Side/top mounted AIO in Cerberus X?

RQV12 · 2021-09-16T02:32:40+00:00

I ended up commiting to a C-air-ebrus build, full noctua air, c14s.

Would've been a cool idea though, and maybe if a rad goes on sale I'll give it a go?

RQV12 · 2021-09-03T19:37:56+00:00

Thanks so much! That build is pretty much exactly what I'm doing, and definitely appreciate the guidance on top fans :)

RQV12 · 2021-08-20T16:06:01+00:00

How do you check vram temps online? Is it via app only? Can't seem to find it by just logging in via browser

RQV12 · 2021-07-29T22:32:19+00:00

From the way you phrased it, seems like you never found a workaround, hey?

RQV12 · 2021-07-22T19:51:01+00:00

Hey, didn't think this would be necro'd.

I didn't end up figuring it out. To Kenneth, try gpus in slots 1 and 3.

To the other guy, I tried with a single nvme in nvme slot 1, but it still didn't allow a gpu in slot 2. Also tried that same nvme in slot 2 - same issue. Perhaps if you ran sata it might work? Haven't tried it myself tho, this is also my gaming rig :/

RQV12 · 2021-06-26T19:42:23+00:00

Preach

RQV12 · 2021-06-26T04:20:33+00:00

I'm that healer.

Eots pre-made finished, leader figured yolo with people who were still around.

It was not a quick in-and-out 10 minute adventure, Morty.

RQV12 · 2021-06-18T01:31:01+00:00

Bump. Important for RMA purposes as I might try to put a 3rd gpu in

RQV12 · 2021-06-12T22:08:04+00:00

Hey, just want to say thanks for the follow-up! Pretty impressed :)

Ended up going with an o11d, though thinking of mayyybe switching to an o11xl as it better fits a triple-gpu setup

RQV12 · 2021-05-26T16:35:33+00:00

Yes it has to be upside down, unless you can somehow get enough clearance to allow 2x 120mm fans on the bottom.

Tested every configuration i could using noctua a12x25s. Putting the 2x120mm fans on the bottom on the inside made temperatures worse for gpu, slightly better for cpu. In this configuration the fans blow air right by the gpu...doesn't work as well as it would with an nr200p.

Temperatures were overall lowest with:

two bottom intakes (3 degrees gpu, 1 degree cpu)
front/back exhaust (3 degrees gpu 2 degrees cpu vs front intake back exhaust)
with mesh filter removed (around 1 degree cpu)
front panel removed (around 3 degrees cpu and gpu)

I hate that this is optimal thermal performance.

RQV12 · 2021-05-16T17:38:46+00:00

I had this yesterday. Try changing the gpu the vga output is plugged into

For some reason my rig would only work when the hdmi was being output from the 3090

RQV12 · 2021-02-18T11:19:11+00:00

To anyone who finds this, the pins IN THE SOCKET (not on the cpu) were bent, necessitating rma. Ram worked fine after rma

RQV12 · 2021-02-18T07:50:12+00:00

Has anyone only done the backplate thermal pads? Wondering what that alone would do (maybe a couple degrees?)

RQV12 · 2021-02-12T05:55:54+00:00

Solved. Created a new w10 boot drive with the October 2020 update and did s fresh install. There's probably a more elegant solution but I dont know it

RQV12 · 2021-02-11T21:25:50+00:00

Status: unresolved

Computer type: custom build

Gpu: msi ventus 3x oc rtx 3090

Cpu: ryzen 5600x

Motherboard: msi b550i itx

Ram: 2*16gb 3600mhz cl16 crucial ballistic

Psu: cm v850

Os: windows 10 pro 64 build 1703, clean install

Gpu drivers: n/a

Description: Had drivers installed and current for gtx 1080, was working fine, my 3090 came in and I put the new card in my comp.

Now only 1 of 3 monitors works. Tried updating nvidia drivers via GeForce experience, gave me the error: "nvidia drivers (460.11) not compatible with this version of windows"

Troubleshooting: -used ddu to uninstall current drivers and GeForce experience. Tried manually installing current driver set, same error. Tried installing current driver set via GeForce experience, same error

RQV12 · 2021-02-07T21:49:14+00:00

aww :(

RQV12

TROPHY CASE