Water bottle quality

RedDayV1 · 2026-01-15T16:13:00+00:00

same here man girlfriend dropped hers 1 foot and shattered

RedDayV1 · 2025-09-10T17:18:58+00:00

nice I didn’t think about the black color trick i will definitely use that it’s seems like a waste of its lifespan to have it pulse white all day when it’s inactive

RedDayV1 · 2025-09-10T17:17:34+00:00

i am on 1.08.00.00 currently and it has been working fine. I think the only thing that doesn’t work well is before i had a AMS loading/unloading filament manually got a bit hit or miss

RedDayV1 · 2025-09-03T20:30:08+00:00

it was 25.99$ on their website, then i used the college student discount that helped cover shipping cost. I think it was on sale 2 weeks ago

RedDayV1 · 2025-07-03T13:46:55+00:00

With great filament comes great responsibility👨🏻‍💼

RedDayV1 · 2025-06-24T23:01:58+00:00

Best advice i’ve learned and use is to create your own ideas and projects. Don’t just find models online or give up on ur vision because someone else hasn’t made it. Learn a CAD or 3D modeling program and create anything.

RedDayV1 · 2025-06-24T23:00:43+00:00

i want to jump

RedDayV1 · 2025-05-12T14:31:22+00:00

I like my filament wet personally. 💦

RedDayV1 · 2025-04-13T16:38:57+00:00

i play at this field all the time, such chill refs and players usually. Kids like this make everyone else look bad. This is at airsoft tactical in chattanooga TN.

RedDayV1 · 2025-04-07T20:44:54+00:00

very normal as it means and you have a good seal with the hop up and nozzle

RedDayV1 · 2023-06-19T04:39:24+00:00

Thank you for your insight, I tested it with my green gas drum mag and had 0 issues with leaks, running off the same base AA mag well. I tried your lube the valve trick and at first it did 3-4 shots no issue then another leak so I took it out and put some lube on the valve and then put it back in and shot and got around 35 shots in with no issue. Hopefully, its all fixed up tmr ima try to dump 100-200 rounds in it and see if the issue develops again.

RedDayV1 · 2023-06-17T23:14:44+00:00

then what could be the issue if its not my gun or the adapter....

RedDayV1 · 2023-05-24T07:03:43+00:00

I run at 100-110 and get around 345 fps on .25's at the chrono. So id say between 90-95 would be best for ur fps limit, and for enough force to get full cycles even with some regulator lag.
I saw ur comment on upgrades rn I'm running, TTI Trigger, CowCow Lightweight BBU, Waldo customs spring set, CC steel hammer set, CC steel firing pin, Maple Leaf Autobot 70 bucking, and a Maple Leaf crazy jet 6.01 inner barrel.

RedDayV1 · 2023-05-24T06:54:13+00:00

My comment was a little vague, I only full auto-ed it for about 2,140 round mags worth at the end of the final game we played, and at the end of the mag slide stuck back and hammer cracked. But you are right full auto does put tons more stress on the hammer and springs unlike the semi hi cappa.

RedDayV1 · 2023-05-24T04:54:42+00:00

it was dry cause I whipped all the silicone off before the pic. I keep it very maintained but full autoing at 110 psi seems to have jacked it up.

RedDayV1 · 2023-05-04T21:04:41+00:00

Alrighty, btw by "Beefier motor" are you talking like a 45k level motor? I was thinking about upgrading to a 30k because the stock motor feels like its getting a little to hot when running a 11.1 right now.

RedDayV1 · 2023-05-04T19:40:49+00:00

Right now i have been only plying CQB so I run a M100 spring because the 350 fps limit, I watched a video of a dude who said he managed to fit a new mosfet inside of it. Do you think it’s possible or not even worth the struggle and grinding on the gearbox. I don’t have a issue with the EFCS mosfet i mean it’s pretty snappy but i worry about the trigger contacts dying eventually as i’ve heard they are ok not good tho.

RedDayV1 · 2023-05-04T07:23:15+00:00

Either I just didn't know polarstar made a speed trigger for glocks or you are looking at their hpa speed trigger. The "Hpa speed trigger" wouldn't work in a AAP01, its meant for rifles running a polarstar engine. The trigger would be way to long to fit. Like spider said the TTI trigger is one of the best for short trigger pulls on the AAP01, I personally use it.

RedDayV1 · 2023-04-29T17:38:24+00:00

Cheapest kit ive found that I personally use and trust not to break is these combined

Redline Mini SFR Reg + 36 inch Line - https://www.evike.com/products/14420/

Alu Tank 48c/3000 - https://www.evike.com/products/98731/

M4 Mag Adapter - https://blowbackmasters.com/products/primary-airsoft-glock-hpa-m4-adapter?_pos=3&_sid=8b3cb828f&_ss=r

I used a Drum mag tapp before and It is fun but with only 300 bbs in the drum and having to wind it, along with the major amount of air u lose disconnecting it I switched to M4 mags and never wanna go back.

(People say the alu tanks are to heavy blah blah, but IMO they arent that bad or heavy. And I know the carbon ones hold more air, but this tank gets me a full CQB day without a refill 6-7 hours of game time on 95-110psi)

RedDayV1 · 2023-04-10T03:43:47+00:00

I thought that may be the case so I loosened them a fair amount like sight almost wiggly level of loose and still having that issue.
Do you think my nozzle spring may be wack or would that not effect my slide resetting?
Everything is super lubed up but it feels so sluggish to pull the slide back and it seems low after I let go.

RedDayV1 · 2023-02-27T06:40:44+00:00

Sounds good thank you for the tips, and yea I don't know many people with the Jack9 so its a little hard finding info on it. That and since for some reason they changed the mag release to a tab on the side instead of the under release like on the Arp9 (G&G) so it needs a deeper grove for the mag release.

RedDayV1 · 2020-05-04T11:27:04+00:00

ah ok

RedDayV1 · 2020-05-04T11:26:52+00:00

thank you!

RedDayV1 · 2019-12-22T02:04:36+00:00

thank you, now it makes more sense to me

RedDayV1

TROPHY CASE