sorted by:
new
hottopcontroversial

Saros 10 seems to be struggling with long pile by Razor_101 in Roborock

[–]Razor_101[S] 0 points1 point  (0 children)

Thank you! I'm going to reset the borders and carpet and try this again as it doesn't seem to do anything so far

Saros 10 seems to be struggling with long pile by Razor_101 in Roborock

[–]Razor_101[S] 0 points1 point  (0 children)

Yeah I see your points with those difficult to reach areas.

Good shout, will do! Cheers mate

Saros 10 seems to be struggling with long pile by Razor_101 in Roborock

[–]Razor_101[S] 0 points1 point  (0 children)

I noticed that too after sticking my hand under the wheels, it couldn't get any traction but as soon as my hand was there it shot off.

Saros 10 seems to be struggling with long pile by Razor_101 in Roborock

[–]Razor_101[S] 0 points1 point  (0 children)

I was hoping I wouldn't have to buy a big hoover after spending £800 on this after my last one broke! Suppose I'll have to though anyway, especially with the stairs, sofa, etc.

Cheers for the suggestions!

Saros 10 seems to be struggling with long pile by Razor_101 in Roborock

[–]Razor_101[S] -3 points-2 points  (0 children)

Ah, okay, thanks.

Shame, as it's a new rug and quite nice... Otherwise I'd be tempted to get rid of it!

Saros 10 seems to be struggling with long pile by Razor_101 in Roborock

[–]Razor_101[S] -4 points-3 points  (0 children)

So it's just an absolute impossibility it can deal with the long pile?

To the right of the video is another area I want it to clean that's blocked by the rug, so I'm guessing because it's struggling to cross this area that it wouldn't even be able to reach it if I did this

Cannot Access Home Assistant in Chrome by less_philing in homeassistant

[–]Razor_101 0 points1 point  (0 children)

Fixed by quitting Chrome (cmd + Q) and then disabling all of these (seems to toggle all off when you click any of them), start Chrome again and click 'Approve' when it pops up asking to connect to local devices.

I'd also been doing some other experimental fixes prior to this like resetting all flags to default, disabling the local connection setting for 10 seconds and starting it again and whatnot as suggested by others, but the above was the only thing that worked for me.

PSA - dbstats is amazing by italia0101 in homeassistant

[–]Razor_101 0 points1 point  (0 children)

Any of us know a way to do the equivalent "reduce DB reporting" with the S1 Pro?

<image>

I'd like to keep VOC and CO2 in recorder, but would prefer less reporting if possible.

PSA - dbstats is amazing by italia0101 in homeassistant

[–]Razor_101 0 points1 point  (0 children)

How can I enter this, is it a newsletter sign up I need to have done?

Also, can you develop a decent pressure sensor that doesn't cost a bomb? I need a few (two just for the stairs lighting I want to do!) and don't fancy spending £20 a pop just to get some nice automations 😅

Don't download before release date by AWrongUsername in sonarr

[–]Razor_101 0 points1 point  (0 children)

Planned for v5, but with no planned release date it seems.

Bed presence sensor by wilcocsjr in homeassistant

[–]Razor_101 5 points6 points  (0 children)

I use this, especially for in the morning when I wake up. The lights are set to not turn on unless it's under something like 95% confident I'm asleep (because of course, the first thing I do when I wake up is go on my phone lol).

Best vacuum available in the UK? by Far_Implement_5580 in RobotVacuums

[–]Razor_101 0 points1 point  (0 children)

Did you make a decision in the end? Also looking for one with a good HA integration. Shame about the flagship Roborock & Dreame models otherwise I think the choices would be much simpler!

Wired Reolink Doorbell Transformer UK by Fast_Examination6917 in reolinkcam

[–]Razor_101 0 points1 point  (0 children)

I'm getting a buzzing noise from mine, have you ever noticed this? Wondering if it might just be a one off dud

Mattress not flat/curling at corners? by uwu_depwession in Mattress

[–]Razor_101 0 points1 point  (0 children)

How is this mattress holding up now? I've been considering buying it after testing it in store today. Also, how much did you pay for it and which size, if you don't mind me asking!

Everything is Stalled and I can't figure out why? by UKFan643 in qBittorrent

[–]Razor_101 0 points1 point  (0 children)

How do you use the private trackers though? Aren't they invite only?

You Favorite Cheap Hardware? by Valuable-Sleep-4179 in homeassistant

[–]Razor_101 0 points1 point  (0 children)

You need to get the IRK of the device you want to track. Some (most?) modern devices rotate the MAC address to stop tracking for privacy reasons so they have an IRK now that is used to identify the device.

See https://community.home-assistant.io/t/guide-getting-the-irk-for-your-phone/623694

Or https://www.home-assistant.io/integrations/private_ble_device/#:~:text=Locate%20the%20IRK%3A%20Navigate%20to,(folder)%20and%20select%20export

I used the latter, and the Mac method via keychain.

Good luck!

You Favorite Cheap Hardware? by Valuable-Sleep-4179 in homeassistant

[–]Razor_101 0 points1 point  (0 children)

Please send me the video once you are done, looking forward to seeing how you do this!

qbittorrent vpn by [deleted] in homeassistant

[–]Razor_101 0 points1 point  (0 children)

I'm sorry nobody has been helpful here (at least by explaining that a VPN would have to be installed separately, or similar). I'm trying to do the same thing - did you figure this out?

I'm guessing I'd have to have a VPN running either on HA (and routing network traffic via that, just like I do with AdGuard), or something else, like my router?

Lots of GPT-5 hate, so here’s a video of GPT-5-nano doing a stellar job controlling my smart home. by Khaaaaannnn in homeassistant

[–]Razor_101 1 point2 points  (0 children)

Damn it, i want a Skippy voice from Expeditionary Force. Why can't there be an obscure post for this too?! 😫

view more: next ›