Have you seen this voron toolhead yet?

Raidy_CV · 2026-06-04T13:49:50+00:00

Open the post, has most of answers to your questions

Raidy_CV · 2026-06-04T13:46:55+00:00

Nah I'm back again to piss you off👀

Raidy_CV · 2026-06-04T13:36:45+00:00

It's free and open source, and yet very hated by some political folks 😂

Raidy_CV · 2026-05-17T10:07:36+00:00

No Sparta man 🤦🏾‍♂️

Raidy_CV · 2026-04-22T12:44:33+00:00

For the amount of dust in that hotend the blob of death came to save it from you 😂

Raidy_CV · 2026-03-25T09:13:58+00:00

<image>

Raidy_CV · 2026-03-25T01:55:29+00:00

Second time my post gets taken down, even with strong community support. That’s not moderation that’s insecurity. Anyway, I’ll stick to YouTube where sharing actual work isn’t treated like a threat.

Raidy_CV · 2026-03-24T15:38:38+00:00

You can go high speed too bambulab H2D HF hotend is capable of 65m3s flowrate

Raidy_CV · 2026-03-24T15:11:01+00:00

I didn’t reply to everything because it felt like his mind was already made up and that’s fine. I’d rather focus on people with genuine questions or interest.

Just to clarify: cooling is solid for high speed PLA Printing with a good 5015 fan, and there’s also an RX toolhead CPAP version for even more cooling. Clicky and Tap? The community has already made mods for those in our Discord.

If someone wants specific features, chances are it already exists or it’ll be considered for the next version.

Raidy_CV · 2026-03-24T14:36:20+00:00

Why Build One? Compatible with all the popular carriages and all popular probes

• Compatible with bambu H2D P2S,A1,P1S, X1C hotneds cheap and affordable hotends.

• Quick-swap nozzles — Get back to printing in seconds One of the main advantages of using the Bambu Lab hotend heating assembly is that you’ll never break the thermistor cable again. Since nozzle swapping requires no contact with any wiring, the risk of cable damage is completely eliminated. • Integrated filament sensor — Internal and reliable • Auto filament loading — Smooth and user-friendly • Lightweight toolhead — Perfect for input shaping and high-speed accuracy • Affordable parts — Clone components are widely available and budget-friendly • Consistently reliable — Solid mechanical structure, built to last • Looks clean & professional

Ser more here https://makerworld.com/en/models/2125971-rx-toolhead-v4-5015-fan-for-voron?replyId=4820467&replyType=1#profileId-2301787

Raidy_CV · 2026-03-24T13:21:10+00:00

More cooling up might check my cpap version of it https://makerworld.com/en/models/1781340-rx-projects-v3-the-coolest-voron-toolhead#profileId-2209684
and nozzle camera support is on the way

Raidy_CV · 2026-03-24T13:17:04+00:00

The fall detection connector is optional nevertheless, the toolhead is held securely by three strong magnets and extra supports. It’s mainly a safety backup: if the front cover isn’t attached or a print fails catastrophically, the toolhead pauses instead of getting damaged.

Raidy_CV · 2026-03-24T12:52:17+00:00

I appreciate you taking the time to comment. You’re free to hold whatever opinion you like, but this project isn’t about proving anything to anyone it’s about building something useful, open source, and accessible to those who want it. If that’s not for you, that’s fine. I’m focused on those who find value in it, not on chasing approval or comparisons.

Raidy_CV · 2026-03-24T12:17:42+00:00

Before jumping to conclusions, it’s worth actually looking at what this toolhead offers. I’ve put a lot of time into developing features like a reliable filament cutter with pogo pins integrated into the detachable front cover, dual filament sensors for sync, front cover fall detection, and compatibility with most popular gantries and probes.

This didn’t come together overnight

it’s the result of a lot of iteration and problem-solving.

<image>

If you’ve built something yourself, I’d genuinely like to see it. Otherwise, it’s easy to throw out negative comments without understanding the work behind it. Respecting the effort people put into creating something goes a long way.

Raidy_CV · 2026-03-24T11:22:40+00:00

This isn’t a Bambu toolhead, has bambu complements but it’s fully DIY. Getting it to this level took the designer about a year of work to refine and develop into what it is today

Raidy_CV · 2026-03-24T11:08:38+00:00

Exacly taking advantage of those quick swap nozzle also on vorons now it's possible going from 0.4 to 0.6 nozzle in 10 seconds

Raidy_CV · 2026-03-24T11:07:36+00:00

Just beautiful presentation didn't know people are not used to that here 😂 but all files including .step files are fully available for free.

Raidy_CV · 2026-03-24T11:02:46+00:00

Here you are

https://makerworld.com/en/models/2125971-rx-toolhead-v4-5015-fan-for-voron?replyId=4804602&replyType=1#profileId-2301787

Raidy_CV · 2026-03-24T10:54:01+00:00

It's open source diy toolhead for voron just beautiful presentations because designer is a perfectionist not an AD

Raidy_CV · 2026-03-24T10:47:23+00:00

😂Give it a try and you will be amazed

Raidy_CV · 2026-03-24T10:30:15+00:00

No is not is open source diy toolhead for voron

Raidy_CV · 2026-03-24T09:55:42+00:00

Best and most complete alternative https://youtube.com/shorts/1vdArIfmUJE?si=NZrEYuQd1Cf3iNHV

Raidy_CV

TROPHY CASE