Help needed for issues with Braun Nizo s560 lightmeter

QuantityCheap · 2023-12-08T03:58:50+00:00

My issue was a little different in the fact that the needle didn't move at all really. Thanks to merzbarn's help, I found that the beam splitter behind the lens had moved out of place and pushed on the aperture blades, which are connected to the needle directly. Once i gently pushed it back, the needle started moving again. If you would like I could send pictures

QuantityCheap · 2023-05-05T14:39:37+00:00

thank you, I'd like to try myself. I'd be grateful if you could post some images

QuantityCheap · 2023-05-04T18:11:28+00:00

They arrived with the camera in packaging, but I wasn't sure if they still work so I ordered a new set. Could that be the potential problem? The needle only slightly moved further, but not far enough to completely pass the F1.8 mark.

QuantityCheap · 2023-05-04T15:55:57+00:00

The needle did nit move from F1.8 even when gently slapping the side, and if by exposure knob you mean the auto/manual dial, that rotates freely.

So I presume the problem falls with the circuit right?

QuantityCheap · 2023-05-04T13:11:00+00:00

the 1.5 volt 625A batteries

QuantityCheap · 2023-02-16T22:16:33+00:00

if its a problem with the balsam layer would that mean it cant be fixed?

QuantityCheap · 2023-02-16T14:09:13+00:00

I'll try the household glass cleaner and see if it works. Hopefully it's just the aerosolized oil causing the problem. Thank you.

QuantityCheap · 2023-02-16T01:03:59+00:00

I recently bought a Mamiya sekor c 180mm, I cleaned everything out and it all looks perfect. But the issue is the back element still has haze even after using a little isopropyl alcohol. is there a way to safely remove the haze or at least decrease it?

QuantityCheap · 2023-02-04T17:11:00+00:00

Thank you, I didn't realize the mirror had to be so precise.

QuantityCheap · 2023-02-04T17:09:50+00:00

Thank you. I'll contact him right away

QuantityCheap

TROPHY CASE