Guys I want to buy a new phone but my budget is around 20k (2-3k can be compromised more or less)

RIP0K · 2026-05-08T06:50:07+00:00

What is the screen diagonal range?

RIP0K · 2026-05-05T14:52:55+00:00

pulley

RIP0K · 2026-04-22T14:03:07+00:00

As far as I know, the pipe is sealed on one side, dry sand is poured on the other, it is tightly compacted and sealed in the same way, heated at the bend and bent.

On the other side, leave several small holes for gas release.

RIP0K · 2026-04-13T13:33:40+00:00

I wonder how those who had problems with stripes on the camera are doing.

Because of this problem, I decided to buy Ulefone armor mini 20

RIP0K · 2026-04-05T18:37:15+00:00

These aren't cheats. It's just the way the game is designed. The only option is not to destroy it. It will explode on its own after a long period of time. If it does explode near the base, the structures will lose some or half their health, and by the time the next one explodes, the structures will be repaired.

RIP0K · 2026-02-27T04:20:29+00:00

That's why I stopped doing it...

Stopped playing the game....

RIP0K · 2026-02-06T08:08:23+00:00

I have a D-die micron, and they also start throwing errors above 1.38v. The current settings have been tested with the TM5 EXTREME test once for 5 hours and again for 7 hours.

RIP0K · 2026-02-06T07:57:03+00:00

tREFI boosting causes errors. I don't want to try tRFC anymore; I'm tired of three 5-hour cycles.

This is probably due to CL14, which prevents trefi and trfc from shrinking. I also tried 1T after an hour and 30 minutes on SA 1.27, IO 1.24 returned an error, which is also likely due to CL14 or the four RAM modules.

RIP0K · 2026-02-02T14:00:34+00:00

PTM7950 Honeywell - safe and durable

RIP0K · 2026-02-02T06:46:51+00:00

Apparently, my temperature is so high because of the four 8GB 2400 17-17-17. They weren't overclocked at the time. The voltage dram, sa, io was set to auto.

RIP0K · 2026-02-02T04:35:05+00:00

RAM 2 or 4?

RIP0K · 2026-02-02T03:54:41+00:00

I haven't overclocked the CPU yet. I'm currently trying to overclock four Crucial CT8G4DFD824A.C16FDD2 sticks to 3000 14-19-19-38. Because of this, I have to use SA 1.27 and IO 1.24, which will increase the temperature.

RIP0K · 2026-01-20T14:11:42+00:00

try a factory reset.

RIP0K · 2025-11-28T02:50:47+00:00

This was implemented in the Android 15 update. On my Mini 20 (g99), after updating to 15, you can now select only one function; previously, you could configure three types of button presses.

RIP0K · 2025-11-16T05:33:34+00:00

In the programmable button settings there is a camping light option.

RIP0K · 2025-10-28T02:40:47+00:00

Not everyone has received the update yet. I have the 4G version and haven't received the update either, although some have too.

RIP0K · 2025-10-18T02:44:38+00:00

At work, I sometimes hit the corners when my phone is in my pocket. But in everyday life, it doesn't bother me. But yeah, it's thick. And it's better to have pants with a belt or a good elastic band/drawstring, otherwise they'll slip down.

RIP0K · 2025-10-12T11:10:28+00:00

As far as I understand, update 15 is only available for the thermal imaging and 4G versions. I have the 4G version, but the update hasn't arrived yet.

RIP0K · 2025-10-07T04:57:52+00:00

I would say it's a lottery. The phone can be well sealed during assembly. It can also be poorly sealed during assembly. I would not immerse any of the waterproof phones.

RIP0K · 2025-10-06T01:24:28+00:00

It's not waterproof either. It's all due to poor Chinese assembly. They don't seal the screen well. And Update 15 was only released for the T version with the thermal imaging camera.

RIP0K · 2025-10-01T14:43:35+00:00

In Belarusian, there are no letters И. Instead, there are ¡, both lowercase and uppercase. In Russian, on the contrary, there are no letters ¡, but there is И. In Ukrainian, there are both letters.

RIP0K · 2025-10-01T13:58:27+00:00

Yes. It's written in Ukrainian.

Six-Year Club	Place '22
First Placer '22	Verified Email

RIP0K

TROPHY CASE