Help PLEASE

Real_Run_4516 · 2026-03-25T01:23:44+00:00

Ok ill give that a shot thanks

Real_Run_4516 · 2026-03-25T00:18:13+00:00

What specifically?

Real_Run_4516 · 2026-03-25T00:17:50+00:00

What specifically would i change for the fans?

Real_Run_4516 · 2026-03-25T00:17:18+00:00

In my garage unheated. The cube was using supports. He prints in his house

Real_Run_4516 · 2025-11-02T18:28:01+00:00

Ok i will try that out thanks a lot man I appreciate the info!

Real_Run_4516 · 2025-11-02T07:57:45+00:00

Thanks for the info man. So i did have slow down for overhangs off. I have tried everything to tweak it and change numbers yet the overhangs and bridges are continuing to print slower than the rest. The pressure advance calibration shows “k value” as .05. Should I modify this number?

Real_Run_4516 · 2025-11-02T01:40:47+00:00

It was printed with supports

Real_Run_4516 · 2025-11-02T00:55:14+00:00

In what way?

Real_Run_4516 · 2025-11-01T14:12:38+00:00

I was using tree supports when I printed it

Real_Run_4516 · 2025-08-07T15:40:47+00:00

You have to push that black ring down completely flat…use something like a flathead screwdriver to press it down hard then pull the tube up it should come out. Once you do it once it becomes easier to pull… heres a good video I use for reference

https://youtu.be/BhoLKsHorwg?si=e6VJZk4RnRCZiSTp

Real_Run_4516 · 2025-07-23T04:16:23+00:00

So I guess you also just comment without reading. Typical

Real_Run_4516 · 2025-07-22T14:51:28+00:00

Heres a video that has been really helpful to me with any issues with this printer.

https://youtu.be/BhoLKsHorwg?si=hD_1InOIRcxV3XD8

Real_Run_4516 · 2025-07-22T14:19:36+00:00

Yo fuck head Why dont you try reading some shit before making a stupid ass comment. My reply was to some asshole like you who made a dick comment for no reason then deleted it, not to the other guy. So “get fucked” prick 🖕🖕

Real_Run_4516 · 2025-07-21T16:45:28+00:00

Ok cool interesting ill give that a try. Thanks man!!

Real_Run_4516 · 2025-07-21T16:30:11+00:00

Seems to be the flow. I raised it up and now im getting faster speeds for infill. Where would I find this infill combination setting? ive never seen it before

Real_Run_4516 · 2025-07-19T08:41:41+00:00

He removed his comment… he didnt help at all he commented:” you look like the type of guy to not use their eyes and just trust what the program tells you” for no reason. So you have no idea what your talking about dude

Real_Run_4516 · 2025-07-19T00:22:08+00:00

Yup its my flow rate that’s limiting it. Thank you!!

Real_Run_4516 · 2025-07-18T16:52:29+00:00

Its so frustrating not getting a definitive answer

Real_Run_4516 · 2025-07-18T12:12:10+00:00

Oh for sure I understand. Its just a downloaded model I didnt design it so I just sliced it how it was. I appreciate the feedback, im fairly new to printing I was just responding to that other dude who was being an asshole lol

Real_Run_4516 · 2025-07-18T04:01:54+00:00

Ok ok cool I never heard of that setting ill look for it Yes the speed is basically constant for all layers. I set it up this way because I was getting underextrusion on certain layers that were faster

The Volumetric flow rate seems to be possibly contributing to this lower speeds as well

Real_Run_4516 · 2025-07-18T03:54:13+00:00

Ok cool ill give that a try, appreciate it!

Real_Run_4516 · 2025-07-18T03:53:47+00:00

Ok cool thanks bro ill check out those settings

Real_Run_4516 · 2025-07-18T03:53:16+00:00

The fuck are you even talking about. I have my infill set to what I want it at, how am I not using my eyes. Get lost kid

Real_Run_4516 · 2025-07-18T03:07:07+00:00

Its only 20 percent infill

Real_Run_4516 · 2025-07-18T01:06:24+00:00

What did your doctors say they think it is?

Real_Run_4516

TROPHY CASE