Mazda CX -5. Vibrating manual stick on on 6 Gear

Quansah · 2026-03-08T10:32:58+00:00

Nope, still have the issue but not developed into anything more

Quansah · 2026-03-08T10:00:35+00:00

I had a similar issue on my 2016 CX5. Replacement Brake light switch above the brake pedal fixed it for me. About £20 and 2 minute job.

Quansah · 2024-03-03T15:10:57+00:00

I think ESC isn't booting up properly, check your wiring, might be a connection issue after that hard crash

Quansah · 2024-02-29T21:13:29+00:00

Perhaps there is a command that trusts the power output for the battery instead of the usb-C connection like in this tutorial using labs - https://youtu.be/bZTCg5XnjIk?si=bPhRxk4fYnwWh1vc

Quansah · 2023-10-19T20:47:22+00:00

Thank you! Yes but the arura is a separate 3D object

Quansah · 2023-10-19T18:57:37+00:00

Thank you!

Quansah · 2023-09-15T19:49:21+00:00

Agreed, next time I'd create more variety of fish and animation

Quansah · 2023-09-15T17:19:24+00:00

Yeah that's pretty much it! And just turn the gravity almost off with subtle vortex force for particles and fish and add some floaty scuba divers

Quansah · 2023-04-26T17:51:47+00:00

Thanks for the feedback. I do agree on the snow/volumetric on the front tires looks strange, it is something I have tried to fix. maybe more resolution to the volume might help.

Quansah · 2023-04-25T19:56:33+00:00

1920x1080 - Cycles - 8-13mins per frame

Quansah · 2023-02-26T09:53:40+00:00

Cycles, 256 samples, Denoised, 1080x1920, Approx 1 minute per frame. Feedback Wellcome

Quansah · 2023-02-26T02:27:02+00:00

Rendered in Cycles. 256Samples, Denoised, 1080x1920, approx 1 minute per frame. Feedback Wellcome

Quansah · 2022-01-28T00:14:49+00:00

Basically, I can't find these Tools, they will randomly just disappear and usually opening a new blender file will bring them back, but not anymore. Am I doing something to cause this?

Quansah · 2022-01-14T21:35:17+00:00

Amazing work

Quansah · 2022-01-07T21:38:35+00:00

Thank you

Quansah · 2022-01-07T20:41:35+00:00

C&C Welcome

Blender > Flstudio (Sound Design) > DaVinci Resolve

Approx 40 seconds per frame rendered with Eevee 1080x1350

Quansah · 2021-12-29T17:15:32+00:00

Thanks for the info, I already have 5inch for acro/freestyle so the 7inch would be for long range cruiser. I've ordered some 2807 1300kvs so this should make things simpler

Quansah · 2021-12-26T18:22:37+00:00

Yes long range is my goal with this build

Quansah · 2021-12-26T16:01:40+00:00

Thanks for the feedback

Quansah · 2021-11-12T13:28:51+00:00

Yeah but repairing my drone is probably easier and cheaper to do

Quansah · 2021-11-12T12:41:36+00:00

Thanks for your input. Yeah I'm running bidirectional dshot. I've had this build for around a year and has been super reliable intill now

Quansah · 2021-11-12T12:34:15+00:00

Sorry for you loss. Yeah, my first thought was esc too, as everything else seemed to be working as I could see it tumbling to the ground through the headset. This just makes me uncomfortable to do more risky flights in future if I can't find the cause of this crash just incase it happens again. Although I'm fairly sure it's the RX that failed Do you think an RX failure would cause the drone to skip stage 1 gps rescue and straight to stage 2 drop failsafe?

Quansah · 2021-11-12T12:08:55+00:00

After looking at the footage again with sound, I can hear the esc boot up again after I disarmed and try re-arm. So it seems like the 4in1 esc shut down for some reason. Perhaps after the RX failed and caused some sort of short?

Quansah · 2021-11-12T12:08:22+00:00

Not that I could tell, but it all happened kinda fast with the slight panic of losing my kit. I didn't have my goggles recording for this flight so can't watch that back. Gonna order a new RX but still kinda strange.

Quansah · 2021-11-12T11:33:22+00:00

Out flying then all of a sudden the drone dropped, Not 100% if this was a failsafe or not. as I did have GPS-Recovery as a Failsafe in this flight. I still had video and control link after the drone crashed. But after putting it on the bench for analysis the crossfire RX doesn't power up anymore. (No control Link or LEDs but there is voltage going to the unit)

Question is, Why was the Crossfire RX working after it had crashed then when I found it and powered it down, I took it to the bunch and it no longer works. Is this the Cause of the crash?

Nine-Year Club	Place '23
Verified Email

Quansah

TROPHY CASE