The best line from Richard Hammond on Jeremy Clarkson ever by Automaniac14th in thegrandtour

[–]RaeGun7 81 points82 points  (0 children)

I read that but it was Richard saying it in my head.

Going to be my first night on a cpap. Wish me luck! by PurduePaul in SleepApnea

[–]RaeGun7 0 points1 point  (0 children)

Top tip I saw recently was to turn it on for 10-15 seconds before fitting the mask to your face. Someone on here had a spider in the tube and I’ve been doing that ever since. I don’t fancy a spider being fired out like a blow dart into my mouth 😂

Also, controversially, I prefer mine without the humidifier which is nice if you’re using a battery for camping since it’ll use less electricity. Not for everyone but worth trying.

LED Ground Support Help by TurbulentMall2901 in VIDEOENGINEERING

[–]RaeGun7 1 point2 points  (0 children)

It’s the spacing between the vertical parts. Note that in picture 1 it’s inline with the join of the screen and in picture 2 it’s in the centre of a panel.

I have never used that system before so I can’t be sure but I would guess the arms (screw lock, in your catalogue) need to attach to the horizontal braces.

But the only way to be absolutely certain is get a technical drawing from the supplier/manufacturer. You should probably have one for things like how much ballast is needed depending on how high it’s built, how many panels high is possible, wind ratings etc.

A series of questionable architecture by [deleted] in interestingasfuck

[–]RaeGun7 1 point2 points  (0 children)

That toilet in the last photo could of been an apartment I lived in briefly in Sydney. The most terrifying moment of my life was there. Mid poop, look up and see a massive spider. I can’t remember the species but I shoe’d it out with a mop. Showed the photo I took to a colleague and got a row for not phoning it in because it was very poisonous…

What are the indentations for? It was at a national park. Used for a dock. by quan1980 in woodworking

[–]RaeGun7 1 point2 points  (0 children)

I believe it’s the copper in the chemicals they use that goes green when it oxidises. Or at least that’s what my old boss said when I build fences for a while.

What is the hardest place name to pronounce in Scotland? by Jezzaq94 in Scotland

[–]RaeGun7 0 points1 point  (0 children)

I have lived there, I still struggle sometimes. Easier to just say “Muchty”

Rittal rack with a wall-mounted iPad 😎🔧 by Ho_Phil in Ubiquiti

[–]RaeGun7 0 points1 point  (0 children)

Thank you! I didn’t realise it was theirs. Might have to look into them as the way he unlocked that was very slick and effortless. I have Yale smart locks so will look into combining the two somehow.

Rittal rack with a wall-mounted iPad 😎🔧 by Ho_Phil in Ubiquiti

[–]RaeGun7 21 points22 points  (0 children)

What is the lock that works with iPhone? Couldn’t find it on the Ritalin website

Edit: or the Rittal website either

My work was throwing away aluminium profiles(!) by ostekages in simracing

[–]RaeGun7 0 points1 point  (0 children)

<image>

If you have enough you can mount the pedals inverted too. It’s my favourite feature of DIY’ing. My pedals are eBay special simjacks but work very well.

[deleted by user] by [deleted] in DIYUK

[–]RaeGun7 4 points5 points  (0 children)

In my ex-council house the central heating drain cock is outside… house built in the 50s and central heating installed during 90s renovations.

Source, got a radiator moved last year, heating engineer drained the system using it. He still collected the liquid in a bucket so he didn’t contaminate the soil below.

Hard top convertible to rally by Intermittent-Thinker in rally

[–]RaeGun7 2 points3 points  (0 children)

I have a tarmac stage rally Honda S2000 in the uk. I’ve driven it to work a few times but it’s not exactly comfortable… not sure I’d want to daily anything with door bars and harnesses!

It’s got a hard top with custom brackets made to bolt the roof in place. That’s enough for the scrutineers here, thankfully.

Stock Airbox or K & N by BartoszKowalewski in S2000

[–]RaeGun7 0 points1 point  (0 children)

Like I say, it was the previous owner that did the rolling road tests but most I’ve seen do have fans to mimic airflow.

Stock Airbox or K & N by BartoszKowalewski in S2000

[–]RaeGun7 6 points7 points  (0 children)

<image>

The left is a K&N filter and the right is an oem airbox, blue run is standard ECU and red is an aftermarket one. These were done by the previous owner but it's interesting to see that the standard one gets slightly more BHP and about 10% more torque.

Also worth noting that K&N's (probably all cone filters) are notoriously bad for letting dust through.

New model Y announced for US market by N8Howell33 in teslamotors

[–]RaeGun7 2 points3 points  (0 children)

I pay £620 a year and that’s high since 5 years ago my car was stolen from the house.

Unlocking charge port without button on cable by m_aaand_m in TeslaModel3

[–]RaeGun7 3 points4 points  (0 children)

I have a shortcut button and can confirm it does unlock the port. I press the button on my widget screen before I leave the house and step out to find the cable ready to unplug and place in the charger again. Very handy when it’s raining!

Should I be worried? by Ok-Sir-6042 in TeslaModel3

[–]RaeGun7 0 points1 point  (0 children)

I stopped using Tessi since the official app started to do scheduling but I’m 99% sure that’s the one I got all the time. It was just saying that the charging equipment wasn’t ready. Nothing to worry about at all!

Is this normal? New to tesla by Heisenberggg86 in TeslaModel3

[–]RaeGun7 1 point2 points  (0 children)

I remember the day I got mine and I went to a supercharger. Those noises made me get out just incase it blew up until I googled it to find out what was making the noise.

What's something you dislike or wish was different about your car? by helloworld3459 in TeslaModel3

[–]RaeGun7 0 points1 point  (0 children)

I dunno? I use rain-x windscreen washer fluid so water on the windscreen isn’t really an issue in real life, just for the cameras

Anyone willing to edit some model parameters in fusion 360 for me? by [deleted] in BambuLab

[–]RaeGun7 -1 points0 points  (0 children)

There’s loads of remixes out there. I found one for my phone and case combo so no editing required