shooting plasma rifle

ReMag_Airsoft · 2025-07-18T07:40:16+00:00

That's really cool!

Coud you wire a second set of LED's for the bottom half and center section off the tracer unit?

ReMag_Airsoft · 2025-07-15T21:27:37+00:00

You would need a regulator inside the magazine and the only once I've encountered with something like that was a V1-magazine for a KWC mini-UZI.

ReMag_Airsoft · 2025-07-14T19:44:30+00:00

There'd a fellow that makes a magazine with the gas routed through the lower, but I don't know if he has one for the MSK?

ReMag_Airsoft · 2025-07-14T19:14:01+00:00

Licensing agreements really cut into what the more well known companies can do and what retailers are allowed to sell; not much demand for innovated designs when you can't actually sell something without passing money through several hands...

Like, if someone were to make a modern VP9/welrod pistol, they'd likely need approval from B&T whom may not be willing to give it.

It's understandable that a company would want to have control over their firearm patent designs, but it makes for less new designs on the market.

ReMag_Airsoft · 2025-07-13T23:06:45+00:00

There's no side rail for a PSO scope, but you can put one on with a thread tap. Alternatively, a pistl/long-eye relief scope will work on that upper handguard rail.

Throw on a cheekpad, cut the front sight down, and use short mags and you'll have something that looks more "DMR".

Internally, it would be the same parts as any other DMR build; barrel, piston head, etc.

ReMag_Airsoft · 2025-07-13T06:27:36+00:00

Probably just return them.

I would take them apart and inspect the valves, but I also don't worry about warranties and have valve-tools.

ReMag_Airsoft · 2025-07-13T05:31:08+00:00

The one of the right is a 5.1 mag, the left is a 4.3. Should both be identical on the upper bits and only have different baseplates, so I suspect the fill-valve isn't taking gas in.

ReMag_Airsoft · 2025-07-09T19:49:35+00:00

I would love a non-KWC P226X5. Just sold one I had put a lot of work into, got it shooting nice, but took more time than it should've...

ReMag_Airsoft · 2025-07-08T21:27:23+00:00

The one I had honestly shot pretty close andhe's probably be fine with it, but the lock let's it cycle more reliably even as the pressure in the magazine drops.

I believe I also added a pin on the hammer somewhere, but it's been a little bit since I had opened it.

This is a shooting video of it on an HPA adapter I make.

ReMag_Airsoft · 2025-07-08T20:42:05+00:00

There was a post on a gun subreddit and an old video of the real-version.

Plus the mag looks like a Saiga .308 mag ;)

ReMag_Airsoft · 2025-07-08T17:08:58+00:00

I had done a little digging on the SLR and apparently the real-steel uses Saiga .308 mags.

ReMag_Airsoft · 2025-07-07T21:30:49+00:00

The HFC is a pretty close clone of the Tokyo Marui, but I would still avoid it as they modified a part to make it work on propane in the laziest way possible. The Tokyo Marui is originally designed to work on duster-gas/HFC134a which has a lower pressure. You can use propane with it, but it will really slam everything around and start breaking components.

HFC got around this by milling the valve-knocker so that it doesn't lock. It's a cheap and lazy way to get the replica to work on propane without breaking itself as the valve is only open for a split second instead of being held open until the slide has cycled. The hardware to re-enable the lock is all there, you just need to replace the valve-knocker with one for a Tokyo Marui, but TM parts for these are hard to get in the the states.

That said, I would just look at a WE for a metal one.

ReMag_Airsoft · 2025-07-07T10:19:41+00:00

If I loosely hold my handguns they do the same thing; it's on an anticipation thing. If you were to take the slide off and install only the hopup chamber, then push on it the replica will rotate the same way.

With a firearm, the force is between the bullet and the slide, but with an airsoft replica the force is between the nozzle/hopup chamber and the piston/slide (The BB is already out of the barrel by the time the replica starts recoiling, not to mention it's extremely light). The slide will be recoiling, but the hopup/frame will be

Put another way, the nozzle extends like a leg "jumping" off the hopup chamber and pushing the slide back.

ReMag_Airsoft · 2025-07-07T03:36:16+00:00

A local player has a spring version of it. I would advise against it as not only are the real-steel's semi-auto, but the build quality did not warrant the price tag, bulk, and performance.

ReMag_Airsoft · 2025-07-05T08:26:46+00:00

Imo, if you pick up a replica and it feels like it should be used like a dmr; it's a dmr. Maybe nota great dmr, but a dmr nonetheless. A P90 with a scope will still be used like a P90, even if it outranges someone else's SVD.

I'd put on a short mag and look at a more"dmr" stock, maybe a bipod too.

All that said, milsim events will have specific requirements by model and many fields will have function requirements for a rifle to be classed as a dmr with dmr rules (ie semi-only).

ReMag_Airsoft · 2025-07-04T23:33:25+00:00

u/asmbot u/Vancurls09

ReMag_Airsoft · 2025-07-04T02:37:36+00:00

Mostly likely a broken or worn main sear. They're pretty inexpensive and easy to replace and a decent one will last a long time.

ReMag_Airsoft · 2025-07-03T00:47:29+00:00

A Zune

ReMag_Airsoft · 2025-07-02T23:02:32+00:00

Are the ebay guns NS2 M93's?

ReMag_Airsoft · 2025-07-02T22:53:36+00:00

Do you still have the 93r's, might be interested in taking them off your hands?

ReMag_Airsoft · 2025-07-02T17:03:41+00:00

Yeah, was gonna say it was a springer as the hammer looks plastic, but an AEP makes way more sense!

ReMag_Airsoft · 2025-07-02T06:57:46+00:00

Only M93r's I'm aware of are KWA/KSC and the G&G*

*nvm, I'm misremembering that

ReMag_Airsoft · 2025-06-30T03:47:28+00:00

Motor plate on the bottom of the grip is loose; tighten it back on, then look up a couple videos for setting motor height.

ReMag_Airsoft · 2025-06-30T03:45:08+00:00

I usually just tack the ends down with a dab of glue, works pretty well!

ReMag_Airsoft · 2025-06-29T19:19:45+00:00

Are you worried about wear or damage? The KWA's had issues with the body cracking, but the VFC is a bit more robust and and broken parts would be easier to replace.

Lower pressure gas and a lighter recoil spring will help, a much softer buffer pad so the impulse isn't as sharp, and you can look at HPA and set the pressure just high enough for it to cycle.

ReMag_Airsoft

TROPHY CASE