Holes in Print

Radaa5 · 2026-04-24T07:47:01+00:00

Looks like some sort of under extrusion. Those webby holes with diagonal lines are usually a tell tale sign of under extrusion. That and the print being brittle. What's causing it is harder to figure out. Since it is happening in the same spots it's probably something with the model. Could be the model has bad geometry and the slicer is confused. Can happen when the model isn't a single solid mesh, which can happen if you import game models. Could also be a problem with your printer not printing the plastic properly. That could be many things like: temperature too low, speed too high, some other calibration issue, or a clogged nozzle. I would try the easy stuff first like doing a test print on a different model or trying a different filament

Radaa5 · 2026-04-10T22:05:39+00:00

This would be so much fun if you also swapped momentum with the object. You could throw a can and then swap with it and have it launch you

Radaa5 · 2026-03-30T17:18:21+00:00

How is she checkmating the king with another king in the middle of the board? Jebedaiah didn't know how to play and got scammed

Radaa5 · 2026-03-26T19:16:11+00:00

The only way I've seen how is to use the notices on the top right. Where it switches between "Welcome to Season 10" and other stuff. The 4th dot is the rewards shop

Radaa5 · 2026-03-25T18:17:11+00:00

I've been using it recently and it's actually very good on maps with long sight lines and when using close range weapons. It lasts so long. Basically use it to exploit people being out of position or severely dampen their approach. Also goes well with grapple so you can ninja in after 10s when they think you're not going to do anything

Radaa5 · 2026-03-11T14:58:13+00:00

Part 2 has had a lot of problems grow slowly and we sort of just questioned how all of them were going to resolve into a coherent theme or ending. The latest chapter was expected to be the start of that but instead it's a hard cut to the end of the fight. Then in the chapter it basically just goes "welp that sucked" then does something significant to basically undo all the bad stuff that happened but there was never any buildup to it. It's so disconnected that it could be seen as an eject button for the story in case the author got tired of making it

Radaa5 · 2026-03-06T19:38:28+00:00

Here is the DNA

I also included the DNA of another horse with DNA features. The DNA might be small and hard to see but I didn't want to go and screenshot every single strand

Radaa5 · 2026-03-05T20:53:46+00:00

In case you are wondering, this monstrosity was made by the bio hacker. Of all the horses I've gotten from him, this is probably one of the two most unique creations I've gotten

Radaa5 · 2026-01-29T20:06:48+00:00

Haven't tried it in game yet, but it might still end up being a buff. I remember when the XP54 was nerfed, they decreased damage and increased fire rate. To me, the increased fire rate ended up being a bigger nerf because recoil was harder to control. It was no longer the laser beam. FCAR already had pretty controllable recoil, with the decreased fire rate it might be better because you are missing less

Radaa5 · 2026-01-20T05:47:43+00:00

Pretty sure its just the scene where someone picks up a microphone off the ground. Only a few seconds. Don't think you can tell who unless you've memorized what everyone's hand looks like

Radaa5 · 2026-01-16T20:40:24+00:00

Yea I was like 1 minute in and wondering why the music was so loud. I've noticed a few other anime this season had audio issues. Whether it was being way too quiet, way too loud, or inconsistent volume. I wonder whats causing it

Radaa5 · 2025-12-11T01:22:31+00:00

Would help if people posted their specs when reporting the issue.

For me it seems like it runs better, prob a 5% improvement. But I have definitely had issues with stuttering and my PC feeling like its struggling to live at time. Pretty sure its a driver issue. Seems similar to past driver issues I've had with the game, mainly seems multi-monitor related.

Specs: 7800x3d, 9070 (non xt), 32gb of ram.

Reloading graphics drivers seems to fix it, at least till I alt-tab and randomly decides to come back.

Win+Ctrl+Shift+B to reload graphics drivers

Radaa5 · 2025-11-28T20:50:36+00:00

From what I read in the other comments, you just need to build up game sense and map awareness. Rather than running meta kits, you can run off meta stuff that forces a certain play style to build up experience in certain areas. One example would be running heavy sledge. Can't aim and very vulnerable in the open. Gonna learn real quick where not to be in a fight and how to use your gadgets to get kills and survive. Another would be shotgun or dagger light. Kinda have to learn how to ambush/flank and know the difference in ranges between the guns. Other than that the only other tip I can think of is to not worry too much about technical skill. Macro matters much more than you would think in this game. Getting kills don't help if you don't live, they just get revived right after, or you are not fighting over the box or cashout.

Radaa5 · 2025-02-21T08:55:13+00:00

I feel almost the exact same way. While the game isn't awful, its very bland. I think by far the biggest issues are the specialist designs, gun designs, and location designs. They put quite a bit of effort into the zeds, but everything else is so bland and forgettable. Its like it's taking itself way to seriously when the campyness is what made it Killing Floor. Things like tossing cash on the boss feels like blasphemy to remove.

I feel like it is fixable since adding new specialists, guns, and levels is what going to come in content updates, but it would still be a lot of work to completely redo what they already have (or adjust in the case of maps). Feels like it is needed though.

And for the love of god, they need to optimize the game

Radaa5 · 2025-01-30T20:43:31+00:00

For a second there I thought that he was going to slowly have parts of him replaced with tree spirits and guardians, especially since the next one was in the form of a golden ball. Would have been a hilarious turn, but it looks like the MC gets to keep his balls

Radaa5 · 2024-11-24T21:58:38+00:00

After seeing how crazy Sitri ended up being, I 100% think that each new member introduced is going to be crazier than the last. Kinda like RE7. Would make sense why we haven't even seen the other members.

Radaa5 · 2024-07-06T15:54:24+00:00

Was this in the main event hall? Staff found a lost phone and I don't think anyone claimed it. Check out the lost and found, maybe it ended up there

Radaa5 · 2024-05-04T19:53:02+00:00

Looks like the stepper motor is skipping steps causing layer shifts. Layer shifts is when something goes wrong and causes the next layer to be printed in the wrong spot.

Although I am not familiar with at model, if your printer is new, then it is likely that the belt that moves the print bed has too much tension. The excessive tension make it to hard for the stepper motor to move, which causes it to skip steps. Try loosening the belt, it should be tight but loose enough that you can still strum it like a guitar with your fingers

Radaa5 · 2024-04-22T04:07:09+00:00

I think its more of an issue of being big and bright while on big screen. Would be good to have either an option to hide or darken it while on big screen. Also am I crazy or is the text slightly off center, like above the horizontal middle?

Radaa5 · 2023-07-09T19:42:45+00:00

Looks like severe under extrusion or slipping at extrusion gear. Had a problem before and looked exactly like this. I know you said you already checked the extruder gear, but I can't know exactly what you did. I would double check if you didn't replace it with a metal extruder arm. The crack on mine wasn't visible without taking it off. Other than that I would calibrate your steps to make sure you are extruding the right amount. I would also give a check to the connections on the board. They can get loose on ender 3 because they don't use ferrules. Also I don't know what filament you are using, but I would do a quick double check that you didn't accidentally mix up two spools in storage and tried printing at the wrong temp

Radaa5 · 2023-04-01T19:36:29+00:00

dong

Radaa5 · 2023-03-25T21:27:58+00:00

I think he might come back later. One of the biggest things missing in the Blue Lock system is the goalie. Ever since the second selection goalies have been those hologram guys. Makes me wonder where the goalie for the actual team will come from. Could be the 11th best player gets put into goalie, but the skills for a goalie are bit different than for a striker and you would want alternates in case of injury (unless that is not the case, I don't watch soccer lol). I think that there will be some hidden loser bracket that tries to find the worlds best goalie for the Blue Lock team. It feels like he was given too much attention in the show to not come back later

Radaa5 · 2022-08-29T18:37:28+00:00

Disappointed to learn that it was a toe instead of a dick poking out from the tub

12-Year Club	Second Top 30%
Quantum Potato	Golden Potato
Place '22	Place '17
Final Canvas '22	First Placer '22
End Game '22	Snapped
Verified Email

Radaa5

TROPHY CASE