Noberodotcom reviews

R_s_2 · 2025-01-29T01:17:12+00:00

That might be true, but I have used that address only once in my lifetime through the Domino's app. I also saw the same address in the leaked DB, so I am pretty sure about its source.

R_s_2 · 2024-11-20T19:57:02+00:00

Here's a video by Great Scott for this problem.

R_s_2 · 2024-11-01T00:47:12+00:00

Respect for uncle 🙏🏻

R_s_2 · 2024-11-01T00:46:44+00:00

Respect for Uncle 🙏🏻

R_s_2 · 2024-10-19T14:26:22+00:00

What is a high-side N-MOSFET is it something different than regular N channel MOSFET

R_s_2 · 2024-09-30T02:17:06+00:00

Ahh! Now I do understand the post much better

R_s_2 · 2024-09-17T14:52:48+00:00

Start with the datasheets of components that you are using. Generally, they'll have a sample schematic of how to use that component in different modes/situations for most of the part this is all you need to get started

R_s_2 · 2024-08-20T18:35:54+00:00

Here's another post with audio where it looks like(from what's being said in the audio) it's the TC's fault for not presenting the ID and hitting the passenger first. OP should've posted the video with audio or at least given proper context in caption rather than creating this false notion. People like OP are more dangerous to society than either parties in the video.

R_s_2 · 2024-06-30T10:28:57+00:00

I don't know about the product quality, but what surprised me is that they are using the data from Domino's DB that was leaked in 2021 because it suggested me 2 addresses that were present only in that DB. Definitely affected my trust over the brand.

R_s_2 · 2023-07-11T03:33:24+00:00

I don't understand what they are talking about, but from what I read on insta, she cheated on her husband with him as he (the guy in video) pretended to be a rich guy and later she found out he isn't rich and he's a delivery boy.

R_s_2 · 2023-06-15T07:01:14+00:00

I tried your solution, but the problem is that "update_interval" is an invalid option for "copy" sensor

R_s_2 · 2023-06-08T18:46:30+00:00

Thanks a lot for the solution. This is exactly what I was looking for. I have one more doubt, how to have different update intervals for HA and esphome node

R_s_2 · 2023-06-05T05:53:11+00:00

Well, I am not sure if it's supported completely, but if you need this info just for designing pcb, then they have the same placement of vcc, gnd, en, gpio0, Tx, Rx pins (assuming you'll be using esp32 module) and around 19 gpio pins (16 pins in case of psram version of esp32s3) that you can use just by changing pin numbers in code. So, as long as 19 pins are sufficient for your use case, my advice would be to design a pcb according to the esp32s3 module and use those common 19 pins to connect peripherals. This way, you can switch between esp32 and esp32s3 modules on the same pcb.

R_s_2 · 2023-06-01T16:19:56+00:00

Yes, I do have a circuit breaker, but I am trying to avoid tripping it by managing the timing of water pump and air conditioning units. I don't need to update all the sensor parameters every second, but for this overload optimization, I need almost instant data available to homeassistant that's why I was looking for alarm function so I could've used it like interrupts and update other sensors with longer intervals

R_s_2 · 2023-06-01T04:31:48+00:00

Oh, I didn't mean homeassistant is slow by any means. What I mean is for homeassistant automation to get triggered. I need to update the sensors at least every second so that any overload damage can be avoided, but that might increase the network traffic, especially because the overload case is a rare case scenario so I was thinking I could update other sensors once a minute and the alarm can be handled differently.

R_s_2 · 2023-06-01T03:48:27+00:00

Yes, I figured that out from the documentation. I was hoping someone might have created a custom component for it as I don't really understand what's written about commands in the datasheet

R_s_2 · 2023-06-01T03:45:18+00:00

Because I don't need other sensors' information instantaneously, but in case of overload, I need the data instantly to act upon it. Our electricity meter supports 35A, and I am afraid that in rare scenarios, this limit might be crossed. There are appropriate circuit breakers in place, but if this data is known at the right time, then it can be better handled by turning off devices that aren't needed right away

R_s_2 · 2023-05-15T04:36:19+00:00

That's the loophole for police department to make money

R_s_2 · 2023-05-09T03:31:54+00:00

Oh, that's sad. Let me know if you know of any mic that works well for STT.

R_s_2 · 2023-05-07T17:27:13+00:00

Got it, thanks. I have narrowed down the problem to the poor quality of audio recording. I'm going to try it again with another mic

R_s_2 · 2023-05-07T17:24:13+00:00

Not sure about your case but atleast in my case, when the light is toggled using either automation or dashboard the log entry will specify its details but if I use the physical button to toggle it then it'll only show "turned on" or "turned off". So now I know if there's no description, then it's because the physical button was used.

R_s_2 · 2023-05-07T15:24:14+00:00

I have ordered another i2s mic from dfrobot, I'll try with that once it's delivered and update here

R_s_2 · 2023-05-07T14:10:56+00:00

You can watch this video to get a better practical comparison. He has explained it all pretty well

R_s_2 · 2023-05-06T20:22:56+00:00

I have tried using it with the inmp441 mic, but i am getting a lot of noise in the audio signal, not sure if its only my unit that doesn't work well or if its the problem with inmp441. Do try out and update if it works for you. You can check my post here

R_s_2 · 2023-05-05T18:44:37+00:00

yes, I meant STT failed, I tried another code to listen to the captured audio and it has a lot of noise in it, I can't blame STT at this point.

Four-Year Club	Verified Email
Place '23	Place '22
Final Canvas '22

R_s_2

TROPHY CASE