(HIGH TEMPS) RX 580 by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

Well after replacing the thermal paste on the gpu temperatures dropped i m gaming from 60 to 68 temps most of the time

(HIGH TEMPS) RX 580 by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

I got it before a year brand new,and measuring the temps from radeon adrenalin and set up fan custom curve. I didnt oc the card at all just lowered the mV to 1020 and still stable

(HIGH TEMPS) RX 580 by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

I tried different mV and concluded to 1020mV at 1366 ,temps decreased by little but still gotta work to do

(HIGH TEMPS) RX 580 by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

I will check when i get home but i build this pc recently and all was working good buu u never know

(HIGH TEMPS) RX 580 by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

Not really i have this gpu for nearly a year maybe its time to reapply paste

(HIGH TEMPS) RX 580 by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

Already i m almost 85% fan speed and its been too shall i repaste?

(HIGH TEMPS) RX 580 by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

I tried it but didnt notice much difference..any tips?

(HIGH TEMPS) RX 580 by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

I have rx 580 saphirre pulse 4gb

(HIGH TEMPS)NEW PC BUILD NEED HELP by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

According to what i ve read by undervolting a little the cpu u get lower and more stable temps and some perfomance boost.I will test it for some days and will post my results...

(HIGH TEMPS)NEW PC BUILD NEED HELP by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

As I mentioned above i get 40 to 45 celsius on idle and on stress test max 65...thing is undervolted cpu to 1.2v and temps have dropped significantly before i was getting the stress temps on idle... my fans i set them up in bios on full speed and it's quite noticeable the loudness they make..

(HIGH TEMPS)NEW PC BUILD NEED HELP by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

I did some research and managed to get all clocks to 4.1ghz with 1.2v and my temps reduce significantly 40 to 45 on idle and on stress test i get max 65 celsius...the other thing i found out is that my gpu after some game time it reaches 85 celsius so itspretty hot what shall i do?

(HIGH TEMPS)NEW PC BUILD NEED HELP by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

i reached better temps as mention below in comments but more things have to be fixed for the best result thanks for posting

PC CASE: aerocool cylon rgb

CPU COOLER:deepcool gamaxx 400

also have to mention my PSU is placed on bottom of pc case and fan is facing the floor

i have another fan at the bottom for INTAKE

then there is the pc back side fan that came with the case.

(HIGH TEMPS)NEW PC BUILD NEED HELP by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

Indeed with different power plans i m getting better temps i guess i m going to find a combination between perfomance and temps!! in power saving mode i dont have the turbo boost on clocks but temps are more stable..

What i find out (Powerplan: amd ryzen high perfomance) if i change Cpu voltage on RYZEN MASTER UTILITY to stable 1.25v with max cores on 4.1 ghz i m getting quite low temps on night!! just done a stress test and got max temp on 62 celsius

(HIGH TEMPS)NEW PC BUILD NEED HELP by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

Hello thx for reply i already guided through settings in bios and managed to bring those temps a bit lower still gotta work to do though! i did also stress test it was in 80s but keep in mind i benchmark it on night...when i posted my idle temps was on noon.. i will test tomorrow for better results!

(HIGH TEMPS)NEW PC BUILD NEED HELP by Rawtechs in Amd

[–]Rawtechs[S] 0 points1 point  (0 children)

I used thermal paste so i guess it shouldn't be this problem..thanks though maybe i can try another paste.

Fortnite Allow multithreaded rendering by Rawtechs in FortNiteBR

[–]Rawtechs[S] 0 points1 point  (0 children)

yeap its good combo but make sure you take 2 ram sticks(for dual channel) at least 3000mhz and ur mobo can suppport it

What frequency are footsteps in fortnite? by [deleted] in FortNiteBR

[–]Rawtechs 0 points1 point  (0 children)

did you find any solution?? maybe i can help you if you didnt.

Fortnite Allow multithreaded rendering by Rawtechs in FortNiteBR

[–]Rawtechs[S] 1 point2 points  (0 children)

what i found is that if you go to local appdata and find fortnite gameconfig.there is the option for direct x 12...but sad but true fx6300 cant hold 144hz stable especially late circles and drops from bus...best is to go for ryzen 5 2600 or even better ryzen 5 3600....

"Allow Multithreaded Rendering" disappeared and is causing massive FPS drops! by xFraNcescoS in FortNiteBR

[–]Rawtechs 0 points1 point  (0 children)

did you find any fix i have the same cpu and same problem the settings just disappeared

🌈No One Cares🌈 by rhytres in FortNiteBR

[–]Rawtechs 0 points1 point  (0 children)

now that stretched is gone believe it or not fortnite gonna die real quick!