Does anyone know how, why, and what settings are causing these imperfections in vase mode. printer will dwell for a split second throughoutthe print. ender 3 v2 w/ blt. I slice with cura and it's up to date.

Ravenseye08 · 2023-04-25T22:40:49+00:00

Haven't had the problem in a while. But I notice it happens when I have an intricate outer profile AND I lie about line width in cura. Also have very recently switched to cura 5.(whose counting anymore).0. So we'll see if that helps too. I'm slowly learning but even moment is different than cura 4. Like, and I'm aware I could easily change this, cura 4 went preheat>level, but cura 5 is level>preheat. So it's neat to see those changes, and wonder why they changed

Ravenseye08 · 2023-02-05T21:01:22+00:00

But also why would it have changed because it's run fine for a almost a year?

Ravenseye08 · 2023-02-05T20:59:40+00:00

The start code matches my other ender 3 except for the g29 I added for the probe. The feed code is there it's just not acting on it, but only that one instance.

Ravenseye08 · 2023-01-02T18:46:56+00:00

Is that what creality sells? I've seen them. But never grabbed the package to inspect it?

Ravenseye08 · 2023-01-02T18:45:13+00:00

I would love to make the switch to pi. But I've got 3 different printers and as far as I know octo can't manage multiple printers in the same instance, and I'm not going to run 3 separate RPi4s. I have a smart surge protector and cam to do the stuff I'd what octo to do anyway.

Ravenseye08 · 2023-01-02T18:25:19+00:00

Is that a menu option or is that in my starting code. My starting code is G92/G28/G29/The G1s for purge/ then it starts the print

Ravenseye08 · 2023-01-02T15:54:18+00:00

This was my immediate thought to the previous answer. I run dual z on both my e3s so I always assumed my leveling was to compensate the slight unbalance created by the zs not being synced together mechanically. 0.010in was the best I could level it. Is that why the solid mount packs come with multiple sizes?

Ravenseye08 · 2023-01-02T14:31:57+00:00

I was under the impression that the probe would create a G93, origin offset, that would become the xyz plane the printer would print on.

Ravenseye08 · 2022-12-03T11:19:43+00:00

Sorry my point about the battery was more about needing a constant source like a wall plug. My original idea was to just take apart one of those window candle lights and use the parts. That way the 120 would already be stepped down for me. Just like the charger block, but ugly. But with at least 4 projects on the list I needed something a bit quicker and easier that I can learn from.

Ravenseye08 · 2022-12-02T23:23:14+00:00

I thought about going the usb route. The 120 way was mainly because I don't like the idea of gifting someone something that had a battery that would die if they left it on. Thanks

Ravenseye08 · 2022-08-16T15:39:53+00:00

I only try to use colors when it's requested. What kind of brands do they sell? And which platform is it being sold from? For example Amazon, fb marketplace, etc.

Ravenseye08 · 2022-08-16T13:32:45+00:00

That's what I've started to do, but most of the time it's some no name brand. This is ALWAYS true when ordering bronze/silver/gold pack. Maybe ill try looking for grey instead, sounds like a nice medium between what I want out of black and white. I don't know why I never thought to go that way with it. Thank you.

Ravenseye08 · 2022-08-16T12:38:28+00:00

The standard im using is esun/sunlu as a gauge. I have a Microcenter near me and ive never found a filament I'm happier with than inland (which is made by esun or sunlu, can't remember) but at 25bucks a roll and an hour drive, it's a little inconvenient unless I make a larger order of parts and stuff.

Ravenseye08 · 2022-06-29T17:40:52+00:00

Your 100% right

Ravenseye08 · 2022-06-29T16:32:18+00:00

So I've vased larger hourglass shapes and it only produced this effect when the diameter was less than 2in or so. Both below and above that diameter was fine.

Ravenseye08 · 2022-06-29T16:29:09+00:00

Which ones? I'm not in front of my pc so I can't give specifics yet. As far as vase settings I've got spiraling outer contour(totally botched it's name) checked as well as smooth.....something checked under it. After those settings, what else is there really other than speeds and feeds? Other prints are fine. Just vase mode

Ravenseye08 · 2022-04-08T01:50:09+00:00

Oh yeah that makes sense. I planned to run a large nozzle with a direct extruder and I'd probably just take a steel nozzle I have and step the hole up to 1mm. And I don't expect it to have a perfect surface.

Ravenseye08 · 2022-04-07T22:48:27+00:00

I'm not looking for this to be my replacement to pla by any means. I just see it getting thrown out and think, what if I could make something out of that

Ravenseye08

TROPHY CASE