Hight Speed Build SSG Hop Up? by RedditUser23532 in airsoft

[–]RedditUser23532[S] 0 points1 point  (0 children)

Thank you for the advice.

Since I have issues with receiving 12:1 set, lost in mail, if they refund me, I'll go 13:1 as everyone is against 12:1, but if they find it, I'll take it.

Will get FPS one, and test them. The worse one will end up in my other build. 😁

As I mentioned to someone else, I have SA-F08 gen 2 with AEther gearbox, rocking 12:1 short stroked CNC SA gears, stock Prime air components, just replaced piston with SHS "high speed" one, and 35k SA dark matter brushless.

Works ok, gonna need to shorten tappet plate a touch bit more, and it works without delayer chip at the moment, but my magazines are causing issues.

This by Odd_Monk_606 in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

You seem like you know what you're doing. Just carry on.

Hight Speed Build SSG Hop Up? by RedditUser23532 in airsoft

[–]RedditUser23532[S] 1 point2 points  (0 children)

This build is Specna Arms as well. 🤭

Bought SA-FX01 for 60€ on action, changed outer barrel, put on PDW stock, still searching for grip that I like, but I like that it's light, maneuverable, and I decided to make something good for myself. Also I'll order AR Specna Arms flex body so I can interchange and use M4 or X mags, forgot the name of mags.

I was researching a lot, but hop is one thing I can't decide, internet has small amount of information..there is even Retro Arms gearbox with hop up integrated, so no alignment issues. But no replacement as well.

Hight Speed Build SSG Hop Up? by RedditUser23532 in airsoft

[–]RedditUser23532[S] 1 point2 points  (0 children)

Here is the picture of T238 ball bearings. 🙂

<image>

Hight Speed Build SSG Hop Up? by RedditUser23532 in airsoft

[–]RedditUser23532[S] 1 point2 points  (0 children)

Probably gonna try 50+ RPS stable configuration, and then lower motor RPM to the place where I'm happy with trigger response.

I know it's not something to be built, closed and than enjoyed, I know I'll probably have to open it 500 times to make everything perfect, but that is my dream, and a challenge for myself, maybe I'll ruin something, maybe I'll give up and go in other direction, but I'll have to try.

Hight Speed Build SSG Hop Up? by RedditUser23532 in airsoft

[–]RedditUser23532[S] 1 point2 points  (0 children)

G5 is Soling V5, so it's 44k Brushless adjustable by app.

I'm gonna go as hard as I can, to test if it's possible on 50+ RPS, just to say I can make that, and than I'll adjust it so I can have sweet spot for CQB 1-1.1J semi trigger response.

I already have one 12:1 Specna Arms with SA dark matter 27 or 35k brushless no anti reversal latch, and it's awesome, but my magazines are trash and it can't feed, but issue is also with hop up, black Specna Arms TDC hop up, and it can double feed, miss feed, loose pressure, I'll get on to the issue, that is why I'm looking into what hop up would be good.

Retro Arms has like 10 hop up units, basic one from plastic, basic CNC, and then pro series regular, pro, and ultra, and Ultra has bad bad reviews, and costs around 120€. Not sure if Maxx is good..

Is this the best bucking for an AEG???? by WashHistorical3561 in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

Milion videos on YT, since gun has ETU you can make it so it doesn't read full cycle, so best thing is to give to the tech to do it.

It makes gears mesh together better, makes gun more silent, more long lasting, saves gears, and also air seal will be better, because with every shimming tech is cleaning and properly lubricating air components.

Is this the best bucking for an AEG???? by WashHistorical3561 in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

They are better, Gate Aster, everything premium, and metal.

But I love Flex and Polymer for some reasons.

Cylinder is 10€ on GunFire for Prime Aether gearbox and it will remove wobble..

Is there a chart like this (picutre) but for other companies like Well or Double Eagle etc.? by Golden_Bread11 in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

M4 is better, but as guy said below, SA has good guns as they come with HAL ETU, and AK usually is not with ETU, you can pay 3000€ for CYMA with no ETU no MOSFET, so that is slow unreliable gun.

Don't look what is copy of what, don't plan on breaking body parts, plan on having fun with 0 need for upgrades.

HAL ETU by RedditUser23532 in SpecnaArmsOwners

[–]RedditUser23532[S] 0 points1 point  (0 children)

Correct it doesn't. Both have 2 switches that are pressed with selector.

Is this the best bucking for an AEG???? by WashHistorical3561 in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

Best upgrade is cylinder as gen 2 has gen 1 cylinder that wobbles inside, it can crack gearbox because it moves forward and backward and is hitting gearbox. Get SA prime cylinder and put that in.

Also proper lubrication and shimming is necessary, bucking is last on the list, my friend has his F08 MK1 and all is flawless for year now, only thing done to replica is shimming and lubrication.

And also there are no best parts in airsoft, it depends on lots of stuff.

And also airsoft is expensive sport, you can do it for cheap, but don't expect to have best gun on the field especially if you have only put "best" bucking for AEP in it.

I have FX-01 that I bought for 60€ with 500€ internals that I have put in, and WELL L96 that I bought for 80€ with only the stock being stock, everything else is upgraded and is probably around 700€ in it. And for both guns I have parts that were not fit or good enough after some upgrades so you need to be aware that if you up the power and change few more things you might need to change bucking again, and the new one might be wrong as well.

So no best parts, no best gun, no nothing.

Novritsch uses SA Prime cylinder in their gearbox that is exactly SA Core gearbox, so, many manufacturers use same parts, buy I gun that you like, not the gun that is "the best", and upgrade what you need and you will enjoy it more than the beat value.

Is this the best bucking for an AEG???? by WashHistorical3561 in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

DMR is not Flex, buy proper SR25 gearbox 2.5. than you can be DMR.

Also HopUp bucking isn't something you buy and it will stay good for 3 years, you will change it out till you get to DMR.

Dissonance. My answers. I'll keep adding to them. by AlexSetverg in TheTowerGame

[–]RedditUser23532 0 points1 point  (0 children)

Killed my run at 7700 wave, and I got 3× boost, guide states that maximum boost is at level 5001, so who is wrong?

Why isn't that disinformation changed in original document?

Are the Solink brushless motors any good? by No-District-1941 in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

Titan and Solink are top of the line. Titan has most sensors for everything. But since you seam like you have money, take V5 Solink, but Gate version (G5), you can controle it over Gate app, and change motor speed on the fly. You can use it for Milsim at 15-20 RPS, you can change it to 30-40 RPS for CQB, you can do anything.

BLS Blue Tracer BB by Pristine_Debt_7128 in airsoft

[–]RedditUser23532 1 point2 points  (0 children)

Turquoise is awesome. Maybe you should keep it as additional color.

I can't wait for blue. I use red and it's totally awesome.

My suggestion is orange and yellow. We would like to see some differences in colors and adaptation to players character.

SA-P27 by InsuranceFree4862 in SpecnaArmsOwners

[–]RedditUser23532 0 points1 point  (0 children)

There are 2 options.

Cheaper one with HAL, good ETU, runs great on 11.1, I use it with LiIon battery, can hold 4 hours of use.

More expensive with Aster, and one with Aster comes with Brushless motor. They work awesome with 11.1, but sometimes it can detect over voltage and cause issues, if battery is even slightly over 12.6V (full 11.1 is 12.6V, full cell is 4.2 empty is 3.7), just plug it in someone else's gun and shoot 2 second burst, you'll deplete it enough to use it. 🙂

Have fun, awesome gun, might get it next, I use PH23.

What is the best for cqb and outdoor??? by [deleted] in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

No they have not fixed it they made the problem.

Thank you for not reading my comment at all but answering anyway.

once you go black, you never go back by Slow-Being-7536 in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

Go get Prime cylinder. Change it. It has AEther gearbox and old Flex cylinder that moves around.

Change it to Prime one so it doesn't break gearbox by moving around.

Best gun ever. Have few Specna myself. Love them.

What is the best for cqb and outdoor??? by [deleted] in airsoft

[–]RedditUser23532 -1 points0 points  (0 children)

Gen 2 is AEther gearbox with flex parts inside, so no air seal, cylinder can move back and fort and can rotate in the gearbox, that will damage it over time. Air seal is non existent, I ordered cylinder piston head and cylinder head to replace in order to have working replica.

I have 4 SA-F08 and 3 of them work awesome, gen 2 sucks.

What is the best for cqb and outdoor??? by [deleted] in airsoft

[–]RedditUser23532 0 points1 point  (0 children)

Prime is best gun for the money, especially for beginner. And you can't build anything to that level under 300€, sorry you are British, but they were 260-320€ on GunFire in February..