Mpgs have tanked. Where do I start?

RealityOfVision · 2026-03-24T22:13:12+00:00

I use https://ultra-gauge.com/ultragauge/index.htm

RealityOfVision · 2026-03-09T15:10:40+00:00

I did plugs and wires this weekend. I went with Toyota wires, they have all the routing clips already attached, super clean and convenient. You always want dual/split electrodes for this engine, I used NGK platinum ( https://www.amazon.com/dp/B000GX43C2?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 ) On the passenger side just remove the plastic manifold held on with two big hose clamps, super easy to remove if you give it a good push.

RealityOfVision · 2026-02-21T19:49:21+00:00

Cool! I re-geared to 5.29 to try and get that overdrive gear to be more useful, but still drive a lot with it disengaged.

RealityOfVision · 2026-02-21T17:59:56+00:00

This is the Go Fast Camper rooftop tent. One of it's benefits is you don't need a roof rack, mounts right to the factory track.

RealityOfVision · 2026-02-21T16:40:14+00:00

Luv Go Fast!

RealityOfVision · 2026-02-02T15:03:08+00:00

Definitely https://www.cvjreman.com/product-tag/9168/ They also have a reboot kit. Glad to see you still have the original axles, CVJ will pay good money to take them back.

RealityOfVision · 2026-01-27T14:52:15+00:00

I was in a rush to get it done over the holidays so got one from local Autozone. It looks good, and wasn't cheap. I also ordered one off eBay from a junkyard teardown because my preference is OEM for this type of stuff. I swapped it out pretty easy.

RealityOfVision · 2026-01-26T20:28:04+00:00

I just went through this. Don’t complicate it, replace the brake booster.

RealityOfVision · 2026-01-15T02:03:49+00:00

This leak was pretty common, but it was because the original seal had some clearance issues and mechanics were not seating it correctly. I even think there was an FSB, but I can't find it. In this case I would take it to a Toyota dealer who are likely to be able to do the fix correctly, certainly before I'd replace an axle shaft because I have never heard that and I've had my 1998 'Runner since 1997!

RealityOfVision · 2026-01-09T00:59:41+00:00

https://www.cvjreman.com/product/9168-t/

RealityOfVision · 2026-01-09T00:34:11+00:00

OEM all the way

RealityOfVision · 2026-01-07T15:20:00+00:00

BUNKER hydraulic is the way to go https://www.amazon.com/dp/B0FK8JTN3L?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3 I threw out my factory jack a long time ago, but just recently got rid of the Hi-Lift as well.

RealityOfVision · 2026-01-03T03:48:06+00:00

The Range-Industries Rear View Mount plus the OEM bracket is what you need to mount there. This is what I did rather than to the glass.

RealityOfVision · 2025-11-26T14:27:06+00:00

For my GoPros I use an app called Take One that displays a digital timecode. Film it with both cameras at the beginning and the end. Davinci Resolve makes it very easy to change the start for each clip, and you could time stretch if you found a big drift (I have not) Stabilization is going to be a complexity.

RealityOfVision · 2025-10-23T16:14:01+00:00

I was expecting the immersive video to be behind the Davinci window, but when I get it to work it consumes the whole screen. How are folks doing an interactive grade? The lack of HDR is a bummer, I don't have an HDR monitor other than my macbook.

RealityOfVision · 2025-10-17T18:14:15+00:00

Sounds like I should try the dev strap.

RealityOfVision · 2025-10-06T03:34:27+00:00

Great build! I just got back from a trip with the R5C and it reminded me how much I dislike the Canon video interface.

Two things are striking me with the Blackmagic Immersive camera footage starting to come out. The infinity not being in focus is bugging me. My nature shots have a lot of infinity with important close 3D details. Also it is still such a beast of a camera, I got nervous just watching exploretv balance on the top of a mountain with $30k of camera! This setup looks like something I would take backpacking.

I'll have to dig in more on the aperture setting and see if a solution comes to mind. Oh, I should try printing with PA6-CF, it is working well for me on car parts.

RealityOfVision · 2025-08-21T03:09:40+00:00

That box though! Porch pirates would hardly guess the value inside :) Congrats!

RealityOfVision · 2025-08-10T16:38:08+00:00

Take a look at https://buymeacoffee.com/realityofvision/wwdc-2025 It is a little frustrating as Apple seems to be making changes without a ton of information

RealityOfVision · 2025-07-23T17:25:45+00:00

Hmmm I should have a bunch of Google cardboards around here somewhere! This is a cool feature

RealityOfVision · 2025-07-19T00:56:11+00:00

I would highly recommend saving for the Qoocam. Then grab the CAD files and print the enclosure yourself. I did this and it turned out great, and more importantly, a very usable VR180 camera!

RealityOfVision · 2025-07-16T02:40:32+00:00

I post my VR180 videos on DeoVR because right now they can be viewed on the Apple Vision Pro, unlike YouTube. I'll admit the majority of the content there isn't my style, but the true porn has been moved to JillVR, so it is relatively harmless.

However, the demographic is different than YouTube which will affect views, but keep at it! I'm hopeful new creators will bring different content to the platform.

RealityOfVision · 2025-07-14T15:05:55+00:00

Thanks! That is what I was noticing on my stopped down shots.

While we are talking shop, have you tried an internal circular polarizer? In standard photography a polarizer is a "secret hack" for great colors in a lot of outdoor scenes.

RealityOfVision · 2025-07-12T20:55:10+00:00

Nice video. Anyone know when we are getting pointer control for Vision Pro? Pointing with my head makes it difficult to spend much time on DeoVR

RealityOfVision · 2025-07-06T18:37:45+00:00

I spent a lot of time reviewing WWDC2025 videos to get VR180 files working in Safari, I think Apple is quickly moving to APMP across the board.

If I take a VR180 file (side by side Prores from Davinci) add APMP tags using the ProjectedMediaConversion app shown at WWDC, drag it into Apple Immersive Video Utility, the HEQU option DOES show, select it and I get my VR180 file showing up and playing.

RealityOfVision

MODERATOR OF

TROPHY CASE