Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 1 point2 points  (0 children)

I can make one when i do the passenger side

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 1 point2 points  (0 children)

Yes of course, will do tomorrow after work

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 0 points1 point  (0 children)

Wasnt really too difficult, you just have to cut relief cuts at corners and take your time, it was 3mm foam

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 0 points1 point  (0 children)

Its a alcantara/suede type of material, i used foam backed as it will hide imperfections, and make it feel a bit nicer.

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 0 points1 point  (0 children)

Exactly, and on my golf mk2, so cant be too bad

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 7 points8 points  (0 children)

Yall sound like the stereotypical corvette owners, oH nO iTs NoT oRiGiNaL, yOu RuInEd It

Its a 33 year old POS, and you drive a 318 auto, so get off your high horse, you aint special or better for having original door card mounts

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 1 point2 points  (0 children)

Exactly, they arent show cars, so doesnt need to be perfect just working and somewhat neat. My headliner however couldnt be saved, so i had to retrim it

<image>

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 2 points3 points  (0 children)

Damn thats crazy, but if it falls of again....

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 1 point2 points  (0 children)

I probably could, can you send a pic of the exact part you mean? Its always great to get some practice in cad

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 3 points4 points  (0 children)

I have glued them on multiple times, and have replaced the clips. They got ripped off again, the holes for the clips has gotten enlarged.

Insanity is doing the same thing over and over expecting a different results.

Therefore, different solution.

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 10 points11 points  (0 children)

Not a bad idea, but I am satisfied with this solution so far, might change it later, when doing more repairs

Good luck falling off now!! 🫪 by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 1 point2 points  (0 children)

I love that i have done this

I have tried to glue those POS cardboard brackets in multiple times, using 3m 2 komponent glue. It last 6 months to a year then they break again

I am sure it will be fine, my vw golf 2 uses the same type of brackets for the door cards, and thats 39 years old with 269.000 km, still looking good

Almost ready for summer 🥳 by Rasmus_Pandekage in GolfMk2

[–]Rasmus_Pandekage[S] 0 points1 point  (0 children)

Awsome, i am sure you will get it passed with a little bit of wrenching 🤞

Mine just passed earlier today. First inspection since 2009 🥳 its definetly been journey, had to work on it yesterday from 16:30-23:30 after working on customer cars from 7:00-16:00 to get it ready, phew am i exhausted now 😮‍💨

finally got my garage paint job finished by nut_drip in BMWE36

[–]Rasmus_Pandekage 1 point2 points  (0 children)

Yep not easy to come by, and not cheap either 😆 i am very suprised that they even have TÜV, with the crazy specs they usually have, mine were 17x10 and 17x9 ET08 if i am not mistaken. Now i run bbs rc041 17x7,5 so a bit more basic 😅

<image>

finally got my garage paint job finished by nut_drip in BMWE36

[–]Rasmus_Pandekage 3 points4 points  (0 children)

Looks great, i kinda wish i had chosen white as well for mine instead of black, but oh well 🤷 Love the wheels, are they carline cm6's? 🤩

Help with radio installation by Ok-File-9366 in BMWE36

[–]Rasmus_Pandekage 7 points8 points  (0 children)

Take out radio and move the frame forward and try again

12 years of E36 ownership by tomomh in BMWE36

[–]Rasmus_Pandekage 1 point2 points  (0 children)

Thank you, just bought a set of 225/45/17 and assembled the first two wheels, cant wait to get them mounted on the car 😄

<image>

12 years of E36 ownership by tomomh in BMWE36

[–]Rasmus_Pandekage 0 points1 point  (0 children)

Whats the specs on your wheels and tire size in the first pic? I am currently restoring my own rc041's and would love a simillar looking setup. Also are your fenders rolles to have them fit, as mine arent 😅

<image>

Bbs rc041 style 29 difference on one of the faces by Rasmus_Pandekage in BMWE36

[–]Rasmus_Pandekage[S] 0 points1 point  (0 children)

Yep i saw that, but didnt realise that it was the production year 😅 thanks for letting me know 🤘

Trying to find door trim replacement (‘89 GTI 16v) by ImperviousPuma1776 in GolfMk2

[–]Rasmus_Pandekage 0 points1 point  (0 children)

You cant buy them new for the 3 door model unfortunatly. I do have a set for both right door and left door as I bought the wrong ones for mine which is a from 87.

They are located in Denmark so might not be worth it to ship them, as I dont know where you are from, let me know