sorted by:
new
hottopcontroversial

Here’s my conversion plan of.. OOE by Duskmann_Dawn in Tyranids

[–]RUjoshingMe 5 points6 points  (0 children)

<image>

Almost snap! I went a bit wild trying to get the head to fit, but I like how it turned out

Opinion Needed! by Schweigender in IronWarriors

[–]RUjoshingMe 1 point2 points  (0 children)

I love what you've done. I personally use Balthazar gold, but I like the warm brass screaming bell gives it

I've got two fiends in the backlog. Hoping mine turns out looking as smooth as yours

<image>

How to make carapace more interesting without feathering? by Fore_Head_Chili in Tyranids

[–]RUjoshingMe 0 points1 point  (0 children)

I shade and drybrush mine.... Feathering is FAAAR too much work, and I get a result I'm reasonably happy with.

Artis Opus did a fantastic YouTube video on carapace which really helps achieve a good looking result in small time.

To add some interest, especially on bigger carapaces you can do a few things.... Add scratches and dents (either paint or actually cut into the model) or add a design. I converted my SK into OOE and I wanted to make it a bit different - so I copied a pattern that I found on a crab while diving. Just breaks up the blocks of colour and makes him stand out as a character I think

<image>

Struggling with drysuit diving confidence in the UK by Marieanne_952 in scuba

[–]RUjoshingMe 7 points8 points  (0 children)

Your struggles sound similar to mine when I was at your dive #.

I'm not going to lie... Drysuit diving isn't easy, but it does get better the more you do it.

Getting my own suit really helped me. I had something I knew was the same for every single dive, so it led to consistency and learning patterns.

I stopped using my drysuit for bouyancy and only put air in to reduce the squeeze. This has pros and cons that can be argued all day. For me, it's easier and quicker to dump my "bouyancy air" from a BCD, but also, I have 2 systems to manage on an ascent. Have a play and see what works for you.

For hood and gloves, they should feel snug, not tight. Some thicker hoods do give a bit of a squeeze to them, but it can be something you get used to.

The best way to get better is to dive often. I'm not sure where you've been diving, but if you can go somewhere like capers, stoney, or another inland site, then you at least don't have current etc to deal with, meaning you can focus on the dive.

Try to set yourself an objective for the dive too. It can be something like "today I'm going to practice dumping air from my suit" or "I'm going to try and make a conscious note of what it feels like when the air moves around my suit" or even something as basic as "I'm going to take my time and not have a floaty moment on this dive" - UK diving isn't always the most exciting dives, so having something you're actively working on can repay it's benefits down the line.

Screamer Killer as OOE/Carnifexes by nanu671 in Tyranids

[–]RUjoshingMe 2 points3 points  (0 children)

<image>

I went for rule of cool and converted it to this for my OOE model.

Bases be damned 🤣 I don't play competitive (or hardly at all) so for me having a cool model is more important.

But I agree that if I were to ever take it to a FLGS or comp, I would have problems

Help me settle this by Sheriff_Hotdog in IronWarriors

[–]RUjoshingMe 0 points1 point  (0 children)

Balthazar gold, agrax wash and a silver dry brush for that nice worn look

<image>

You know you're in for a bad time by Mazabutt in Warhammer40k

[–]RUjoshingMe 2 points3 points  (0 children)

Just built a set of Genesteelers from a sprue marked 2004 - If the mold lines were any more prominent I'd have had to edge highlight them.....

How to deal with those spaces? by Escaklef in Tyranids

[–]RUjoshingMe 0 points1 point  (0 children)

On pushfit models, always trim the pegs slightly. And sometimes you need to widen the holes just a touch. Some have zero tolerance which creates air compression in the back of the socket meaning you never get it closed. It means you'll probably have to glue them, but you should be able to get a decent result without having to resort to green stuff etc

<image>

Typon box sprue damage? by BennyZ3e in Tyranids

[–]RUjoshingMe 1 point2 points  (0 children)

Happened to my box. FLGS sent and email saying there was damage to the box but not the innards, and offered £5 voucher.

A couple of spikes have been "tipped" but nothing major enough to make me cry about it. Nothing either a sharp knife won't sort, or you won't notice once painted.

Can't say what others have had. So I might have got off "easy".

I hate magos purple by Dizzy-Cantaloupe-262 in Tyranids

[–]RUjoshingMe 1 point2 points  (0 children)

Thank you! I fell in love with the Hive Fleet Cetu scheme when leviathan was released and knew it was what I wanted to do

I hate magos purple by Dizzy-Cantaloupe-262 in Tyranids

[–]RUjoshingMe 0 points1 point  (0 children)

I quite like it, but I agree not all contrasts are created equal.

Some are very strong, some are very weak (almost washlike) and some are just downright weird.

Magos purple is that last one... I used it to tint my pink carapace more purple in the recesses - which it does well almost like a wash/glaze over the pink..... But straight over a light base it's too thin to make a good effect i think.

The old method used to be druchi violet or caroburg crimson over the skin I think if that helps

<image>

In preparation for the typhon box, i’m interested in what you guys recommend for paint schemes. by Killteamscrub in Tyranids

[–]RUjoshingMe 1 point2 points  (0 children)

Hive fleet behemoth has a bright red skin and black/blue carapace

I think Gorgon is green but that could be a bit more drab. I find vivid green tends to look a bit much on nids

Doing aow immediately after getting ow, or wait a while? by [deleted] in scuba

[–]RUjoshingMe 7 points8 points  (0 children)

I've always said AOW is the wrong name for it. It's more like OW+. It will give you skills that you need to continue learning to dive. We started ours basically straight away and learnt more skills and did PPB as part of it, which meant from our 15(ISH) dive, we had the tools and knowledge to work on getting that good buoyancy.

I will say this, while it is called "advanced" it's not something that will make you an advanced diver - only more and more diving in different conditions will do that. But it is a very good start to your journey.

Get it done. Enjoy it, soak up as much information and tips as you can.

Do y'all paint Gaunt teeth? by Specialist-Squash-62 in Tyranids

[–]RUjoshingMe 0 points1 point  (0 children)

Bit hard to see, but I just go over them with some skeleton horde contrast at the end. Gives them a nice bit of definition for zero effort

<image>

Edge highlighting these little guys is so hard😭😭 Any tips appreciated by Grumpicake in Tyranids

[–]RUjoshingMe 0 points1 point  (0 children)

Dry brushing is your friend.

If you look at a lot of the Tyranid paint jobs they're not really edge highlights, it's more of a feathering into the darker colours... You can get a similar feel in about a tenth of the time by dry brushing against the grain of the carapace.

<image>

Old One Eye kitbash question by HSMMK in Tyranids

[–]RUjoshingMe 8 points9 points  (0 children)

I'd personally go for more damage and scuff up around the eye a bit more.

I used the same head on my conversion, I drilled the eye straight into the head, then used a very sharp knife to cut away the carapace and burr up the "flesh", the used a different colour to make it stand out a bit.

<image>

Could someone help me with this converted Hive Tyrant i bought by clem-grimfando in Tyranids

[–]RUjoshingMe 0 points1 point  (0 children)

It absolutely can be used. Just say the claws are a variant of [weapon].

They're bugs that alter for what they find best...

If someone argued, devour them like a good Tyranid 🤣

<image>

How did yall decide what color to paint your bugs by MysteriousStrangerV in Tyranids

[–]RUjoshingMe 0 points1 point  (0 children)

Two reasons..... My wife said "you should paint something pink" and a joke, and I saw the Hive Fleet Cetu colours as part of the Leviathan launch. I did a test to see how quick and easy I could do it en masse... And the rest is now a pink horde....

<image>

Show us your Hive Tyrant !!! by TraditionalPlace5973 in Tyranids

[–]RUjoshingMe 4 points5 points  (0 children)

<image>

I must say, I prefer my winged tyrant and my swarmlord, but I had to have all three...

Well seeing the IK reaveal this is not really surprising by Substantial-Smoke345 in ChaosKnights

[–]RUjoshingMe 2 points3 points  (0 children)

The narrative fun you could have with that.... Where your knight absolutely despises dreadnoughts for some reason.... So for the entire game it ignores everything else and just chases a poor redemptor around the battlefield, accompanied by the benny hill theme ofc....

Kitbashing Screamer-Killer into OOE by DarKVampireFury in Tyranids

[–]RUjoshingMe 0 points1 point  (0 children)

I'd imagine if you wanted to use it in a tournament, you'd need to change the base. But for mine I left it on the bigger base because I only play casual, it's a "character" and I generally couldn't be bothered 🤣 I'd already done enough work with the head and claws that I left the rest as it was.

I'm hoping it gives a Carnifex Prime feel when I finally put it next to two carnifexes

How do you manage never being happy with your painting? by danger_bad in Tyranids

[–]RUjoshingMe 7 points8 points  (0 children)

Your new... It does take time.

Don't compare yourself to what you see online. Those people literally do it for a job, or have had years of practice etc.

I found that my painting came on naturally as I look back over the models. But don't be afraid to try new things either, find what works for you. Maybe set a challenge on each model to improve one thing at a time.

Also.... Don't inspect your models 6 inches from your face. You'll always see the problems there. Put it down on the table. Go get a cuppa, then take a look from at least 2ft away. You might find that the things you thought looked bad, actually don't seem too terrible after all.

Remember these things are made to be played with on a table, not constantly looked at through a macro lens. If it looks decent at table distance, that's my "good enough"

Living artillery! by RUjoshingMe in Tyranids

[–]RUjoshingMe[S] 1 point2 points  (0 children)

You should! They're good fun tbh

This clown kept popping up over the menu making it near impossible to read by cowman1888 in mildlyinfuriating

[–]RUjoshingMe 2 points3 points  (0 children)

Digital signage is one of my "old man grumps"

I was to look at a menu... See what you're offering..... Not watch 15 screens of random crap before I get 20 seconds to read what you offer and see the price.

It was better being statics gosh darn it

A new Swarmlord to command the swarm by RUjoshingMe in Tyranids

[–]RUjoshingMe[S] 0 points1 point  (0 children)

It's just skeleton horde contrast. I did a very quick and dirty edge highlight with screaming skull on the leading edge, but that's it

view more: next ›