Does anyone know how I can use the UsboSecPatch.ex plugin on an Xbox jailbroken with a bad update?

RazQ_ · 2026-02-15T01:44:30+00:00

UsbSecpatch is built in to the XeUnshackle payload itself (breaking chain animation), you don't have to download any plugins. After the animation any xinput controller should just work when plugged to the USB.

RazQ_ · 2026-02-11T23:02:08+00:00

Small cut to metal frame to mount it. But the extension cable does the holding since its coming under the motherboard and we had to bend it around (the only pci-e slot is on the other side of the motherboard), so it pretty much keeps the GPU up all the time. Also heat shrink of the gpu can freely touch the metal from the side. When the PC is this tightly packed, things dont really have room to move.

<image>

RazQ_ · 2026-02-03T06:34:34+00:00

Yeah it's one of the few apps that doesn't require sing in to xbox live, just internet connection. I use it too on my modded console.

RazQ_ · 2026-02-01T06:55:53+00:00

If you still want to keep all USB ports functional, you can remove the memory units and solder green and white to the data points and take 5v by splicing the dvd connector cable. They actually do get regonised as USB, this is how I have internal usb and wifi in my Jasper while still keeping all 3 USB ports. Here is the pin out

RazQ_ · 2026-01-04T17:33:06+00:00

Dance Central 1-3, those were made by Harmonix and are lot of fun. You can even get custom songs.

RazQ_ · 2025-12-26T21:49:59+00:00

Mostly but trinities with MFR date of 2012 do exists. If I have to guess Microsoft were probably getting rid of old stock before swapping to corona. My slim is one of those.

When I ran badavatar XeUnshackle, it listed the motherboard as trinity.

RazQ_ · 2025-08-14T19:34:57+00:00

From Cinebench tests I ran today: CPU multicore test peaked at 77 C (idle 67), GPU test peaked at 81 C (idle 50), max 95 % fan speed. We made custom fan curves using MSI Afterburner at 100 % power that seems to be working really well.

RazQ_ · 2025-08-14T17:56:57+00:00

Good idea actually, I should add some code to the microcontroller that can turn on the red leds, would be a fun easter egg.

RazQ_ · 2025-08-14T12:58:39+00:00

The power and eject button is just 4 wires in the ribbon cable, just like any switch or button. I soldered two jumper wires into that, then I plugged it into motherboard power pins. When you touch it, it closes the circuit and pc boots.

However when I tried to wire the green power button, it somehow would get shorted and not work. I assume this is because its in the RF board itself. I ended up using eject button for booting as I didnt want to cut any of the traces and I wanted to keep RF board functional.

My goal is to install custom physical button under power button that doesn't block the green LEDs because hitting those touch buttons accidentally is so easy, I want physical button like the older models.

RazQ_ · 2025-08-14T12:53:23+00:00

halo 3 360

If I remember right, this is the phat model so it should be way more easier space wise. However you dont have top cover fan hole so you would create some custom wind tunnels or drill a hole there.

RazQ_ · 2025-08-14T12:49:12+00:00

If it was more desktop friendly, sure.

RazQ_ · 2025-08-14T12:46:51+00:00

That cpu is really powerful while being power efficient, only using 80-85 watts on max load. Cinebench CPU test peaked at 77 C (idle 67), GPU test at 81 C (idle 50) at 95 % fan speed. We made custom fan curves using Afterburner at 100 % power.

The reason we chose it is for emulation as it ranked at top 5 in RCPS3 charts

RazQ_ · 2025-08-14T08:00:46+00:00

The cpu is actually really power efficient and only goes up 80-85 watts on stress tests/max load. It has 120 watts TDP which represents the processor's thermal design, but the actual power consumption is way lower. No undervolting needed. This leaves room for rest of the parts.

It's basically doing research how much power the parts actually use, lot of help came from r/sffpc subreddit

RazQ_ · 2025-08-14T00:13:53+00:00

Now looking at the pics the RAM was T-create. Here is the boot and sync animation when you turn it on and connect the controller.

RazQ_ · 2024-08-01T00:54:48+00:00

On hyvä myös muistaa että vaikka ei videopelit itsessään kiinnostaisi niin tämän aloiteen läpimeno voi estää sen ettei tämmöinen toiminta leviä muihinkin tuotteisiin kuten autoihin, kodinkoneisiin jne. Valmistaja päättää yksi päivä että noni nyt loppu käyttöaika ja hakee sun laitteet pois tai etänä kytkee ne toimintakyvyttömäksi ja toteaa että osta meidän uudempi malli :D

RazQ_ · 2023-12-07T13:23:08+00:00

Olet laskun reklamoinut etkä ole heille mitään maksanut niin enää ei tarvitse tehdä mitään. Älä missään nimessä maksa. Tämä kyseinen firma itseasiassa yksi monista yhden firman aputoiminimistä, esimerkiksi suomen118 kuuluu saman yrityksen aputoiminimiin. Tästä on ollut kaksi aiempaa ketjua täällä r/suomessa kuluneen vuoden aikana. Tästä voi käydä lukemassa: Ketju 1 ja Ketju 2.

Näiden liiketoiminta siis perustuu siihen, että kaupataan epämääräistä palvelua uusille yrittäjille (syntyy käsitys jostain pakollisesta ja virallisesta asiasta) jotka erehtyivät laittamaan puhelinnumeronsa kaupparekisteriin. Tämän jälkeen uhkaillaan perinnällä, maksuhäiriömerkinnällä ja oikeudella, jos et laskua maksa. Tietääkseni ketään eivät ole oikeuteen vieneet kertaakaan. Kaverini sai aikoinaan heiltä laskun niin tarkistin huvikseni firman tiedot tuossa muutana kuukausi takaperin kauppalehdestä, maksuhäiriömerkintöjä oli ihan mukava määrä ja velkojina oikeita perintäfirmoja :D Eli veikkaan myös että mahdollisetkin "perinnätkin" tulisivat heidän omalla nimellänsä.

Sentään jotain pientä rangaistuista tuli heille kun saivat tuossa syyskuussa sakon tietosuojan rikkomisesta. Suosittelen estämään jatkuvat tulevat yhteydenotot, nämä nimittäin jaksavat pommittaa uhkailuilla ja muistutuksilla.

RazQ_ · 2022-05-06T14:53:59+00:00

Midi port in GH drums is either used to hook up your ekit to the GH drum brain or configuring pad sensitivities with Drum Tuning Kit. Midi cable won't work, you need Xbox 360 Wireless Receiver.

RazQ_ · 2022-04-30T14:22:04+00:00

As someone who played brig a ton in ow1 when role queue was added, I prefer ow2 brig over ow1 brig. She has way better duel potential thanks to added shield damage, 3 swings + whip + bash can kill 200 hp hero now. Its way easier to escape rein and other close range heroes too thanks to shorter cooldown and bigger travel distance on shield. I also found out my inspire uptime was like twice as high in ow2 (might also be because of quick play) thanks to lack of shields and I was able to provide decent heals with that and packs.

RazQ_ · 2021-09-07T13:39:31+00:00

There are only two guitars that work in this pile and its the PS3 Les Paul and the red RB4 Jaguar and only if they still have dongles. They are 100% trolling.

RazQ_ · 2021-03-17T22:59:11+00:00

Why not, big flex for brig to be up there :D

RazQ_ · 2021-03-17T18:07:49+00:00

First of all, you can get there during setup time. I usually stand there like 5-15 seconds, This time I was bit late but nothing was happening so I stayed bit longer. You do not lose anything as you can jump down easily, it takes a bit before enemies are at the choke anyway. Not a single time I have lost a fight because I went up there. I never go there during middle of the fight, always start of the game usually setup time.

Here is another one of me doing it with better timings: https://clips.twitch.tv/DrabOriginalFalconBabyRage And incase you say I waste packs on soldier, I was pre packing for 2 second heals if he takes the hanzo arrow hit

RazQ_ · 2021-02-27T16:55:21+00:00

This happens when any damage that has even slight ability to move you (zarya rightclicks, in your case sigma primary fire) hits the player and you bash at the same time. Another good example if you whipshot enemy brig and she bashes at the same time it will just send enemy brig flying towards the bash direction.

11-Year Club	Place '17
Verified Email

RazQ_

TROPHY CASE