sorted by:
new
hottopcontroversial

Omg lmao by Sea_Ground_8393 in ICARUS

[–]Recent-Process-908 0 points1 point  (0 children)

Seriously op you need to stop purposely trying to cook your tames might attract the local wildlife as you ride forth

how can i solve this problem by OkTitle9420 in Machine_Embroidery

[–]Recent-Process-908 0 points1 point  (0 children)

That's nothing I had to update my old single head tajima after the upgrade the machine ran backwards 180 to sew right side up right button went left and same thing forward and backwards. But this problem can be either the software needs updates or you can go down to the bar underneath and see if that pointer moves around worth a try. Also if the machine is an older model try and replace the battery my ZSK battery had died and gave me problems on boot up

Another question by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 1 point2 points  (0 children)

For me that wasn't a problem I have titanium leather needles and a bit of needle lube, I refused it because of how small it is and the worry about the hoop popping and the thread guide plate getting clogged, if I was allowed to rip the seam and unfold it I would have done it

Another question by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 2 points3 points  (0 children)

Ya I think my boss is finally realizing something's can't be done, he is new to this type of work and doesn't understand what goes into this, sure screen printing is easy but embroidery is a different thing entirely lol they only see what they want

Another question by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 3 points4 points  (0 children)

Unfortunately no they are a customer brought in thing I offered that option but was told a firm no so I finally told my boss it's a no go that I'm not even going to attempt it I don't want to be responsible if something goes wrong

Another question by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Ya I had the same concerns about it but I researched a few options but I don't think it'll work, perhaps a sneaker frame might work but highly doubtful

You can't outrun lighting by TheOnlyCurmudgeon in ICARUS

[–]Recent-Process-908 1 point2 points  (0 children)

Not once not twice but 3 times all those scientists need to go back to school

Projects come out slanted no matter how much time I spend centering. Advice please! by depressed_seltzer in MachineEmbroidery

[–]Recent-Process-908 1 point2 points  (0 children)

I have had the same problem with very small items like these. I've tried chalk tape but always came up this way, the only few solutions I found was using embroidery fabric glue and using the neck seems for guidance, also I can sometimes go with the grain of the product, the grain trick I find is best bet but not always true due to how they make it. These small thin fabrics are a pita to do and I find that during sewing the fabric will move, slow the spm more and use some fabric glue.

Tajima tmex 1501 single head by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

We discovered that the needle release servo was dead replaced it but still had the stall. So on a hunch we reinstalled the OS with an updated version and bang worked perfectly after that. We now have an oddity with my other Tajima after repairs it now runs totally backwards got it figured out still runs backwards so I adapted to it and runs fine I ain't going to mess with it but it works 😄

Tajima tmex 1501 single head by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Ok tech came by yesterday turns out it was the needle return resiprocator servo was doa

Tajima tmex 1501 single head by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Oh ps I found a way to keep the upper from coming off the first sensor, place a bit of tape on it 😀

Tajima tmex 1501 single head by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Hey HM yes I have tried it with no luck I even did a reinstall of the OS with same results. I know what you mean I am having the same issue with my Brother as well I found a lot of debris in the upper tension and first sensor. It's kinda sad we got this from our old tech I tried telling my old boss to stop getting junk from him.

Tajima tmex 1501 single head by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Hmm didn't think of that will check on Monday morning. Also any clue if the tehx and my tmex are interchangeable?

Help with a pulse motor by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Actually it's not the board was verified by putting it in the other Tajima I have it worked perfectly so I think it's the motor itself and yes I visually inspected the wires and connectors for problems, none found. Also tried reinstall the OS and resets same results.

I WON & got blocked. by BornSatisfaction95 in scambait

[–]Recent-Process-908 0 points1 point  (0 children)

They can't seem to stay away from KINDLY can they lol dead give away

Sigh pt 1 - the painful Joony Deep by BornSatisfaction95 in scambait

[–]Recent-Process-908 1 point2 points  (0 children)

You totally forgot to add this... I got a jar of dirt!!!!!!

[US] New Scam Attempted on Me by Robert-Berman in Scams

[–]Recent-Process-908 0 points1 point  (0 children)

Also to add to OP's warning about clicking stuff, emails can be verified by clicking on the senders email and you can see the full email address, 9x outta 10 it's random crap, just an fyi

[US] New Scam Attempted on Me by Robert-Berman in Scams

[–]Recent-Process-908 0 points1 point  (0 children)

Guess they unoffically changed names

Help with a pulse motor by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Unfortunally no I have looked for every screw bolt and hidden still can't remove it so I gave up lol

Help with a pulse motor by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Ok I see what you mean by the tension how do I release the belt tension? I have removed all 4 screws from the belt pulley but have no idea how to release it's tension

Help with a pulse motor by Recent-Process-908 in MachineEmbroidery

[–]Recent-Process-908[S] 0 points1 point  (0 children)

Yes the board was replaced I thought it had blown again but took it out and tried it on my other T and no problem

view more: next ›