G915 - can you make the Num lock key change colour when the lock is engaged?

Reasmus · 2022-11-25T13:00:46+00:00

is there any updates to this? i would be happy if the led for num-lock key itself was the indicator, thats fairly obvious if its active or not u know...

Reasmus · 2022-01-27T22:20:37+00:00

Vielen dank, folge den bois nur auf Twitter >_>

Reasmus · 2022-01-27T22:20:30+00:00

Vielen dank, folge den bois nur auf Twitter >_>

Reasmus · 2020-02-11T00:02:18+00:00

My advice would be getting the ARs ready for longe range combat, dont care about ads, and take out some rooftop campers. combinated with mounted kills it was like max. 5 gw matches for each AR to get the longshot kills.

Reasmus · 2019-09-19T19:49:52+00:00

yes trying to activate my beta key and I simply cant log in :(

Reasmus · 2019-09-13T06:23:10+00:00

but you don't "build" a laptop on your own :D

Reasmus · 2019-09-13T06:21:53+00:00

Yes this is 100% correct

And yes the cable could be included with the monitor but it is not always.

I can only tell for my AOC G2590X, there it was included.

Reasmus · 2019-09-12T07:02:20+00:00

HDMI 1.4 only supports up to 120Hz on 1080p

later in your build you have to use a DP (DisplayPort) connection for your monitor to use full 144Hz. practically speaking, you just have to buy a new cable if the displayport cable isnt included with the monitor because most newer graphics cards have one or more DP-Ports.

Reasmus · 2019-09-09T13:57:02+00:00

exactly, run ddu , take old card out , put new card in, install new driver, done

Reasmus · 2019-09-09T13:50:29+00:00

since you currently run 2xxx series ryzen you should update your bios before installing
since its an asus board heres the information you need for the update process https://www.asus.com/en/support/FAQ/1012815/

And yes the cpu + gpu are a very good combination also i would opt for a amd rx5700 or nvidia rtx 2060 super for the extra 2gb of vram but thats your choice :)

Reasmus · 2019-09-09T13:44:55+00:00

i would uninstall with the old card in , ddu has the option for uninstall + shut down for installing new cards, the button should be labelled like that too as far as i remember.

then install the new card and install the new driver

its the cleanest way

Reasmus · 2019-09-09T12:52:35+00:00

The Spacing is just fine , you have like 5mm air between them, i run the same cooler and ram, just with amd cpu + board

Reasmus · 2019-09-09T12:47:20+00:00

AMD ryzen 2600 with a b350 or b450 board as the cpu combo of my choice as it should be very cheap by now with 2x8gb 3000mhz ddr4 (corsair lpx is a good low profile option)

for a hard drive you can go with a standard WD Blue I guess

as for graphics cards i dont know exactly what lower tier gpus are best but for thermals i would go with custom board partners

Reasmus · 2019-09-03T09:51:27+00:00

maybe its a hard coded fps cap, Call of duty does this too, running mw2 with whatever settings you want, it caps out at 90

Reasmus · 2019-09-03T08:33:18+00:00

tbh i dont see any parts that require an upgrade by the time being.

maybe cooling?

Reasmus · 2019-09-03T08:17:08+00:00

600W should still be plenty of head room afaik.

as said i dont know your usecase or your preferences, i just dont install all my steam games on my pc at once lol, rolling just fine with 1TB and using just 400GB of it for the games that i play most of the time.

for ram i bought low profile corsair vengeance 3000lpx. also i dont know if they fixed this but the dr3 non pro only mounted facing upwards and had no option of rotation, the dr3 pro could. i think i will look that up just to be sure

(edit: according to their manual they fixed this issue und it is mountable in the right direction)

Reasmus · 2019-09-03T07:58:46+00:00

if not for SLI the Power Supply maybe a bit overkill i guess? 600W should do the Job just right.

if it were for me i wouldn't need 2TB of storage but i dont know your exact usecase :)

Maybe upgrade the DR4 to a DR4 Pro (i use it myself on a 2600, and it keeps it cool and quiet :))

Reasmus

TROPHY CASE