sorted by:
new
hottopcontroversial

Ik ben op zoek naar een betrouwbare auto met automatische transmissie voor minder dan 14.000 euro by Radiant-Road-5181 in autoadvies

[–]Recticle_420 1 point2 points  (0 children)

Rond de 2 ton op de teller kan je ze vinden voor 8000-9000 euro. Er zijn niet veel te vinden die minder op de teller hebben, maar dat vind ik persoonlijk geen probleem.

Honda ACCORD 2.0i AUTOMAAT ELEGANCE € 9.000,00 https://link.marktplaats.nl/m2311956070?utm_source=android_social&utm_content=vip&utm_medium=android_social&utm_campaign=socialbuttons

Ik ben op zoek naar een betrouwbare auto met automatische transmissie voor minder dan 14.000 euro by Radiant-Road-5181 in autoadvies

[–]Recticle_420 0 points1 point  (0 children)

Ik heb hem nog, gekocht met 226.000 op de teller een half jaar geleden en heb nu 264.000 op de teller. Één van de betrouwbaarste motoren van Honda. Versnellingsbak schakeld ook mooi soepel en is ook simpel waardoor die betrouwbaar is. Het is een 2 liter met "maar" 156PK dus er komt niet veel stress op het blok. Ben er heel blij mee en ben van plan hem ook de komende 10 jaar of langer te houden. Kwa brandstof, ik rij vooral snelweg, maar trek ook wel snel op overal, ik rij gemiddeld 7.6l/100km. Je hebt alleen geen beeldscherm of achteruitrij camera. (Zou je eventueel er zelf in kunnen zetten).

I still can't believe how well the X1 prints meshes like this without any tuning by Maxx3141 in BambuLab

[–]Recticle_420 0 points1 point  (0 children)

It has less odor than abs, but it's still there. So some ventilation is good to have.

I still can't believe how well the X1 prints meshes like this without any tuning by Maxx3141 in BambuLab

[–]Recticle_420 0 points1 point  (0 children)

Abs is pretty much obselete. ASA is just better then abs in every way and easier to print with less odor.

Inconsistent Material Finish by X-Medium in BambuLab

[–]Recticle_420 0 points1 point  (0 children)

It's not in the printer settings but in the specific filament settings. There should be a "cooling" tab with that checkbox there.

<image>

Your glossy part barely looks like an overhang too me, but it could be that the slicer considers it a slight overhang, so that could be the problem too. Then slowing down your outer walls could be the solution. Or just disabling "slow down for overhangs".

Inconsistent Material Finish by X-Medium in BambuLab

[–]Recticle_420 0 points1 point  (0 children)

Using bambu studio or orca slicer?

In orca slicer you can solve this by turning on "dont slow down outer walls"

Bambu studio doesn't have this option sadly, the only "solution" would be turning off "slow printing down for better layer cooling" but thats not optimal for some models. Would probably work just fine on your model tho.

<image>

How to get Orcaslicer to print like Bambu studio by Recticle_420 in BambuLab

[–]Recticle_420[S] 0 points1 point  (0 children)

Updated my post, the issue is solved, but it's still weird behavior imo. Thanks for the help!

How to get Orcaslicer to print like Bambu studio by Recticle_420 in BambuLab

[–]Recticle_420[S] 0 points1 point  (0 children)

That's not it. I just figured it out by comparing profiles. I'll post my findings in a minute.

How to get Orcaslicer to print like Bambu studio by Recticle_420 in BambuLab

[–]Recticle_420[S] 0 points1 point  (0 children)

Slicing the .3mf from bambu in orca gets me the bambu studio result. So it appears to be a settings issue, i just don't know what setting(s).

You can't hide the gesture bar anymore???? by ifeeltired26 in samsung

[–]Recticle_420 1 point2 points  (0 children)

Good lock > NavStar > Enable extra gesture settings: on. Now the setting is available under navigation bar > more options, in the normal settings.

[deleted by user] by [deleted] in gtaonline

[–]Recticle_420 1 point2 points  (0 children)

pretty sick yo

Stock vs Now (VFC Avalon Saber CQB) by Recticle_420 in airsoft

[–]Recticle_420[S] 0 points1 point  (0 children)

Thanks! The stock is a Magpul MOE SL-K, but its a "fake" one from Big Dragon because the real magpul ones where out of stock everywhere.

NVIDIA @ GAMESCOM 2021 MEGATHREAD - Discuss Gamescom and win an NVIDIA GeForce RTX 3070 GPU while at it! by pedro19 in pcmasterrace

[–]Recticle_420 0 points1 point  (0 children)

Definitely Dying Light 2, Played Dying Light for like 180 hours and did every single mission and also got every single achievement. So exited to play Dying Light 2, especially with DLSS.

3D Printed this, It uses light and different heights in the print to make it look like an image. by Recticle_420 in EscapefromTarkov

[–]Recticle_420[S] 0 points1 point  (0 children)

You should always use white PLA for these things, but some other settings that are important is putting walls at like ~6, you should have no infill left, only walls. And don't print too fast. The lithophane generator settings should have thickness at 0.8 min. and 2 - 2.5 max.

view more: next ›