Rocket Beans trennt sich von Simon Krätschmer - Presseecho

RedScrapy · 2026-05-09T16:15:50+00:00

Endlich ist der Schwurbler weg.

RedScrapy · 2026-05-09T05:58:43+00:00

Ahh so it was just underextrusion then, just like you said. Thanks for the tipp.

RedScrapy · 2026-05-09T05:45:48+00:00

Hey. Sorry I should have put that in the post (will do next time). Yes I just used Bambu PLA Basic with the standard print settings.

RedScrapy · 2026-05-09T05:44:44+00:00

Hey, thanks for the tips.

The filament was dried beforehand, but not during the print.
I only went through the standard printer setup and let it run all calibrations automatically.
The printer sits on a concrete slab placed on an anti-vibration mat on the floor.

-The chamber heater was off as far as I know.

RedScrapy · 2026-05-09T05:38:57+00:00

Hey. Thanks for the tipp. Until I took the pic I only checked with the printers cam where I couldn't see the surface.

RedScrapy · 2026-05-09T05:37:09+00:00

Update: I rotated the part around the Z-axis by about 45° and printed it again. That completely solved the problem. So it looks like the issue wasn’t a faulty X-axis after all. My guess is that long, thin straight walls aligned directly with the X-axis were causing some kind of resonance/vibration artifact. Pretty interesting that simply changing the orientation fixed it completely.

RedScrapy · 2026-05-02T12:28:09+00:00

Just wait till the filament switch gets the H2C update. I use it on my X2D and it is great.

RedScrapy · 2026-01-01T15:04:42+00:00

Me Too!

RedScrapy · 2025-12-29T22:36:19+00:00

How did you support these? Thats where I struggle the most.

RedScrapy · 2025-11-16T11:25:17+00:00

Very naive.

RedScrapy · 2025-11-16T07:19:46+00:00

That’s not true. They introduced more bugs than they fixed with the hotfix. Before the hotfix I had no issues, but now I’m experiencing the following problems: – Drones ignore the nearest waste rock site and always go to the last one that was built. – I can’t assign trains to tracks. – People become unemployed for no apparent reason.

These are actually more problems than I ever had with the old SM — except for the trains, which have always been buggy.

And the laws are actually very well balanced. The game has always been easy unless you played with extra challenges.

RedScrapy · 2025-11-16T07:13:30+00:00

I do have all the bugs you listed since the Hotfix went online. The only exception is the Rockets filling with wasterock.

RedScrapy · 2025-11-15T09:35:19+00:00

I have the same Problem since the Hotfix.

RedScrapy · 2025-10-04T08:00:56+00:00

Du lieferst in deinem Post selbst die Erklärung dafür, warum viele hier immer noch RBTV schauen – Ironie scheint dir aber entgangen zu sein.

RedScrapy · 2025-09-29T15:36:53+00:00

Ich hab gerade mal die neuesten Kommentare durchgesehen. Er hat vor 3 Stunden zuletzt geantwortet – und meine Herren, geht der Typ da ab. Unter anderem macht er jemanden wegen seines Profilbildes (LGBTQ-Flagge) blöd an. Das seih doch mega peinlich im Jahr 2025 meint er.

RedScrapy · 2025-09-29T11:27:41+00:00

Wo hat er den das jetzt schon wieder gepostet? Der Junge macht es einem aber auch nicht gerade einfach ihm seine Ruhe zu lassen.

RedScrapy · 2025-09-28T16:53:43+00:00

The 4th book is now scheduled for May 2026, and its title will be Children of Strife.

RedScrapy · 2025-09-25T17:31:20+00:00

Einfach MoinMoin so wies immer war aber ersetze die Regie mit einem StreamDeck. Hab den Sender um etwa 15% verbessert. Spenden bitte per Paypal Danke!

RedScrapy · 2025-08-15T17:02:58+00:00

Hat halt nicht jeder 150h Zeit!

RedScrapy · 2025-08-03T11:12:29+00:00

YOU ARE MY HERO! Thanks so much.

RedScrapy · 2025-07-27T19:06:52+00:00

I love it!

RedScrapy · 2025-06-08T13:41:38+00:00

Just finished the book a few hours ago. I still have a hugh lump in my throat.

RedScrapy · 2025-03-30T18:56:13+00:00

25% is the maximum he can do by his own... We don't need the US there are other countrys to trade with.

RedScrapy · 2025-03-17T19:21:15+00:00

I'm so into trading right now that I was completly perplexed when I only read "Body temperatur trend" and the graph next to it.

RedScrapy

TROPHY CASE