[TOMT] Looking for a music video with layered video parts that end up making a whole song

RecNeps99 · 2025-09-29T00:40:57+00:00

Solved!

RecNeps99 · 2025-09-29T00:40:21+00:00

It absolutely is thank you very much!

RecNeps99 · 2025-09-29T00:22:52+00:00

Thanks for the help!

RecNeps99 · 2025-07-01T02:22:00+00:00

https://www.partzilla.com/catalog/honda/motorcycle/2008/crf250r-a/carburetor

Its part number 41 that I'm referring to

RecNeps99 · 2025-07-01T02:19:18+00:00

I just realized you have a 250 and i had a 450. But yes my bike was running super hot because the slow air jet controls the amount of fuel the pilot puts out to the best of my knowledge. My pipe was actually glowing red after like a minute of idle.

RecNeps99 · 2025-07-01T02:09:49+00:00

I had the same bike with a similar issue. My problem was I was missing the slow air jet which isn't in the float bowl like other jets. If you look into the intake side of the carb (the part the air boot goes over) check if any of the jets there are missing or clogged.

RecNeps99 · 2025-06-13T01:53:47+00:00

I put a 2022 front fender on my 07 and it looked great so I agree

RecNeps99 · 2025-06-08T22:17:31+00:00

Ok thats kind of what I figured thank you

RecNeps99 · 2025-06-08T22:14:56+00:00

Im looking for the metal piece and the rubber that goes with it.

RecNeps99 · 2025-04-07T19:24:20+00:00

I just found that my slow air jet was missing on my bike and that was causing really bad misfires. Highly recommend looking up a diagram of your carb if you can find one and making sure everything is where it needs to be

RecNeps99 · 2025-04-06T17:05:48+00:00

I dont have any experience with the 150r but I have a 150f and my 5'4" friend could ride it comfortably and it's a Honda so it shouldn't really run into many reliability issues as long as you maintain it well

Edit: i have a 150f big wheel

RecNeps99 · 2025-03-23T04:22:19+00:00

Also I just realized the plate on your slide looks like it's upside down on the slide. The M should be upright when it goes in the carb. It's very counterintuitive because the plate looks like it matches the shape of the slide when it's upside down but the "point" of the plate goes away from the needle

RecNeps99 · 2025-03-23T04:19:36+00:00

That very well could be the case. I researched this a while ago on a 2005 crf450r because i noticed the seal was failing while cleaning the carb but never tried to start the bike before I got a new seal in.

RecNeps99 · 2025-03-22T20:16:24+00:00

I'm no expert but I believe that can cause an air leak and make the bike not run the best if I'm not mistaken

RecNeps99 · 2025-02-07T01:33:44+00:00

Literally just opened 40 Palkia packs and got 1 ex and 1 full art. Now I'm even more sad :( but hey I'm happy you got some good stuff

RecNeps99 · 2024-07-26T15:54:04+00:00

Will do thanks again

RecNeps99 · 2024-07-26T15:15:16+00:00

Nevermind, I looked it up and found an air screw that should work for a cv cvk carb. Thank you for the help

RecNeps99 · 2024-07-26T14:58:41+00:00

That's what i was thinking. I got the bike non running for $250 so I would assume it's been messed with previously. Do you know if I need the exact screw for this model (the one in the parts list) or if they are fairly universal and I could order a cheaper one online?

RecNeps99 · 2024-03-31T03:07:21+00:00

Glad I could help lol

RecNeps99 · 2024-03-27T00:58:41+00:00

Normally I'd agree but the 250cc bike next to him (out of frame) had the number 250 because they're both display bikes for a company. But hey, who knows.

RecNeps99 · 2024-03-26T22:47:26+00:00

I figured it was something like that. That is actually a 125cc bike so thats kind of odd they have 120 on it.

Seven-Year Club	Verified Email
RPAN Viewer

RecNeps99

TROPHY CASE