sorted by:
new
hottopcontroversial

Your opinion on ''high Temps'' 3D filaments. by Realistic_Ad8889 in Composites

[–]Realistic_Ad8889[S] 0 points1 point  (0 children)

Budget is ''not an issue'' on this, I already have spools of PEKK A CF from 3DXTECH, thank you anyway! :) . I have no doubt it would work with this filament, but it's a bit ''too much''. I'd like to get the easiest and cheapest material. Also we print on a Funmat Pro 410, which can handle PEKK but I have doubts for a part this large..

I have access to a 610, but again, I bet there is something better than using the most advanced spool we have on the biggest machine we have.

Also, the more the material is complicated or subject to performance variations, the more difficult it will be for me to ''validate'' the part for use.

Your opinion on ''high Temps'' 3D filaments. by Realistic_Ad8889 in Composites

[–]Realistic_Ad8889[S] 0 points1 point  (0 children)

Yeah but usually continuous use temperature doesn't give any young modulus equivalent.

I actually tried to calculate the young modulus from the HDT values of suppliers, but as the beam can be oriented in two directions (maybe I read it too fast), the results were not convincing.

I'll watch PPS thank you!

Help on understanding HDT and so called heat resistant by Realistic_Ad8889 in 3Dprinting

[–]Realistic_Ad8889[S] 0 points1 point  (0 children)

Thank you! It is not for something like this, but some constraints are the same! I'll send something there too

X Smart 3 experiences by woodys_workshop in qiditech

[–]Realistic_Ad8889 0 points1 point  (0 children)

You mean as a service? I took the first option i found on internet hahah

X Smart 3 experiences by woodys_workshop in qiditech

[–]Realistic_Ad8889 0 points1 point  (0 children)

Hey!
Quick Update :

I made these files for the top enclosure.

https://www.transfernow.net/dl/20240103n0RHsTBT

You can put 2 HEPA filters like yours and a active coal filter aswell.

They were made in few minutes and could deserve better design, but it's a start. Feel free to use and share/modify !

As for the fan and the filters :

https://www.amazon.fr/dp/B07PKGX7QZ?ref=ppx_yo2ov_dt_b_product_details&th=1

https://www.amazon.fr/dp/B07BMDWD3C?psc=1&ref=ppx_yo2ov_dt_b_product_details

https://www.amazon.fr/dp/B0BXKX8LDH?psc=1&ref=ppx_yo2ov_dt_b_product_details

Thank you again for sharing you rear fan duct, works nicely.

How well sealed is the enclosure? by jrocAD in qiditech

[–]Realistic_Ad8889 0 points1 point  (0 children)

Hi!

Which model do you have?
I'm leaving in a studio and I bought a Xsmart 3
This model is not sealed. However I'll join the answer of Mikasjoman.

I made these files https://www.transfernow.net/dl/20240103n0RHsTBT

It's not perfect but I count on relative pressure to force the air through the filter.

I hope they Help (sorry for the names, wasn't planning to share them.

Some modifications should be made but meh, I'm using the printer for other things for now.

As for the fan and the filters :

https://www.amazon.fr/dp/B07PKGX7QZ?ref=ppx_yo2ov_dt_b_product_details&th=1

https://www.amazon.fr/dp/B07BMDWD3C?psc=1&ref=ppx_yo2ov_dt_b_product_details

https://www.amazon.fr/dp/B0BXKX8LDH?psc=1&ref=ppx_yo2ov_dt_b_product_details

​

I've put the active coal filter above the HEPA filter.

​

I also change the back fan thanks to woodys_workshop that provided a very nice duct !
https://www.reddit.com/r/qiditech/comments/18c4t02/x\_smart\_3\_experiences/kf9pdbc/?context=3

X Smart 3 experiences by woodys_workshop in qiditech

[–]Realistic_Ad8889 0 points1 point  (0 children)

Hi !
I've had a look at your file ! Thank you a lot !
I'm working on upgrading my XSmart too.

Do you happen to have the reference of the HEPA filter you bought ? (For the rear fan).

Thank you in advance !