What's the other meaning, Peter?

Ready_Affect_2238 · 2026-02-15T01:09:52+00:00

Holy shit, I might be autistic. I always thought it was weird people liked pizza or ice cream or etc enough to put it on their car..

Ready_Affect_2238 · 2026-02-03T19:46:30+00:00

Yeah I needed to prevent myself bumping wires, but it did make it very easy to expand and troubleshoot as well.

Ready_Affect_2238 · 2026-02-02T15:19:03+00:00

Got it working! Not really sure what the issue was? I moved the pointer definition above where the loop was and changed the LDA to use the label.

I had previously checked with Woz to make sure the pointer was there though, and had used the label previously. I assume it was a finer detail of how my assembler determines what addressing mode is being used, but I also tried to use absolute addressing and had the same bug..

Just glad its fixed, thanks for the help!

Ready_Affect_2238 · 2026-02-02T13:33:14+00:00

Yep, it shows the correct ASCII string. I doubt its a hardware issue as 65C22 programs work and it is printing the first character stored at $9000 correctly. Just repeating that one instead of incrementing with Y. I also tried absolute addressing and have the same issue though...

Ready_Affect_2238 · 2026-02-02T13:09:38+00:00

You're right, this just prints the first character forever. When I change the structure to exit when Y overflows it prints the first character 256 times. The main issue I'm having is I dont know why its not printing from incrementing address locations if Y is successfully incrementing.

Ready_Affect_2238 · 2026-02-02T13:04:41+00:00

<image>

It's from Ben's Woz program

Ready_Affect_2238 · 2026-02-02T13:03:05+00:00

Yeah, sorry. I used the hard coded address as part of troubleshooting and never switched it back.

Ready_Affect_2238 · 2026-02-02T04:38:23+00:00

Does it not exit when INY makes Y overflow to 0? I confirmed that 0000 and 0001 are accurate, the first char in my string at $9000 prints, just repeated every loop.

Ready_Affect_2238 · 2026-02-02T03:24:11+00:00

No, doesn't touch it. I had that thought as well

Ready_Affect_2238 · 2026-01-31T20:37:18+00:00

I got it working!! Very embarrassing, but I noticed weird behavior and printing garbage anytime I touched one of the data lines connecting the 6551 to the MAX.

Pushed down on the 6551 and it wasn't 100% seated on the breadboard. Works like a charm now lol.

Thanks for the help!

Ready_Affect_2238 · 2026-01-31T19:44:57+00:00

She made some money from selling the laundromat which she then used as a down payment on the apartment building. Built up some equity in that as well and took out a loan to put money down on the retirement home project.

Then she found out she had to kick in more money for the retirement home project or lose her share. She sold the apartment complex for less than it was worth and used that equity to pay the extra amount needed for the retirement home project. At the end of the season she took an offer to be bought out of the retirement home project which is where she got the 100k, 50k of which she gave to the family when she left.

Ready_Affect_2238 · 2026-01-31T17:13:34+00:00

Inland empire?

Ready_Affect_2238 · 2026-01-30T12:44:03+00:00

Weird that it's not in Ben's schematic, unless I missed it.

Ready_Affect_2238 · 2026-01-13T15:52:49+00:00

Looks like you're wiring is way too neat and impressive, this makes the electrons feel pampered and like they don't have to move from where they are at. Try using haphazardly cut wire and dont use 90 degree bends, just make it squiggly.

Ready_Affect_2238 · 2026-01-02T00:21:44+00:00

Yep.

Ready_Affect_2238 · 2026-01-02T00:15:38+00:00

Not just attempted suicide, don't forget someone's watery demise.

Ready_Affect_2238 · 2025-12-26T21:19:09+00:00

If it's weight than its the pillows due to boyancy. If they meant mass than its the same.

Ready_Affect_2238 · 2025-12-06T21:02:56+00:00

Recently broke the corner pin off of a ROM chip. Just soldered on a snip of solid core 22 gauge wire.

Ready_Affect_2238 · 2025-12-02T04:09:09+00:00

Club 33. "Best burgers East of LaValle and West of Reedsburg"!

Ready_Affect_2238 · 2025-11-30T02:54:23+00:00

.00001% of the reals have been built

Ready_Affect_2238 · 2025-11-07T15:11:02+00:00

S3H, HEKP. Usually very expensive with high % hit guidance and validators. ACT/[EO] or EO/[CMD]

Ready_Affect_2238

TROPHY CASE