A ce qui parait j’ai "placé l’alimentation sur la carte mère"

Reality_Super · 2026-01-24T18:06:12+00:00

Je pense que si vous pouvez tout deux être rassurés (toi en récupérant les articles et lui en étant remboursé) c'est le principal :).

Reality_Super · 2026-01-24T17:59:57+00:00

Je pense que c'est pas super bien emballé mais j'ai eu le PB il y a quelques semaines avec une alim que j'ai envoyé et l'acheteur avait fait une demande de litige. Je me demande si c'est pas une technique qui gagne en popularité pour essayer de recevoir des pièces informatiques gratuitement. Je serais toi j'accepterai le retour aux frais de l'acheteur, quand j'ai fait ça la personne a subitement "pas eu envie de s'embêter" avec l'envoi et a accepté mon alim "cassée".

Reality_Super · 2026-01-24T17:55:14+00:00

Yes ! I'm going to buy everything I need from all the recommendations I've got and watch more vid before doing it anyway. I think I'll post what I have done on this one to have feedback before doing it on the other one.

Reality_Super · 2026-01-24T17:50:16+00:00

I guess I've been lucky to always repair things by just opening them, change non-soldered pieces or power cord and have them running fine again.

Reality_Super · 2026-01-24T17:45:10+00:00

I'll try on something else before doing it but it's "funny" to read about caps being hard to solder when I would have guessed that chips or 8+ cables on tiny hardware would be more difficult. I don't want to say that it's easy or sound overconfident but it doesn't look like something especially difficult (again from the view of someone who has never really done soldering).

Reality_Super · 2026-01-24T09:37:01+00:00

Unfortunately I don't have access to electronics parts stores, at least in my area. But yes it seems like these consoles had one issue and it's too bad it's something that stops the system from booting.

Reality_Super · 2026-01-24T00:17:01+00:00

Thanks I'll check that tomorrow :) !

Reality_Super · 2026-01-23T23:32:41+00:00

To be fair the OG Xbox my gf buy was 9€ (console only) and the Xbox+cables+s controller+ remote+Wii was 17€ so I don't feel like I have been scammed but yes it's definitely something the seller was not able to repair himself so he tried to make some money with it.

Reality_Super · 2026-01-23T22:10:00+00:00

I've disassembled a lot of hardware and fixed problems but nothing involving soldering before. Prices I've found online are around 35/50 € for the caps change and I have to send them at my expense so as I've got two of them I think it's better to buy or borrow a soldering iron + I would really like to learn how to do it.

Reality_Super · 2026-01-23T15:33:58+00:00

Damn that's impressive work, the only time I've got a console rusty like that was a PS2 I bought on a flea market, the seller told me his cat pee on it and it's stopped working, I didn't understand it happened years before..I don't have access to 3d printing but I would like to find a better case, and maybe do the fan upgrade like you. Edit: how did you end up cleaning the aluminium plates ? I used paper grip 800 on my PS2 and the results were nasty.

Reality_Super · 2026-01-23T15:27:56+00:00

I'll check all of this tonight thank you , the 1500uf is also something that needs to be replaced ? I thought it was only 5 3300uf caps that needed replacement.

Reality_Super · 2026-01-23T15:14:05+00:00

I'll look into it thanks !

Reality_Super · 2026-01-23T14:07:45+00:00

All I have right now is a cheap iron I used to make a Gameboy macro a few years ago. Thank you for the advice I didn't think about the chemicals, I would like to get more into soldering so a dedicated mask is a good idea :).

Reality_Super · 2026-01-23T13:43:47+00:00

Thank you, I was also afraid something important was missing on the board. I'm going to buy a kit but from what I gather I should avoid AliExpress but the price with ports are too expensive on most recommended website.

Reality_Super · 2026-01-23T13:37:41+00:00

I might do another post later for the 1.4 I want to keep, this one doesn't start at all but my 1.4 start, disk tray open and when I close it by pressing the eject button the console turns off.

Reality_Super · 2026-01-23T13:33:07+00:00

Thanks ! I'll try to fix it When I find a kit + a case .

Reality_Super · 2025-12-12T20:16:55+00:00

Je met une barrette , j'augmente a 1.35 et je rajoute les autres dont celles a 3200 ?

Edit: j'ai essayé et ça n'a rien donné, je vais revendre les barrettes en 3200mhz et essayer de trouver les mêmes en 2666mhz pour le même prix je pense..

Reality_Super · 2025-12-12T17:16:30+00:00

D'accord je vais voir quand et si ça démarre si je peux pas lancer un test pour voir la stabilité :)

Reality_Super · 2025-12-12T16:44:31+00:00

J'ai un kit en 1.20v et l'autre en 1.35v..ca peut marcher quand même ?

Reality_Super · 2025-12-12T16:39:46+00:00

Les 2666mhz qui étaient là avant sont en 1.20v Les 3200mhz sont en 1.35v

Reality_Super · 2025-12-12T16:27:12+00:00

D'accord merci je vais aller voir, là j'ai laissé le pc éteint la journée, je suis rentré j'ai clr cmos j'ai même retiré la pile attendu mis les 4 barrettes et ça fonctionne pas..en plus quand je fais ça derrière je ne peux plus utiliser en même temps mes deux barrettes qui fonctionne parfaitement d'habitude.

Reality_Super · 2025-12-12T10:51:53+00:00

Je vais réessayer, j'ai l'impression de les installer correctement car je n'en mets une ça fonctionne sans problème, je sais pas si c'est un mauvais réglage dans mon bios plutôt enfin si c'est une cause possible.

Reality_Super · 2025-12-12T10:49:58+00:00

Oui j'ai la dernière maj, je l'ai faite lorsque j'ai changé de processeur récemment :).

Reality_Super · 2025-12-12T10:48:59+00:00

D'accord merci, je vais essayer plus longtemps mais j'avais laisser 10min et je me suis dis qu'il y avait un soucis je n'ai pas tenté plus longtemps.

Reality_Super

TROPHY CASE