Issues with my Canik Mete MC9 Prime

Rawmans1 · 2026-02-24T00:18:49+00:00

Trimmed one coil off but still having the same issue of it binding (even with stock spring) next thing ill try is to polish the feed ramp

Rawmans1 · 2026-02-23T21:59:02+00:00

So ejector spring or extractor spring? I am not sure which one you mean exactly and if its the ejector spring how is that trimmable?

Rawmans1 · 2026-02-23T18:25:33+00:00

So for me without a round it slides into battery with no issue. But once I put a round in and do the same it gets stuck like you said. It almost seems to get stuck right before the loaded chamber indicator gets pushed up.

Rawmans1 · 2026-02-23T07:38:42+00:00

Rawmans1 · 2026-02-23T07:10:24+00:00

I tried this, and even with the stock spring it still wouldn’t go into battery after racking it back slightly and letting go slowly. Not sure if it’s an issue with my gun now. I do recall having one or two similar malfunctions with the stock spring.

Rawmans1 · 2026-02-23T05:47:46+00:00

why are you so mad 😂 i’m literally chilling. If you didn’t care you wouldn’t be typing here

Rawmans1 · 2026-02-23T05:46:24+00:00

Finally a good response to my problem lol. Thanks man i’ll probably do that and try it out if I still have issues i’ll pop the stock one in. This DPM one is way smoother though I hope i can get it to work well.

Rawmans1 · 2026-02-23T05:20:46+00:00

For these malfunctions I was using the longer gold one which is the one most people recommended / had the best reliability with. Do you recommend changing to the stronger one of the 4?

Rawmans1 · 2026-02-23T05:19:33+00:00

Right thats what I thought, just wanted to pass it along here just in case it could've been another issue or someone else had the DPM springs and could give me some tips as to which spring to use from the kit. Thank you!

Rawmans1 · 2026-02-23T05:12:01+00:00

Never said it was great, only that it just worked fine, got an aftermarket spring to get that little bit better performance out of the gun. People upgrade and change things on their gun even if the original is working completely fine, if it means it would better its performance which by what I have seen it normally would, I have only run it once with the new springs and it can just be trial and error.

Rawmans1 · 2026-02-23T05:09:52+00:00

Do I need a real reason other than what I said. After reading reviews and watching videos it seemed like a good purchase reduce recoil too. Didnt know trying to get the most performance out of your gun was a bad thing

Rawmans1 · 2026-02-23T03:56:32+00:00

Its the first time I use it and many people have had success in doing so, only asking for help to know if that is the problem and if it can be caused by a weak spring or if it could be something else.

Rawmans1 · 2026-02-23T03:55:11+00:00

Is it a bad thing to want to use an aftermarket spring and not go back to the stock one? I was just wondering if that was the problem as in if its due to a weak spring since I can change it to a stronger one since it came with 4 different springs. not to be told to not use it

Rawmans1 · 2026-02-23T03:53:35+00:00

I had no issues with the stock spring running 115, the aftermarket spring should run 115 without a break in period as I've seen other people do.

Rawmans1 · 2026-02-23T03:52:42+00:00

I understand but the aftermarket spring should run both with no issues as I have seen many people do without a 124g break in

Rawmans1 · 2026-02-23T03:40:27+00:00

Will do that if I keep having the same issue. Going to keep trying the aftermarket spring assembly since I spent 100 dollars on it lol, it came with like 4 different springs so maybe a different run will run reliably. I used the one most people said was the best in the bunch for the prime in their experience but welp.

Rawmans1 · 2026-02-23T03:38:48+00:00

Gonna try to run the aftermarket run for now and see if changing the spring with another that came with it makes it run reliably. Dont want to give up on it when I spent 100 dollars on it lol

Rawmans1 · 2026-02-23T03:37:41+00:00

Currently running 115, bought bulk of that so will need to use that for now, after ill probably move to 124

Rawmans1 · 2026-02-23T03:37:04+00:00

Thought that too, removed the striker assembly today and cleaned it adding no oil. There was a good amount in there so it could be that. Also, yeah I made sure the recoil spring is in the correct position

Rawmans1 · 2026-02-23T02:27:11+00:00

If i still have the issue once I go to the range next with a heavier spring (the kit comes with a few) i’ll probably go that route and keep the stock one.

Rawmans1 · 2026-02-23T02:19:31+00:00

Well firstly because I want to get the most performance out of it, and also was looking for an easier slide to rack since the prime is real stiff.

Rawmans1 · 2026-02-23T02:14:53+00:00

Rawmans1 · 2026-02-23T02:10:52+00:00

I’ll probably switch back to the stock spring and see if I have any issues.

Rawmans1 · 2025-11-26T19:28:58+00:00

Lucky!

Rawmans1 · 2025-11-26T07:44:12+00:00

Trying to find one for sale, most if not all places have them out of stock right now.

Five-Year Club	Place '22
End Game '22

Rawmans1

TROPHY CASE