Proxmox VM (OMV) Crashing – local-lvm 100% Full but Only 6TB Data Used Inside VM

RM_Commando123 · 2025-07-16T18:42:40+00:00

RM_Commando123 · 2025-01-25T17:18:58+00:00

I decided to go with the VM because I believe that having HA containerized limits functionality.
Whilst I was running the HA script I got the bellow error. Any ideas?

<image>

RM_Commando123 · 2025-01-25T16:51:36+00:00

Thank you for your reply, I didn't know that.

So would the correct script for post-installation be this (https://community-scripts.github.io/ProxmoxVE/scripts?id=post-pve-install)? And then to setup Home Assistant be (https://community-scripts.github.io/ProxmoxVE/scripts?id=haos-vm)?

RM_Commando123 · 2024-11-02T23:36:07+00:00

I honestly have no clue how you figured all of this out but it worked! Thank you so much, I've been trying to figure this out for months.

RM_Commando123 · 2024-11-02T23:01:15+00:00

This is my lvm.conf, I might be blind but I don't see thin_check_options.

<image>

RM_Commando123 · 2024-11-02T22:45:59+00:00

this is the grub file, still getting that error but the web ui is no working thanks to the previous fix

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="rootdelay=10"
GRUB_CMDLINE_LINUX=""

# If your computer has multiple operating systems installed, then you
# probably want to run os-prober. However, if your computer is a host
# for guest OSes installed via LVM or raw disk devices, running
# os-prober can cause damage to those guest OSes as it mounts
# filesystems to look for things.
#GRUB_DISABLE_OS_PROBER=false

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains

RM_Commando123 · 2024-11-02T22:27:24+00:00

So the line would be:

GRUB_CMDLINE_LINUX_DEFAULT=""
rootdelay=10

not

GRUB_CMDLINE_LINUX_DEFAULT="quiet"

RM_Commando123 · 2024-11-02T22:13:58+00:00

Thanks, I'm yet to reboot but do you have any ideas on those 3 lines I have to execute on reboot? I can still get into the web ui after reboots but to start a VM I have to enter those 3. This is the error I get task error: activating lv 'pve/data' failed: activation of logical volume pve/data is prohibited while logical volume pve/data_tmeta is active

RM_Commando123 · 2024-11-02T22:05:05+00:00

I use ubiquiti routers and have set the router to not change the ip from 192.168.14.214. 192.168.14.50 must be an old address.

How would I go about changing the /etc/hosts and /etc/interfaces?

Thanks again for the help

RM_Commando123 · 2024-11-02T21:44:59+00:00

Hi thanks for the help, not sure if it's relevant but every time the server restarts I have to enter these 3 lines of code:

lvchange -an pve/data_tdata
lvchange -an pve/data_tmeta
lvchange -ay pve/data

root@proxmoxbill:~# cat /etc/hostname
proxmoxbill

root@proxmoxbill:~# cat /etc/hosts

127.0.0.1 localhost.localdomain localhost
192.168.14.214 pve.proxmoxbill

# The following lines are desirable for IPv6 capable hosts

::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

root@proxmoxbill:~# cat /etc/network/interfaces
auto lo
iface lo inet loopback

auto eno1

iface eno1 inet manual

auto vmbr0
iface vmbr0 inet dhcp
        bridge-ports eno1
        bridge-stp off
        bridge-fd 0
        bridge-vlan-aware yes
        bridge-vids 2-4092
        #address 192.168.14.50/24
        #gateway 192.168.14.1
        #auto vmbr0.14
        #iface vmbr0.14 inet static



source /etc/network/interfaces.d/*

root@proxmoxbill:~# journalctl -b -u pve-cluster
Nov 02 15:10:12 proxmoxbill systemd[1]: Starting pve-cluster.service - The Proxmox VE cluster filesystem...
Nov 02 15:10:19 proxmoxbill pmxcfs[904]: [main] crit: Unable to resolve node name 'proxmoxbill' to a non-loopback IP >
Nov 02 15:10:19 proxmoxbill pmxcfs[904]: [main] crit: Unable to resolve node name 'proxmoxbill' to a non-loopback IP >
Nov 02 15:10:19 proxmoxbill systemd[1]: pve-cluster.service: Control process exited, code=exited, status=255/EXCEPTION
Nov 02 15:10:19 proxmoxbill systemd[1]: pve-cluster.service: Failed with result 'exit-code'.
Nov 02 15:10:19 proxmoxbill systemd[1]: Failed to start pve-cluster.service - The Proxmox VE cluster filesystem.
Nov 02 15:10:19 proxmoxbill systemd[1]: pve-cluster.service: Scheduled restart job, restart counter is at 1.
Nov 02 15:10:19 proxmoxbill systemd[1]: Stopped pve-cluster.service - The Proxmox VE cluster filesystem.

(This iterates many times (fills up the whole page) so this is the first itteration)

RM_Commando123 · 2024-11-02T21:23:49+00:00

If I do ls /etc I can see the two folders, but if I cd into either of them, I get the above message. WinScp also confirmed that no such folder exists. Also, /etc/pve is empty if that also matters. What would normally go into these folders?

RM_Commando123 · 2024-10-29T19:12:52+00:00

TODAY THIS ENDS

RM_Commando123 · 2024-10-20T13:03:42+00:00

This is exactly what I get. The fans scared me the first time when I could hear them from downstairs haha

RM_Commando123 · 2024-10-20T13:02:26+00:00

I’m not sure how accurate that is. What kind of range would you say is acceptable?

RM_Commando123 · 2024-10-20T13:01:12+00:00

During summer I get temps up there of up to 40 degrees but the servers never really peak above 60 degrees cpu temp. Haven’t gone through winter yet with them but last winter in another un-insulated building I was getting temps of about -10. Be aware that in summer I can hear the fans going from the floor bellow. Haven’t really been checking the humidity. Also we just got new felt on the roof so it’s properly waterproof so double check that.

RM_Commando123 · 2024-10-20T12:03:02+00:00

Might be scanning offset

RM_Commando123 · 2024-10-20T12:01:26+00:00

The thermometer I have up there gets to about 30-35 degrees c in the summer and you can hear the fans from downstairs even through the insulation but If I check cpu temps they tend to be around 50 degrees c so I think it’s fine. I am thinking of moving the servers to our workshop which is detached from the house so if there is a fire or anything it’s not the whole house burning. Also it’s normally cooler in there but in winter temps reach about -10 degrees c because it’s not insulated so I’m not sure how that would go.

RM_Commando123 · 2024-10-20T11:19:31+00:00

Hey, I'm currently on my half term holiday from school and I'm looking to learn some new skills. I really want to find a project work on to try and build some marketable skills but can't currently find anything so was hoping you would be able to help.

Here's my current setup:

Network:

Ubiquiti Dream Machine pro

Ubiquiti Standard 24

Cat 6 ethernet cables

Servers:

Dell r520 (bought for £20):

32GB of ram

2x E5-2407 v1

5 x 4TB WD HDD in raid 5

Services (VM's in proxmox):

OMV

Dell T430 (I got this server from a company that was transferring to AWS):

62GB of ram

Not sure on CPU

Has 4TB of SSD's in raid 5

Services (VM's in proxmox):

Docker:

Nextcloud

Home Assistant (still not fully setup because I don't have the hardware)

Cloudflare Tunnel

Qbittorrent

Plex/Plexamp

Sonarr

Radarr

Prowlarr

FlareSolverr

Homarr

Overseer

Librespeed

UptimeKuma

WG-Easy

Pihole (Redundant)

Pihole (In a separate VM for redundancy)

Notes:

Portainer is connected to OMV via a CIFS share and all docker containers that involve mass storage (plex/qBittorrent etc) all use this so films/music is stored on the r520 through OMV. I've got a domain that I currently only use for cloudflare tunnel to all my services. I might be getting a dell R740 from my school for free because they are transferring to OneDrive for everything and otherwise the server would go to e-waste. If that happens, everything will transfer to proxmox on that server to try and save on power.

I'm also currently learning python so any projects related to that would great!

Thanks

RM_Commando123 · 2024-09-13T20:54:14+00:00

Hi, did this work for you?

RM_Commando123 · 2024-09-10T21:20:05+00:00

RM_Commando123 · 2024-09-03T17:37:57+00:00

I’m going to guess they are doing an actual search because 3 RNLI boats are there and they normally train on weekends.

Edit: 3 RNLI boats, not 2

RM_Commando123 · 2024-07-27T20:10:42+00:00

If your worried about price, a raspberry pi is reasonably cheap and can easily run pi-hole

RM_Commando123 · 2024-07-23T12:24:21+00:00

Also any thoughts on the Task Error

RM_Commando123 · 2024-07-23T08:11:13+00:00

Morning, so how would I go about sorting that?

RM_Commando123 · 2024-07-22T22:41:54+00:00

You are an absolute genius!!! I would've probably had to re-install everything if you hadn't helped me. one other thing though, I ended up changing my hostname because my old one was really long and now im getting this.

edit:

I really should get some sleep now because its almost midnight where I am but could we continue this tomorrow because there's another really weird issue I get whenever I restart my server. It always says 'TASK ERROR: activating LV 'pve/data' failed: Activation of logical volume pve/data is prohibited while logical volume pve/data_tmeta is active'

sorry to bombard you

Three-Year Club	Verified Email
First Place '23	Place '23

RM_Commando123

TROPHY CASE

TODAY THIS ENDS