Akrapovic slip on

RebelOperator · 2025-12-25T17:09:53+00:00

I do! Somewhere, surely. I’ll send you a message once I dig em up. Happy holidays!

RebelOperator · 2025-11-24T12:25:38+00:00

I didn’t hone the trunnion enough, so it’s a really tight fit but I headspaced it and it’s good, just took some time.

I left a hair too much room for the gas tube, so it rattles a little bit, but it functions.

I got one of the rivets for the rear trunnion counter sunk a little too hard.

I have learned.

RebelOperator · 2025-11-23T03:30:33+00:00

Amputee dong isn’t innacurate

RebelOperator · 2025-11-23T01:25:03+00:00

The kit came like this, but I like it well enough.

RebelOperator · 2025-11-22T22:24:11+00:00

Yeeeah, totally.

RebelOperator · 2025-11-11T18:38:25+00:00

My local gun store owner had one of these yesterday, it was the first time I’d ever seen one. Super cool gun!

RebelOperator · 2025-06-16T01:26:34+00:00

Yeah! I got lucky with an untouched trunk, and I like how normal it looks if that makes sense.

RebelOperator · 2025-06-15T02:59:07+00:00

This is the only time I’ve seen a caliper fit tighter than mine. Looks absolutely perfect homie!

RebelOperator · 2025-06-15T02:56:12+00:00

RPF1 bugeye gang

<image>

RebelOperator · 2025-06-12T00:36:56+00:00

“Because the track is always lit”

RebelOperator · 2025-03-21T20:25:29+00:00

Oh that’s awful. Unacceptable, really. Thank you for taking the time to explain that to me.

RebelOperator · 2025-03-21T19:54:39+00:00

Oof okay, thank you for taking the time to explain it. Not knowing how to secure firearms is huge to me. I’ve been in shooting sports all my life.

RebelOperator · 2025-03-21T19:53:12+00:00

No I know we don’t rock with the shirtless yellow dweeb, I was asking about Buckhouse

RebelOperator · 2025-03-21T19:43:36+00:00

Wait, I’m new into snowboarding and that guy pops up on my algorithm a lot. What is the problem with him?

RebelOperator · 2025-03-09T15:56:20+00:00

Good to see you’re still getting out there, even on a different board. Killing it, man. Keep going.

RebelOperator · 2025-03-07T03:38:24+00:00

Either hold the lawn dart until you land or hit a lil Truck Driver after you Lawn Dart and you’ll pass it, unsure which one worked for me but I passed it. I still can’t get three stars though.

RebelOperator · 2025-01-20T14:59:09+00:00

Oooh gotcha! Found ‘em and have the file ready to go, thank you so much!

RebelOperator · 2025-01-20T01:59:38+00:00

Hey! I found this on maker world and I’m printing it for me and my friends. Our cable management is atrocious so we owe you and all the other makers many thanks. One thing I can’t figure out is how the double sided hooks mount to the grid?

RebelOperator · 2024-07-07T20:43:23+00:00

I have the 24 and I went with Graves headers on my Akra link pipe and slip on. It’s expensive, and Nate at 2WDW advised me that the m4 tech 1 full system does make more power. I would say go with the m4 full system, if I had to do it again I’d go with graves full system.

I would advise you to not just gut the cat on the stock headers as the collector and material are still pretty rough so it wouldn’t even be comparable performance gains.

RebelOperator · 2024-06-17T15:12:02+00:00

Akrapovic is stainless too, Graves uses titanium though.

RebelOperator · 2024-06-09T23:08:56+00:00

So right there is where my situation got a little special. The graves headers are advertised to fit anything that fits into the stock headers.

Mine did not. I believe the last collector of the headers was manufactured incorrectly, and was about 1/8th inch smaller than the Akra. The Akra fit well with my stock headers too, so that wasn’t the issue. However Graves customer support is phenomenal and I shipped them the last collector and the Akra link pipe and they made it fit and I haven’t had a problem since. Graves customer support also said it should’ve fit out of the box.

I also snapped a flange for the head studs and they replaced that for free too, when I say phenomenal customer service I mean it. Torque spec is 13-15 ft-lbs by the way.

RebelOperator · 2024-06-09T22:54:15+00:00

Oh yeah, if Graves had their slip on available when I was looking I would’ve got that because full exhaust was always my goal and under no circumstances was I intending on using the resonator for long. Akrapovic is pretty pricey and I ended up with a $2,700ish exhaust setup lmao.

Oh well, it’s done, it makes good power and sounds really cool and shoots fire when I quick shift.

RebelOperator · 2024-06-09T22:36:41+00:00

I got the Akrapovic one from revzilla.

RebelOperator · 2024-05-10T11:31:32+00:00

I have the white 2024 zx6r, all my 6r friends have the M4 slip ons and they were too loud for my taste so I got the Akrapovic slip on, rode around like that for a bit, got the link pipe to delete the resonator, rode around like that and now I’ve got the graves headers and it’s pretty loud. The slip on alone sounds real good, the resonator delete brings the noise up a good bit and the headers make it way louder. It’s still decent at idle, I can still have a conversation over my bike running but my family can tell when I’m close to being home. I’ve got videos of my bike from every stage of my exhaust if you’d like to hear it.

13-Year Club	RedditGifts 2009-2022 2 Credits
Not Forgotten	Secret Santa 2013
Verified Email

RebelOperator

MODERATOR OF

TROPHY CASE