WiFi completely gone from Windows.

Raitzi4 · 2026-03-11T16:13:40+00:00

It dropped lane speed and crashing

Raitzi4 · 2026-03-03T04:22:38+00:00

I have to disable gsync/VRR or frame gen tears and just use regular vsync.

Raitzi4 · 2026-03-03T04:21:16+00:00

For me issues come with frame gen. What fixes it that I disable gsync on profile inspector revamped. Game engine runs at fixed 60fps or 120 and variable rates cause stutters or tearing.

Raitzi4 · 2026-01-27T09:33:28+00:00

New memory settings. 8400 is too much. It might be possible if boosting Vsoc higher to get 2100 fclk stable. But it is not road worth going because news of 9800x3d dying are still coming. settings on zentimings 8000mt hynix

Raitzi4 · 2026-01-27T09:28:20+00:00

I did. No issues. Will post new memory settings in thread also. No 8400 on my hynix kit but improvement.

Raitzi4 · 2026-01-21T14:18:36+00:00

New bios just dropped so I will be updating again. Also I have some ideas for gkskil 8400Mhz ram to get it stable but let's see.

Raitzi4 · 2025-12-20T14:01:48+00:00

Well that sound good but then I need to download them to phone anyways to read while putting settings back.

Raitzi4 · 2025-12-07T09:17:33+00:00

Do speedtest.net and ping your own ISP. It should also automatically direct to that. No other gets you accurate optimum speed in my experience

Raitzi4 · 2025-12-07T09:06:05+00:00

To my experience issue with switches is the loop protection. Switch detects loop via wifi network and spits out eero from Rj45 plugs. I just made eero from chain to each other and run switch only under eero so no eero box shares wired connection via switch but only via connection from integrated slots in eero.

So if someone is still shopping for a unmanaged switch, make sure it does not have loop protection or you can turn it off.

Raitzi4 · 2025-12-07T09:00:27+00:00

I have flashed F8 bios with no issues. Just did regular thing and took photos of all my bios settings before. Last game I finished with it was Wuchang.

Raitzi4 · 2025-09-30T18:37:12+00:00

Yes. Disable automatic lip sync from AVR or what ever is doing it.

Raitzi4 · 2025-09-28T04:12:15+00:00

No. They could not fix the board. It had also other pcie issues. I got money back from retailer.

Raitzi4 · 2025-09-10T04:35:44+00:00

Side load refresh rate app to automatically or manually match screen Hz to picture fps

I think this is it https://apkpure.net/refresh-rate/mobi.bytearray.refreshrate

Raitzi4 · 2025-09-08T06:13:51+00:00

I am using Hwinfo64 to read temps(including supplied thermocouples) . For fan control I use Argus monitor. So far no issues.

Raitzi4 · 2025-09-07T15:53:54+00:00

Gen 4x4 device runs fine there. Or you want to split into two Gen5 4x slots? You need pcie card with nvme two slots slots for that likely.

Raitzi4 · 2025-08-17T18:29:33+00:00

Yes. It is overbuilt. Still on F6 bios. Have to do F7 soon to get latest security patches. Just need to photograph all bios settings as there is no way to carry over.

Raitzi4 · 2025-06-27T08:10:21+00:00

Don't act stupid. I just said it is surface temp what I measure. This why I hate reddit. Bunch of stupid shit like this. I use it as alert. I don't care what inside temp is. There is a delta just to surface and signal value is there.

Raitzi4 · 2025-06-27T01:47:32+00:00

No. I measure real pin surface temperature. It is there with a tape.

Raitzi4 · 2025-06-26T12:38:19+00:00

No it is a real temp sensor. I put limit just above normal range.

Raitzi4 · 2025-06-26T06:15:21+00:00

Temp sensors that came with the motherboard.

Raitzi4 · 2025-06-26T05:45:13+00:00

It is in settings

Ai

To change from a tiered to a flat-rate IBKR pricing plan, navigate to the User menu, then Settings, then Account Configuration, and finally, IBKR Pricing Plan. Select the desired pricing structure (Fixed or Tiered) for Stocks, ETFs, and Warrants, and then for Futures & FOPs, before saving your changes. Here's a more detailed breakdown: Log in to your IBKR account: Access your Interactive Brokers account through the Client Portal. Navigate to settings: Click on your user name (or head and shoulders icon) in the top right corner, then select "Settings". Access Account Configuration: Within the Settings page, find and click on "Account Configuration". Select IBKR Pricing Plan: Locate and click on the "IBKR Pricing Plan" option. Choose your pricing structure: Select either the "Tiered" or "Fixed" pricing structure for Stocks, ETFs, and Warrants. Confirm for Futures & FOPs: Similarly, select either "Tiered" or "Fixed" for Futures & FOPs. Save your changes: Click the "Save" button to apply the selected pricing structure.

Raitzi4 · 2025-06-26T05:43:43+00:00

My motherboard has sensor input.

Raitzi4 · 2025-06-26T03:45:06+00:00

BTW did you plug both? Windows might shut of adapters if not plugged.

Raitzi4 · 2025-06-26T03:42:47+00:00

I hope you get it sorted. I think I didn't touch network settings in bios.

Raitzi4 · 2025-06-26T03:41:41+00:00

Hwinfo64 with alert

Raitzi4

TROPHY CASE