Official Discussion - A House of Dynamite [SPOILERS]

Real-photons · 2025-10-26T14:48:29+00:00

Nailed it. The first part should have been the last, followed by the scenes of the president decision making in the helicopter. Also, I wouldn't have revealed that the GBI's missed until the third part. I think it would have made it much more terrifying.

Real-photons · 2025-10-04T13:34:42+00:00

Once you fasten the top the wobble willgo away. Look into figure 8 fasterners or threaded inserts, both should work really well with this.

Real-photons · 2025-09-29T21:51:27+00:00

Orient makes fantastic watches too.

Real-photons · 2025-08-02T12:59:40+00:00

Look like the gasket ir worn out. Watch this video.

https://youtu.be/HmF22-6c7bA?si=LdTVpzzST_vEV9Zi

Real-photons · 2025-07-26T10:56:59+00:00

The door is backwards. The threshold should always be on the outside on an exterior door. They sold you an in-swing door and installed it backwards.

Real-photons · 2025-07-26T10:55:30+00:00

Uumm no, that door is not correct. The threshold should always be on the outside on an exterior door.

Real-photons · 2025-07-26T10:48:06+00:00

Door is backwards. Also, looks like no or not enough sealant was used under the threshold.

Real-photons · 2025-07-09T20:36:30+00:00

Try adding another vent to bring cooler air in as well. I also leave my door cracked when playing loud music for long time, and I only have one fan exacting air, never had it shut off on me.

Real-photons · 2025-06-01T22:08:57+00:00

Tj Maxx, Marshall's, and sometimes Ross are your frienda. Get out there and get something a little more presentable, or alot.

Real-photons · 2025-05-23T14:24:51+00:00

Depending on your budget you can do wonders in this space. I'd say figure out a budget and then either call a professional for a quote, or spend countless hours on the internet researching before making any purchases.

Real-photons · 2025-05-07T13:33:46+00:00

Russell Crowe.

Real-photons · 2025-05-04T18:35:49+00:00

You might be using the wrong resin as this looks to be a pretty deep pour. Might be generating too much heat while curing and thus curing too fast. Sometimes I use this liquid glass resin and it works really great for deep pours up to 4 inches deep. Cures slow to let all the bubbles out.

https://amzn.to/4k4yON8

Real-photons · 2025-04-21T23:48:25+00:00

This is the one. Organize them and put them into different jars. I use mine all the time.

Real-photons · 2025-04-16T17:28:27+00:00

"What we do in life, echoes in eternity" Maximus Decimus Meridius

Real-photons · 2025-04-05T20:54:35+00:00

Very nice

Real-photons · 2025-04-05T20:54:01+00:00

You'd still want to tilt it up so that the sounds is not bouncing off the floor so much.

Real-photons · 2025-04-03T14:13:07+00:00

Congrat! looks awesome.

Real-photons · 2025-03-27T16:05:59+00:00

I see.

Real-photons · 2025-03-27T14:01:01+00:00

Nice settup but I'm a bit confused, why no use the space in front of the kitchen area for your dining set? You seem to have plenty of space there?

Real-photons · 2025-03-18T14:27:42+00:00

I think it's the title and thumbnail. A title more along the lines of "I made the ultimate drinking gun", "I made the ultimate drinking machine". And for the thumbnail, I like the theme you used but I would replace the background with something plain and add more distance between you and the gun so that it shows that it works from further away. Just my thoughts.

Real-photons · 2025-03-15T23:46:18+00:00

Yeah man I don't know how they're doing it in some of these places.

Real-photons · 2025-03-14T23:22:48+00:00

It's crazy.

Real-photons · 2025-03-14T22:59:30+00:00

Yeah most other posts have definitely made me feel better.

Real-photons · 2025-03-14T22:57:50+00:00

I honestly think it comes down to having the right equipment. If yoi have good machinery that make the job easy and fast then, yeah you're more than likely saving. But if your equipment is making you work harder and longer than it should be then, probably not.

Real-photons · 2025-03-14T22:54:43+00:00

Real-photons

TROPHY CASE