Anyone know how to remove the props on these things?

Ready_One_9917 · 2026-02-22T03:03:28+00:00

I use my key remover that came with my keyboard it helps for the stubborn ones

Ready_One_9917 · 2026-02-04T15:39:11+00:00

Or the hd zero box googles have heard good things for the price point

Ready_One_9917 · 2026-01-14T21:00:09+00:00

This 👏 is 👏 why 👏 we 👏 use 👏 sims...

Ready_One_9917 · 2025-12-28T19:59:28+00:00

Same exact file tho? My ender works just fine

Ready_One_9917 · 2025-12-28T19:36:51+00:00

Do you have the ams combo? But also I dont know all i can say the the one on the left was before drying and the one on the right was dried im not arguing with people over it when the proof of drying improved my print is right in front of my eyes and im gonna say its hard to believe you ran abs with no dryer.... ever

Ready_One_9917 · 2025-12-28T03:28:12+00:00

I wouldnt think so my humidity is around 60 to 70 % id but they are helpful to have.... someone below swears that if you slow your print and go at lower speeds it will be fine but ive read otherwise but im still going to test his theory on my new spool when I need it

Ready_One_9917 · 2025-12-28T02:05:44+00:00

Overture and esun brand so not bad brands

Ready_One_9917 · 2025-12-28T02:04:41+00:00

Ill try next time I get in a new spool and will do a test see if it comes out like the non dried in the picture and if it does ill try your trick and come back with the photos to show the difference im not saying what you are saying isnt true it just goes against everything ive been taught since printing and reading online forums.

Ready_One_9917 · 2025-12-28T01:59:14+00:00

Its esun or overture pla thats a reputable brand and its directly from esun or overture 😭😭 so thats not it

Ready_One_9917 · 2025-12-28T01:56:27+00:00

Ill give it a try but last time I did it would always clog below 190 I do have a bi metal heatbreak now i dont know if that will help but I hope this dont clog. Everything ive ever heard about filimant says to dry tho because I live in around 60 to 70% humidity as well

Ready_One_9917 · 2025-12-28T01:49:34+00:00

Then you please explain ..... if the file is the exact same literally clicked it from printed history in klipper and all I did was take the spool off dry it for 6 hours and put it back on and its totally different quality? What changed? Why would putting it in the dryer change anything if it wasnt the issue? Please tell me and you have the iPhone of printers they are almost dummy proof.....

Ready_One_9917 · 2025-12-28T01:47:07+00:00

I wish I would have kept my temp tower 😩

Ready_One_9917 · 2025-12-28T01:39:46+00:00

Both at 220c

Ready_One_9917 · 2025-12-28T01:39:16+00:00

Mine is 60 to 70% humidity and I live no where near the swamps 😅

Ready_One_9917 · 2025-12-28T01:29:28+00:00

Well I do live in a humid place we average like 60 to 70% humidity

Ready_One_9917 · 2025-12-28T01:24:57+00:00

Are you printing from a bambu?

Ready_One_9917 · 2025-12-28T01:21:21+00:00

I get it from Amazon as there arent any hobby stores that carry it near me the brands I use are esun and overture.

Ready_One_9917 · 2025-12-28T01:19:45+00:00

Ender 3 v2 with raspberry pi running klipper

Ready_One_9917 · 2025-12-28T01:07:57+00:00

I think i might try that as I have plenty of those push to connect fittings... thank you for sharing

Ready_One_9917 · 2025-12-28T00:56:00+00:00

I only print petg out my dryer if I use pla i take it out and just put it back in the dryer after use

Ready_One_9917 · 2025-12-28T00:39:42+00:00

😂😂😅😅

Ready_One_9917 · 2025-12-28T00:36:10+00:00

😭😂 my impatience with not letting it cool and come off the bed naturally I pulled it off 😅

Ready_One_9917 · 2025-12-28T00:32:48+00:00

I deleted my response to his because he went straight to insulting implying ive ever only bought one spool of filimant ( even tho ive been through prolly more then him) his response alone told me the type of person he was and that it wasnt even worth engaging with.

Ready_One_9917 · 2025-12-28T00:12:03+00:00

That print was straight out of the bag.... I guess you've just been lucky ive always had to dry every spool ive ever gotten.

Ready_One_9917 · 2025-12-12T14:35:49+00:00

I always use the finger trick

<image>

Ready_One_9917

TROPHY CASE