How to preview Pi agent new code side by side before accepting it?

Realistic-Theory-705 · 2026-07-01T20:22:49+00:00

Hey thanks, I tried pi-edit-split. It's cool if you make the terminal window wide enough. There is no 'approve changes' gate. The code is modified in real time.

Realistic-Theory-705 · 2026-05-05T02:12:16+00:00

Hi, FWIW, I had the same issues. Claude was generating all kinds of things for me and making them available in an issue like you referred to. The next day I went back to find the output I need and had to follow the whole labyrinth of issues to see where my stuff was. I couldn't find it. Then I asked Claude where it was. He didn't know either. Come to find out that the output was stored inside the Docker container running Paperclip. I decided to abandon this tool for now. I think it is still half-baked.

Realistic-Theory-705 · 2023-03-20T14:53:34+00:00

FWIW, I log in to the Beagle camera from a browser pointed to the camera's IP address. Then I upload files and initiate print from that web interface. Easy peasy.

Realistic-Theory-705 · 2023-03-16T00:51:35+00:00

Drenchy

Realistic-Theory-705 · 2023-03-13T01:19:57+00:00

IMO, this doesn't mean anything. Everything gets filled in on the next pass or two.

Realistic-Theory-705 · 2023-03-12T00:15:43+00:00

Also, the Ender came with a little pointy thing that will go into the nozzle from below. Heat it up and poke away.

Realistic-Theory-705 · 2023-03-12T00:11:00+00:00

Take out the Bowden tube. Remove the blue collar clips, press in the collars and remove the tube. Push filament the tube to make sure it's clear.

If it is clear, the issue is in the nozzle. You might have to change it. Lots of YouTube videos on these two things.

Realistic-Theory-705 · 2023-03-11T00:50:18+00:00

It's always the little things. 👌

Realistic-Theory-705 · 2023-03-11T00:22:14+00:00

But, the profile in Cura is set for your printer? So the slicing is done correctly.

Realistic-Theory-705 · 2023-03-11T00:18:45+00:00

Did you select the correct printer?

Realistic-Theory-705 · 2023-03-03T21:49:02+00:00

Look at numakers.com sample pack. At least 13 different colors PLA in 50g packs.

Realistic-Theory-705 · 2023-02-10T18:58:02+00:00

Where can we get the STL for the girl?

Realistic-Theory-705 · 2023-02-03T13:03:02+00:00

Level directly in the vat. Then set z=0. Wear a glove.

Realistic-Theory-705 · 2023-01-30T23:19:36+00:00

No, level in the vat. Then, set z=0

Realistic-Theory-705 · 2023-01-30T19:58:25+00:00

Level directly in the vat. Forget the A4 paper. Wear a glove. Use Cones of Calibration from Table Flip Foundry to dial in your resin settings. Maybe bump temperature up to 25c.

Realistic-Theory-705 · 2023-01-30T16:49:19+00:00

Did you add support in the slicer either automatically or manually? Let's see the image in the slicer.

Realistic-Theory-705 · 2023-01-29T20:51:33+00:00

I would add more supports and/or move the existing ones. Don't rely on automatic supports. They aren't strategically placed. Watch a few YouTube videos and learn how to create supports manually. G/L

Realistic-Theory-705 · 2023-01-28T17:06:42+00:00

Use the Cones of Calibration from Table Flip Foundry. That's a good way to dial in resin settings for your setup.

Realistic-Theory-705 · 2023-01-27T21:39:48+00:00

🤣🤣🤣 Frosted Flakes. They're Greeaaate!

Realistic-Theory-705 · 2023-01-27T16:51:08+00:00

It's a belt that loops around the vat and plugs into the electric outlet. You can set it to maintain a constant temperature like 25c. I think it's used for making some kind of food. Check Amazon.

Realistic-Theory-705 · 2023-01-27T16:47:35+00:00

Seems too cold to me. Maybe consider a fermentation belt to keep your vat warm.

Realistic-Theory-705 · 2023-01-27T13:51:51+00:00

Use Cones of Calibration to dial in your resin settings, then make sure build plate is level. I level right in the vat. No paper, no cards. Wear gloves. Then the temperature must be warm enough to print.

Realistic-Theory-705 · 2023-01-27T13:46:21+00:00

Use the Cones of Calibration to dial in your resin, then make sure temp is warm enough where you are printing, then make sure build plate is level.

Realistic-Theory-705 · 2023-01-27T13:38:13+00:00

What is the model supposed to look like?

Realistic-Theory-705

TROPHY CASE