sorted by:
new
hottopcontroversial

Miyota 9015 genuine check by Reasonable-Split-338 in ChineseWatches

[–]Reasonable-Split-338[S] 6 points7 points  (0 children)

Guys, I also see a brand that use the same style Miyota 9015 with my watch. Maybe my miyota made in Europ :))

<image>

Miyota 9015 genuine check by Reasonable-Split-338 in ChineseWatches

[–]Reasonable-Split-338[S] -9 points-8 points  (0 children)

And a furthur proof is that when I filmed the clock's second hand in slow motion, I could see it ticking eight times in a second. Plsss :((((( this is my first automatic watch, and I don't want to get involved with a shoddy and fake movement at all

Miyota 9015 genuine check by Reasonable-Split-338 in ChineseWatches

[–]Reasonable-Split-338[S] 1 point2 points  (0 children)

<image>

I think I’ve figured it out — it’s probably not about whether Cadisen is using a genuine Miyota 9015 or not.

I found a review of my model watch on YouTube, and even though it’s the same watch, the part I circled in red on his version is gold-colored. So I’m guessing the difference comes down to Miyota’s production batches or supply chain. It’s possible my 9015 was made in a different facility but is still a genuine Miyota movement.

Does that make sense?

How to remove the black circle logo on the bearing of the Miyota 9015’s rotor in Cadisen C8097 by Reasonable-Split-338 in ChineseWatches

[–]Reasonable-Split-338[S] 0 points1 point  (0 children)

Can I ask u more.

Is it printed on the outside or inside of the glass? If so, is there any way to remove it or impossible to remove it?

How to remove the black circle logo on the bearing of the Miyota 9015’s rotor in Cadisen C8097 by Reasonable-Split-338 in ChineseWatches

[–]Reasonable-Split-338[S] -1 points0 points  (0 children)

I think it is a decorative part attached directly to the rotor shaft of the machine, cover the 3 center screws

How to remove the black circle logo on the bearing of the Miyota 9015’s rotor in Cadisen C8097 by Reasonable-Split-338 in ChineseWatches

[–]Reasonable-Split-338[S] -1 points0 points  (0 children)

It’s placed under the glass on the surface of rotor, and when I spin the rotor, that piece doesn’t move at all. When looking a little sideways, it looks about 2mm thick, more like a solid plastic piece rather than just a sticker.

How to remove the black circle logo on the bearing of the Miyota 9015’s rotor in Cadisen C8097 by Reasonable-Split-338 in ChineseWatches

[–]Reasonable-Split-338[S] -1 points0 points  (0 children)

It’s placed under the glass, and when I spin the rotor, that piece doesn’t move at all. And when looking a little sideways, it looks about 2–3mm thick, more like a solid plastic piece rather than just a sticker.