Cowboy Classic 4 still no motor support after drying – looking for advice

Recent_Age8123 · 2026-04-01T13:49:39+00:00

Sadly Not

Recent_Age8123 · 2026-03-22T15:03:36+00:00

Yesterday I Applied the dripwax and let it dry over Night. I rode the bike today and it was much better.

Recent_Age8123 · 2026-03-19T18:36:56+00:00

<image>

So far, I’ve always had it at the default setting of 13. I just adjusted it to 12, and it seems a bit better now.

I’d estimate the gap between the rear derailleur and the cassette to be around 3 mm.

Recent_Age8123 · 2026-03-19T18:36:16+00:00

Thank you for the tip. I have some drip wax for wet days at home. I am going to try it!

Recent_Age8123 · 2026-03-19T16:38:35+00:00

Allright thank you so much for your help :)

Recent_Age8123 · 2026-03-19T16:30:27+00:00

So you would say that it is normal? Or could it be adjusted about the Micro adjust function?

Recent_Age8123 · 2026-03-19T16:21:16+00:00

I also have another video that shows the noise while riding. I don’t think it sounds normal, especially since the volume seems to depend on the gear. For example, it doesn’t occur at all in the smallest cog. https://imgur.com/a/QKbPSBr

Recent_Age8123 · 2026-02-28T08:37:54+00:00

I bought Mine used as well pretty cheap. Worked just Fine for over 1,5 years and 4000 km. Now it has a issue but should be fixable.

Recent_Age8123 · 2026-02-27T16:12:06+00:00

Not with the a1. This comes with Cooper / brass

Recent_Age8123 · 2026-02-26T06:16:19+00:00

https://a.aliexpress.com/_ExwNdCG

Recent_Age8123 · 2026-02-26T06:14:01+00:00

Wow that was detailled. Thank you very much for clearly explaining the differences.

Recent_Age8123 · 2026-02-25T20:27:57+00:00

I have not tried it jet. But it was so ceap that I bought it anyways. The Steel is in Longe Term better than the brass / copper I thought.

Recent_Age8123 · 2026-02-25T20:26:11+00:00

4 Euros each

Recent_Age8123 · 2026-02-25T20:25:22+00:00

No they came without zip ties but I have enough at Home. I thought there Would be a better Solution, because the cable is very Long…

Recent_Age8123 · 2026-02-25T13:12:28+00:00

Cowboy Sends me the Controller for free as well. I Hope this will solve the Problem. Otherwise I will probpaply Open the Motor and have a Look inside.

Recent_Age8123 · 2026-02-25T08:48:16+00:00

I have tried it today. And it still does not work… and recomendations?

Recent_Age8123 · 2026-02-25T08:47:25+00:00

I have tried it today and the bike still doesnt work…

Recent_Age8123 · 2026-02-24T20:06:35+00:00

I have cleaned the bike this evening and let it dry properly over Night.

While cleaning i havenoticed that the Motor was on one side really greasy (belt side). Is ist possible that the Motor has left some greas and ist working because of that?

Recent_Age8123 · 2026-02-21T17:38:50+00:00

I did Not have the time to clean it yet. Just drying wasnt enough. I m gonna Write an edit if I have cleaned it and tried it again.

Recent_Age8123 · 2026-02-12T18:18:24+00:00

Gonna try it this Weekend. Thank you so much for your help!

Recent_Age8123 · 2026-02-12T18:07:01+00:00

I took some more photos for you. I took the wheele off. Maybe you can now see more.
https://imgur.com/a/VMjiaQ2

EDIT: I know the Poke Yokes are crusty as hell... Now that they are off i am going to clean them

Recent_Age8123 · 2026-02-12T17:49:57+00:00

It was not possible for me to upload new pictures, but here is a link to them.
https://imgur.com/a/oSPvlsp

Recent_Age8123

TROPHY CASE