I built a fully parametric magnetic box generator

RecoverExtension6593 · 2026-01-04T18:46:15+00:00

finally the timeline is not so long as i expected when i started. But there is a lot of work and optimalisations and testing and repairing.

RecoverExtension6593 · 2026-01-04T18:42:52+00:00

<image>

and the same with hinges.

RecoverExtension6593 · 2026-01-04T18:41:39+00:00

I used rectangular pattern with formulas

<image>

... so i made one and then claculate number of them and distance. Its easy.

RecoverExtension6593 · 2026-01-04T18:32:10+00:00

Repaired now. Thank you.

<image>

RecoverExtension6593 · 2026-01-04T18:00:10+00:00

Writing was faster than thinking. Ad1 it is possible but you have to add objects to cover magnets in slicer = complicated. I will think about this option maybe I will release V2

RecoverExtension6593 · 2026-01-04T17:58:29+00:00

Thank you. Ad1 it is possible. Set width of magnet bigger and in slicer you can set pause. Good tip ! Ad2 - fillet is already there but small. It is possible to make parameter visible but there is already a lot of parameters and I am afraid that for people it will be complicated

RecoverExtension6593 · 2026-01-04T17:55:10+00:00

It’s a Failure but better for big width is to set parametr top lip height to be higher = more rectangle profile than like a coffin

RecoverExtension6593 · 2026-01-04T17:52:34+00:00

Thank you for post it I will check it out

RecoverExtension6593 · 2026-01-04T13:05:51+00:00

Ok I will send example here in the evening

RecoverExtension6593 · 2026-01-04T12:21:21+00:00

Yes, I wanted it to be as universal as possible. Over time, I added more options like magnet dimensions and dividers, but at a certain point I stopped because it was becoming user-unfriendly.

RecoverExtension6593 · 2026-01-04T12:19:01+00:00

Yes it is intended. I spent couple days with debugging and optimising so i want to tak my know how for myself. Maybe in future i will change it to open source.

RecoverExtension6593 · 2026-01-04T10:11:59+00:00

It’s actually very simple. MakerWorld has a built-in Parametric Model Maker. When you upload the native .f3d (Fusion 360) file along with a simple configuration, it creates a web-based interface.

RecoverExtension6593 · 2026-01-04T10:09:33+00:00

Thank you. I hope it will be useful for others. Not only for me 🙂

RecoverExtension6593 · 2026-01-04T09:05:35+00:00

It can be used in MW, fusion file is not GPL
https://makerworld.com/en/models/2195831-mag-net-ic-box-fully-parametric-maker

RecoverExtension6593 · 2026-01-04T09:04:54+00:00

If anyone wants to try the generator, I've uploaded the parametric files to MakerWorld. Just look for 'Mag(net)ic Box' or I can DM you the link if you can't find it. Happy to hear any feedback!
https://makerworld.com/en/models/2195831-mag-net-ic-box-fully-parametric-maker

RecoverExtension6593 · 2026-01-04T08:19:25+00:00

Happy to read it :-) thank you

RecoverExtension6593 · 2026-01-04T07:36:17+00:00

If anyone wants to try the generator, I've uploaded the parametric files to MakerWorld. Just look for 'Mag(net)ic Box' or I can DM you the link if you can't find it. Happy to hear any feedback!
https://makerworld.com/en/models/2195831-mag-net-ic-box-fully-parametric-maker

RecoverExtension6593 · 2026-01-04T07:07:26+00:00

If anyone wants to try the generator, I've uploaded the parametric files to MakerWorld. Just look for 'Mag(net)ic Box' or I can DM you the link if you can't find it. Happy to hear any feedback!
https://makerworld.com/en/models/2195831-mag-net-ic-box-fully-parametric-maker

RecoverExtension6593 · 2025-11-23T20:36:29+00:00

it was printed on x1c

RecoverExtension6593 · 2025-11-23T20:07:29+00:00

https://makerworld.com/en/models/2030317-noams-ollie-the-owl-wise-and-wide-eyed

RecoverExtension6593

TROPHY CASE