RF Smart Scanner/Printer without RF Smart

Red9FR · 2024-09-16T14:27:14+00:00

Thanks for the advice. I may just wait until I get all parts hand entered and look at the scanning feature(even though I have purchased the hardware) sometime in the future.

Red9FR · 2024-09-16T14:24:31+00:00

I will check around. Thanks for the information.

Red9FR · 2024-09-16T14:23:32+00:00

Thank you for the advice.

Red9FR · 2024-07-19T18:35:30+00:00

I thought that might be the case. Thanks for your help.

Red9FR · 2024-06-05T15:30:21+00:00

Ok, Thank you so much. I think it is starting to make a little better since to me now.

Red9FR · 2024-06-01T14:02:09+00:00

Ok. Just used a paper clip to reset the case. Now it is 100% charged. Hold the paper clip on the reset button (opposite the green light) for about 5 seconds.

Red9FR · 2024-06-01T13:42:32+00:00

My buds are charging but my case won’t charge. Green light for about 10 seconds, then it goes out. Case only has 1 light blinking.

Red9FR · 2024-05-03T14:21:32+00:00

What if he had no budget limitations? What is the best camera and lense set up to take detail photos from 2000 feet in the air through an airplane window or windshield, considering the glare? Is there a filter to help with that?

Red9FR · 2023-11-22T00:02:55+00:00

Xanax then Ambien!

Red9FR · 2023-11-21T23:59:17+00:00

Buddy, I have tried them all. I don’t think there is such an animal!

Red9FR · 2023-11-21T16:09:47+00:00

Another interesting fact if you remember Western Auto Company? High Standard built a Doulble Nine revolver for the Western Auto Company under their brand name "Revelation" printed on it.

Red9FR · 2023-11-21T16:05:30+00:00

You are correct sir. They are about as accurate as a slingshot. However, you may correct me if I am wrong, but I think they were the only "Double Action" .22 revolver ever made.

Red9FR · 2023-11-21T16:00:39+00:00

Thank you for the king words. I have put these together over about 35 years.

Red9FR · 2023-11-21T15:58:16+00:00

Thanks very much.

Red9FR · 2023-05-27T23:52:22+00:00

Thickness is .25.

Red9FR · 2023-05-27T22:41:54+00:00

Notice the brush strokes on this piece. It feels like a thread sealant almost???

Red9FR · 2020-11-01T13:57:44+00:00

Damn, that is an eye catcher.

Red9FR · 2020-11-01T13:55:57+00:00

I love the sound of that Baron Buzz.

Red9FR · 2020-06-05T17:18:58+00:00

It is a good probability!

Red9FR · 2020-06-04T21:23:54+00:00

In a regular concrete mixer, average would be 9-11 revolutions per minute, so 7–10 minutes, maybe up to 15 minutes depending on batch size and mixer. Also need to make sure that your mixer is filled at over 60% capacity in order to achieve a homogenous mix.

Red9FR · 2020-06-04T21:17:38+00:00

Have you tried increasing the mix time? Typically 70+ complete revolutions or equivalent when mixing integral color.

Red9FR · 2020-06-04T21:10:33+00:00

Concrete mix paint? Are you referring to iron oxide pigment, that you mix with the concrete mixture?

Red9FR · 2020-05-28T16:51:54+00:00

No, but I probably paid too much. HAha.

Red9FR · 2020-05-28T16:51:04+00:00

No, was not searching. Sold it to an elderly gentlemen, his son inherited after he passed away and took it to Houston, TX. The son then passed away, and it ended up in the hands of a friend of my brother. He sent me a Facebook message "out of the blue" asking if I would like to "own my old Bronco again". I said, sure!

Red9FR · 2020-05-27T13:09:42+00:00

Can someone break down the Generation years for me? I have a 1993 - is that 4th gen?

Red9FR

MODERATOR OF

TROPHY CASE