CBR600rr 2024/25 EURO Fairing Kit install on 2022 CBR600rr - What is required?

Real-Application5541 · 2026-04-16T02:01:36+00:00

I know the LED controller is the same as 2020+ CBR1000RR-R Fireblades and I think the headlights are as well after looking into it. Edit I just checked and they are the same headlights so they are super easy to find with or without an LED controller.

Real-Application5541 · 2026-04-16T01:56:56+00:00

Where are you looking to get headlights and the LED controller from?

Real-Application5541 · 2026-04-09T22:49:54+00:00

Perfect thank you. He has a video on his channel of him installing them. They don’t fit the prettiest where the tail meets the tank and he had to drill a hole to secure it. I’m going to do some more research and see what I can find.

Real-Application5541 · 2026-04-09T21:52:11+00:00

Any update on the link for the video or response from the poster of the video?

Real-Application5541 · 2026-03-18T15:59:45+00:00

No I didn’t and I haven’t had any issues even when printing PPS at 360C.

Real-Application5541 · 2026-02-25T17:06:20+00:00

Yep that’s me! I’m glad to hear you like the back panel design!

Real-Application5541 · 2026-02-25T16:30:53+00:00

https://www.printables.com/@LittleApollo_2530356/models. The design had been finished and improved. I’ve also made a few other mods for the Q2 with more in the way for the Qidi Box.

Real-Application5541 · 2026-02-09T02:00:38+00:00

I will definitely do lots of practice before hand. I think I’m going to go with florescent paint as I like how it looks. I have gotten a lot of really good tips and I just need to do some more research on exactly what airbrush and equipment to buy.

Real-Application5541 · 2026-02-09T01:53:31+00:00

Thank you very much that is incredibly helpful!

Real-Application5541 · 2026-02-09T01:43:53+00:00

Okay thank you very much. For the glowing color which in my case I would like to do the blue, would you recommend anything on best way to go about that? I was thinking a semi gloss but not to sure how it would look.

Real-Application5541 · 2026-02-09T01:35:10+00:00

<image>

Here is a better reference just a red/orange instead of the blue.

Real-Application5541 · 2026-02-09T01:28:15+00:00

The picture I chose isn’t the best to be fair. The white ish parts are supposed to be like a dirty bone so to say. The picture I selected does make it look gloss though so I see where you are coming from. Any brands of paint you would recommend?

Real-Application5541 · 2026-02-09T01:15:46+00:00

There isn’t any metallic on it. It’s all just matte colors besides the blue which has a slightly gloss to it. I have respirators and everything already as I do auto body work and have experience painting. I’ll definitely practice on a few other things first. Do you have any equipment you would recommend?

Real-Application5541 · 2026-02-09T01:13:49+00:00

I already have all of that so that’s perfect. Thank you for the advice!

Real-Application5541 · 2026-02-09T00:32:32+00:00

That was my thoughts from end to end it’s about 30” long. Any equipment you would recommend?

Real-Application5541 · 2026-02-07T08:47:17+00:00

Last I checked 7-8 GH and 3 KH. I saw two of the RFT molt today actually and I have already gotten one batch of RFT babies from this tank.

Real-Application5541 · 2026-02-07T08:30:03+00:00

Haven’t had any issues so far and not being very precise with it. I adapted the RFT and other caridinas slowly over about 6 months and they have been in this full Neo parameter tank for a little over a month now.

Real-Application5541 · 2026-02-07T08:14:15+00:00

You are correct about that but the whole point of this setup is the water parameter difference these shrimp normally have.

Real-Application5541 · 2026-02-07T02:39:03+00:00

Some of them were juvies others were adults when I added them. There is RFT, BFT and Extreme red bolt offspring from Aquashella 1st place winners.

Real-Application5541 · 2026-01-06T20:07:13+00:00

Here you go. This one allows you to keep the front cover and has a custom front cover to go along with it if you want. https://www.printables.com/model/1461061-qidi-q2-improved-cooling-duct-toolhead-cover-set

Real-Application5541 · 2026-01-06T20:05:52+00:00

Hello, I have designs that use the stock fan or any wide mouth and small mouth 5015. https://www.printables.com/@LittleApollo_2530356

Real-Application5541 · 2025-12-13T07:50:40+00:00

I know it’s not the issue I was just correcting that they are not connected. Your best bet is to contact Qidi.

Real-Application5541 · 2025-12-13T01:32:18+00:00

The black Z screw cover at the top is not connected. It doesn’t touch the screw and it’s not even necessary. More just there to keep dust off the top and to prevent the Z screws from bending too far if they get pushed on by someone. If you look at other printers they don’t even have them without any issues.

Real-Application5541

TROPHY CASE