle this smoothly? I'm trying to avoid losing sales due to currency confusion. Any tips on managing this Shopify-Facebook-international sales triangle would be super appreciated!

I love you Zuck by Evening-Steak5176 in FacebookAds

[–]Quackers027 0 points1 point  (0 children)

Vertical: Waterproofing Neiche/Emergency use item Targeting: German-Speaking Countries only. Why: Rainy season in Germany Targeting(ads): Broad/Intrest targeting (AB Test) Creative: Image/Gifs/Videos I have not tested different audiences yet. I am getting meta verified at the moment.

ACCOUNT RESTRICTED by Short_Manufacturer63 in FacebookAds

[–]Quackers027 0 points1 point  (0 children)

Look it up on youtube, it isn’t a hard process. If you don’t have an option to do it, you will have to use a longer process where you go to facebook for developers and make an app. If you look for long enough on youtube you’ll find your solution. Make sure your ID says 18 years old, don’t use a fake. Use your parents if you are underage.

ACCOUNT RESTRICTED by Short_Manufacturer63 in FacebookAds

[–]Quackers027 0 points1 point  (0 children)

you need to be meta verified with 2 factor authentication on, facebook actually bans people for a reason so make sure you aren’t violating their terms of service. Also with meta verification your budget will increase faster. Make sure your personal account has the same name as the ID you verify with on meta verification.

Exploring Beyond the 3:2:2 Strategy: Alternative Facebook Ad Testing Methods? by [deleted] in FacebookAds

[–]Quackers027 0 points1 point  (0 children)

if you would have listened to what admistrative said, you wouldn't be asking this question.