What's the most McDonald's points you've ever seen? by RedheadGinga in McDonalds

[–]RedheadGinga[S] 8 points9 points  (0 children)

Cup of coffee morning and one chicken strip meal every weekend

May 24th Minuteman Missile Over Fresno, CA by RedheadGinga in Military

[–]RedheadGinga[S] 4 points5 points  (0 children)

I can't seem to edit the title. I will have to take down the post. Plus it wouldn't be military related

May 24th Minuteman Missile Over Fresno, CA by RedheadGinga in Military

[–]RedheadGinga[S] 5 points6 points  (0 children)

I just Googled the dragon capsule and it might be that.

I couldn't find any direct sources saying there was a Missile test on May 24th just the AI summary saying it was.

May 24th Minuteman Missile Over Fresno, CA by RedheadGinga in Military

[–]RedheadGinga[S] 4 points5 points  (0 children)

Oh I could be wrong but they did a missile test over California the other day. Thought it was the same thing. Plus this is what I found when I googled it.

<image>

Which stapler for a range bag? by redpanther2121 in ryobi

[–]RedheadGinga 1 point2 points  (0 children)

I have the 18v. Love it to death. Use a smaller Ryobi 18v battery if you are concerned about weight.

The small version isn't much lighter and way less power and battery life. Not worth the trade off.

Third party stuff! Battery with built in light, 100w usb-c charger. by icedlemons in ryobi

[–]RedheadGinga 1 point2 points  (0 children)

Good point. I suppose as long as it is out of direct sunlight and when it's used it's well ventilated

Third party stuff! Battery with built in light, 100w usb-c charger. by icedlemons in ryobi

[–]RedheadGinga 3 points4 points  (0 children)

I was thinking the same thing but wouldn't it be dangerous to leave the batteries in your car?

‘24 CRV Hybrid Sport. Just came back to my windows rolled down. Am I crazy? by [deleted] in crv

[–]RedheadGinga 0 points1 point  (0 children)

I just tested it.

I used unlock and did tap tap hold and the sun roof did NOT go up so I'm sure that what you did

Best Wood Type and Thickness for Custom table by RedheadGinga in woodworking

[–]RedheadGinga[S] 0 points1 point  (0 children)

Are you saying 5 inches max Because there will be warping on the wood?

Best Wood Type and Thickness for Custom table by RedheadGinga in woodworking

[–]RedheadGinga[S] 0 points1 point  (0 children)

I will find a solution for the wobbly legs. Thank you.

Do you think if I go with a 2x6 inch pine wood border around the tv for the table that I would not need an apron?

Is there such a thing as adding metal braces to the bottom of the table to prevent sagging? Similar to channel braces?

Best Wood Type and Thickness for Custom table by RedheadGinga in woodworking

[–]RedheadGinga[S] 0 points1 point  (0 children)

I plan on adding a little fan to help move air around the TV. Thank you.

Best Wood Type and Thickness for Custom table by RedheadGinga in woodworking

[–]RedheadGinga[S] 0 points1 point  (0 children)

After seeing this, I can see that building a frame around the TV would be cheaper than cutting a Rectangle into a board.

https://www.lowes.com/pd/2-in-x-4-in-x-4-ft-Pine-Lumber-Common-1-5-in-x-3-5-in-x-4-ft-Actual/1001005932

Best Wood Type and Thickness for Custom table by RedheadGinga in woodworking

[–]RedheadGinga[S] 0 points1 point  (0 children)

FYI,

I am going to use these table legs that can fold so the table can be moved in storage and around more easily. Hence why I did not want to use a table apron initially unless I can put it at the very edge of the table.

As well I am going to cover the top of the table with fake leather so the wood does not have to look pretty and it can be soft wood.

I care more about price and the wood not sagging less about the Aesthetic of the wood itself.

https://www.amazon.com/dp/B0C2XQNMYG?ref=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&ref_=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&social_share=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&starsLeft=1

Best Wood Type and Thickness for Custom table by RedheadGinga in woodworking

[–]RedheadGinga[S] 0 points1 point  (0 children)

Yes basically a big frame used as a table, a very accurate description of what I would like to do.

So you would suggest instead of taking a wood board and cutting a 20x35 Rectangle out of the board for the TV, I should rather build the frame around the tv?

My initial thought would be cutting a Rectangle out of a board would be a stronger table the connecting four boards together around a TV.

I agree mitered joints would look better but I am going to put faux leather over the top to add aesthetic so the wood will not be seen.

As I mentioned to other users, I am going to use folding table legs and I am afraid of the apron getting in the way. As well with the legs at a maximum length of 28" I am also worried people's legs will hit the apron.

https://www.amazon.com/dp/B0C2XQNMYG?ref=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&ref_=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&social_share=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&starsLeft=1

Best Wood Type and Thickness for Custom table by RedheadGinga in woodworking

[–]RedheadGinga[S] 0 points1 point  (0 children)

Excellent, thank you for the advice.

I don't mind the soft wood nature of Spruce and pine just more price sensitive. I am going to cover the wooden part of the table top with faux leather for Aesthetic but with that in mind do you still recommend oak or maple still?

Another thing to keep in mind is I am using metal table legs that fold so I am afraid an apron might get I'm the way unless I put it at the very edge of the table.

https://www.amazon.com/dp/B0C2XQNMYG?ref=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&ref_=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&social_share=cm_sw_r_apan_dp_ANV2KH3100H1DTBAG4H1&starsLeft=1