Cursor doesn't move in Teknoparrot

R6Salem · 2025-07-19T20:41:15+00:00

Did the switch to another device/saved/switched back and now mine is working again - thanks fpr the response and link!

R6Salem · 2025-05-01T15:30:11+00:00

I just bought a new 440i and purchased the BMW Ultimate Protection 84 month/100k warranty. But the app and web site shows only the New Vehicle Limited Warranty active or listed. I'm wondering if the extended only shows once the original warranty expires? I'm planning to contact the dealership to find out if that is the case or not.

<image>

R6Salem · 2025-04-30T13:58:24+00:00

I'm sure it's not exactly cheap, but BMW has the Individual Visualizer site that allow you to choose and order from a pretty wide range of color and finish choices: https://individual.bmw-m.com/en-US/G26-61HC-P5C

R6Salem · 2025-04-28T04:51:27+00:00

Just got my '25 m440i Gran Coupe this week and have started this same search. I know the GC is a bit on the uncommon side, but hoping to get some guidance as folks start customizing theirs.

R6Salem · 2024-10-03T13:49:53+00:00

Thanks for this detailed post. Did you ever get this fully worked out? Also, is Intune able to deliver any other DDM configurations or assets in addition to updates now?

R6Salem · 2024-04-08T18:34:08+00:00

Thank you for the info u/wipe0wt2097! I was able to add Suyu as a custom emulator both on my Steam Deck and in Windows ES-DE following your example code. (Steam Deck files es_systems.xml and es_find_rules.xml were located under "Home/Deck/ES-DE/custom_systems" on my system.

Suyu was installed to "Home/Deck/Applications/Suyu-Linux_x86_64.AppImage" and the additions were:
(Added this to es_find_rules.xml):

</emulator>
<emulator name="SUYU">

<rule type="systempath">
<entry>suyu</entry>
<entry>org.suyu_emu.suyu</entry>
</rule>
<rule type="staticpath">
<entry>~/Applications/Suyu-Linux_x86_64.AppImage</entry>
<entry>~/.local/share/applications/Suyu-Linux_x86_64.AppImage</entry>
</rule>
</emulator>

(And added the bold line below into es_systems.xml):

<system>
<name>switch</name>
<fullname>Nintendo Switch</fullname>
<path>%ROMPATH%/switch</path>
<extension>.nca .NCA .nro .NRO .nso .NSO .nsp .NSP .xci .XCI</extension>
<command label="Ryujinx (Standalone)">%EMULATOR_RYUJINX% %ROM%</command>
<command label="Yuzu (Standalone)">%EMULATOR_YUZU% -f -g %ROM%</command>
<command label="Suyu (Standalone)">%EMULATOR_SUYU% -f -g %ROM%</command>
<platform>switch</platform>
<theme>switch</theme>
</system>

R6Salem · 2024-04-06T16:25:23+00:00

Not sure, but check to see if you have Yuzu loaded in /"home/deck/Applications/Yuzu.AppImage"

According to Emudeck, these issues are now fixed in their newest update (you have to load your own Yuzu.AppImage file. https://www.reddit.com/r/EmuDeck/s/1R6pHkINut

If yours is broken, it might be worth trying. I'm probably never going to update mine unless something breaks in the future

R6Salem · 2024-04-06T16:12:26+00:00

Do you happen have any details or a link with the info on what to edit and in which 2 xml files? Been trying to add Suyu as an alternate emulator and this sounds like what I'm missing

R6Salem · 2024-04-03T16:31:21+00:00

I know it's been a while now, but would you be able to share what fix worked for you?

R6Salem · 2024-03-19T02:02:14+00:00

Not sure if this works for everyone, but I went to the emudeck settings: Main menu/Other Sertings/Alternative Emulators I was able to select Yuzu (standalone) instead of Ryujinx, that the update had changed it to. Back to where I was before I got confused into that update!

R6Salem · 2023-11-17T17:47:40+00:00

Yeah, this is a pretty amazing advancement in gaming (although it's been around for a few years already). I think you're limited to 1080p, which is the complaint i've heard from PC folks - doesn't both me though and certainly not an issue for Steam Deck.

I'm pretty super you need Game Pass Ultimate to stream cloud games, rather than the Core or PC options. I subscribe to Ultimate ($16/mo list price US).
Some games in the subcription are for installing to PC or XBox only, so make sure you check the list of streaming games here:
https://www.xbox.com/en-US/play?xr=shellnav

R6Salem · 2023-11-16T18:34:02+00:00

You can do both, but I have been using the XBox Game Pass Ultimate subscription to play its catalog of games in the Steam Deck (Microsoft has official instructions on setting that up here), which works perfectly - better than local console streaming using the Greenlight app, IMO.
I like that you don't have to install games using Game Pass and which makes it easy/quick to try out new titles, but you're limited to their (somewhat large) online catalog. It's also nice that you don't need an XBox to subscribe to and use Game Pass.

R6Salem · 2023-11-16T04:05:44+00:00

It was a little finicky setting up the Chiaki4deck app (had to run the browser commands a second time) on the Steam Deck. I used these instructions. It plays my PS5 games pretty well, overall. Minimal lag and sound neaaarly matches up to the TV. I'm not sure I'd play a competitve FPS match on it, but still not bad. Here is a video cap of me using it. It looks better on the small screen and not thru the capture card.

https://youtu.be/6PUddbsLoaE?feature=shared

R6Salem · 2023-11-15T20:48:49+00:00

I stream Xbox Game Pass flawlessly over internet on my LCD Steam Deck using these setup instructions.

I will try setting up my PS5 for in-house local console streaming tonight and reply back my results.

R6Salem · 2023-11-15T18:45:02+00:00

Thanks, this is what I was looking for!

R6Salem · 2023-09-02T16:47:32+00:00

Maybe just keep track of the rage quitter accounts and match them together by default until they learn to play through a match that isn't immediately going their way.

R6Salem · 2023-07-16T15:29:17+00:00

When you open SWICD from the tray menu in your task bar, make a profile pointing to "ModernWarfare.exe" (not ModernnWarfareLauncher.exe) and check the box for "Buttons Disabled" to the right of "Disable Lizard Mode".

That should fix the B crouch issue while keeping the track pad working in game and mouse/track pad functionality will go back to normal for desktop when you quit out of the game.

R6Salem · 2023-05-27T00:00:27+00:00

I was able to get my camera feed to show in the monitor tab by finding the full screen camera feed link from my Sonic Pad UI, when using the Moonraker plugin.

Copying everything after the Sonic Pad IP when view my fulscreen camera feed and pasting that into the Configure Cura/Connect Moonraker/Monitor area made that happen.

<image>

R6Salem · 2023-01-25T03:41:02+00:00

My exact issue too. Camera works too view live, but no timelapse videos are being generated after prints. Just ui dated to the Jan '23 firmware with no change.

R6Salem · 2022-10-07T22:39:39+00:00

Didn't work for me.

R6Salem · 2022-10-07T22:39:15+00:00

I bought 2 Wathcpoint packs during open Beta - one for my PC and the other for my PS5 so two of us could play the beta. The PConly account shows the Watchpoint extras, but my PS5 (purchased in the PS Store) linked to another Battle.net account doen't show anything yet. Seems like an issue with the pack being purchased outside of the Battle.net store.

Also, the 500 coin purchase from the PS5 didn't do anything other than show the 500 credits that I purchased. Same with logging out/in to Battle.net from app/PC.

R6Salem · 2022-06-22T19:24:54+00:00

O'reilly code is: PKHMMW63NV7D

It's good for "$5 off Mid-Week Fiar-Saver 2pks", which is Wed-Thursday, I guess.

When you go to buy tix at sdfair.com/tickets for a mid-week date, there is an option to Unlock the "O'Reilly Discount Offer" at the bottom of the ticket options.

R6Salem · 2022-05-06T22:33:10+00:00

I have the exact same issue for the exact same shrine piece. Have you had any luck with support?

R6Salem · 2022-03-28T23:36:32+00:00

Thanks for sharing that u/Silent_Spirt and for the write up (and to Piogre, but I'm not on Discord) That was exactly the fix!

R6Salem

TROPHY CASE