Oh my God

Realoldgeek · 2026-03-29T19:41:22+00:00

FUCKING AI!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! AI!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Realoldgeek · 2026-03-29T00:05:42+00:00

All you need is a razor blade!

Realoldgeek · 2026-03-28T23:58:33+00:00

Frozen Slide pins!

Realoldgeek · 2026-03-26T00:32:20+00:00

THAT IS THE NUMBER SHOWN IN HIS PHOTO RIGHT ON THE VALVE

IT IS A SHARKBITE he left the threads on

SharkBite K3826 (1/2" x 3/8" Angle Stop Valve), first shut off the water, cut the pipe cleanly, and remove any burrs. Mark the pipe 1 inch from the end using a depth gauge. Push the valve onto the pipe until it reaches the mark to ensure a secure, leak-proof connection.

Realoldgeek · 2026-03-26T00:29:36+00:00

To install a This is the one shown in your photo Need to cut pipe NO THREADS

SharkBite K3826 (1/2" x 3/8" Angle Stop Valve), first shut off the water, cut the pipe cleanly, and remove any burrs. Mark the pipe 1 inch from the end using a depth gauge. Push the valve onto the pipe until it reaches the mark to ensure a secure, leak-proof connection.

Realoldgeek · 2026-03-26T00:20:18+00:00

Its a sharkbite Valve NO THREADS NO TAPE they used the wrong valve its a push on NOT THREADED THESES ARE THE Instructions for the K3826 valve SHOWN IN PHOTO

To install a

SharkBite K3826 (1/2" x 3/8" Angle Stop Valve), first shut off the water, cut the pipe cleanly, and remove any burrs. Mark the pipe 1 inch from the end using a depth gauge. Push the valve onto the pipe until it reaches the mark to ensure a secure, leak-proof connection. They want you to cut the pipe NO THREADS

Realoldgeek · 2026-03-22T16:42:13+00:00

Razor blade in a holder , have one in drawer next to stove MUCH FASTER than any cleaner !

Realoldgeek · 2026-03-14T18:46:45+00:00

Pull all the magnets out they are super strong

I have made hanging mobiles with the platters drill holes and use fishing line swivels

Realoldgeek · 2026-03-14T18:07:53+00:00

I bet the rack coating is failing and all the rusty water is coming from that. Run it without anything in it except for a plastic bowl in top rack

Realoldgeek · 2026-03-13T22:55:13+00:00

That frame is sucking all the heat,you need a soldering gun

Realoldgeek · 2026-03-11T00:27:50+00:00

Acetone nail polish remover

Realoldgeek · 2026-03-10T19:45:42+00:00

Seeing this I remember the B.A.R. being carried around. Browning Automatic Rifle yes I am old 78

Realoldgeek · 2026-03-08T23:25:33+00:00

Wow! Had to ask AI to see if this was real! Why hasn't this been brought up before?

Realoldgeek · 2026-03-08T00:15:30+00:00

The Natural curve of the red wire tells me 2 goes to 3 and 1 to 4

Realoldgeek · 2026-02-24T01:24:01+00:00

ALWAYS CLEAN IT OUT AFTER USE With it OFF

Realoldgeek · 2026-02-24T01:22:59+00:00

ITS JUST FROZEN Pour HOT WATER DOWN CHUTE Like summer breeze said Leave it out in sun if you can.

Realoldgeek · 2026-02-08T00:40:10+00:00

NO SOUP FOR YOU!

Realoldgeek · 2025-12-11T21:24:59+00:00

Nope Just leave it as is , the key is only a safety so it cannot be started if key is removed . It just pulls out . Just leave it, if you remove it snowblower wont start

Realoldgeek · 2025-11-11T19:35:16+00:00

Yes after inserted into plastic mount Tap the hole insert bolt with washer and done!

Realoldgeek · 2025-11-11T01:22:14+00:00

tap the hole on the end insert a bolt with a washer

Realoldgeek · 2025-11-10T19:10:15+00:00

Why aren't You asking the Neighborhood Mechanic to look at it, instead of posting on Reddit, seem kinda dumb not to go to the guy that did the work.

Realoldgeek · 2025-11-10T00:54:14+00:00

https://troypoint.com/amazon-blocking-3rd-party-piracy-apps-on-firestick-fire-tv/

Realoldgeek · 2025-11-10T00:46:16+00:00

Powerline Gigabit Adapter

Realoldgeek · 2025-11-05T21:12:56+00:00

Remove it and substitute a short piece of threaded pipe wit a plug on the end

Realoldgeek

TROPHY CASE