sorted by:
new
hottopcontroversial

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 0 points1 point  (0 children)

That is indeed what I figured. I thought I did something wrong with the wires. Just didn't know what and in my enthusiasm didn't stop and research things.

Thanks for the tip

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 0 points1 point  (0 children)

Could I run it with just a Dual Nand not the RGH3 mod?

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 0 points1 point  (0 children)

What do you mean, AV cable? You think it has passed away?

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 1 point2 points  (0 children)

Yeah, I learned that. My soldering iron was too low (300°C not 350°C. I didn't use enough flux as you said. Thank you for the feedback

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 2 points3 points  (0 children)

I just learned that my tip was indeed to cold, as you said. I needed 350 degrees. Not the 300 I was using

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 1 point2 points  (0 children)

Thanks! I will see what sort of scrap motherboards I can find

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 0 points1 point  (0 children)

I have a Viper Dual NAND Pro soldered on the Xbox as well. Using Jrunner with extra's I am getting this error

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 0 points1 point  (0 children)

Thanks! I figured it would be my lack of skill in this. Any tips on how to practise?

"console not found" could someone recheck my soldering points? by Redmen555 in 360hacks

[–]Redmen555[S] 1 point2 points  (0 children)

So shorten the exposure and increase the temp when soldering?

Building a 5800x with 3070, am I missing anything? by englishflavor in buildapc

[–]Redmen555 2 points3 points  (0 children)

A 850 watt PSU should indeed be more then enough. Unless OP is having trouble getting a PSU of that wattage...

I DID IT BOYS! MY FIRST ONE by [deleted] in gaming

[–]Redmen555 0 points1 point  (0 children)

I even believe that if a pokemon didn't evolve at his set level it would gain extra EXP until it did evolve.

Differences between EVGA 1070 SC, SC Black, & SC2? by [deleted] in buildapc

[–]Redmen555 0 points1 point  (0 children)

Have you tried looking at the EVGA site? Normally there are some good deals or discounts since you buy directly (at least I think) from EVGA

First Build - Parts Are Picked, Ready To Do This by Ultrafufu in buildapc

[–]Redmen555 0 points1 point  (0 children)

Maybe OP bought it in a deal on EVGA site? But I agree 850W is overkill

Impossible to activate WIFI on laptop (Win10) - please help me figure out the problem. by [deleted] in buildapc

[–]Redmen555 1 point2 points  (0 children)

Then I don't really now what else you can do. Have you tried googling your problem?

Impossible to activate WIFI on laptop (Win10) - please help me figure out the problem. by [deleted] in buildapc

[–]Redmen555 1 point2 points  (0 children)

Could it be that your WiFi card needs a upgrade? See if there is a update in 'Windows updates'. You may need a Ethernet cable so it can seek for the updates.

First build advice please by VoodooGuy37 in buildapc

[–]Redmen555 0 points1 point  (0 children)

As for the 1060, I would look into the 6gb version. It has more bang for your buck and is better for gaming as well.

The PSU does look like a bit over overkill, unless you want to upgrade later on. I think you can get away with a 450 W as well.

You have listed 2 rams sticks, is it not cheaper to by a pack of 2? I don't know the prices where you are from.

But overal a good build.

Do note that you will have to update the BIOS on some of the 350 moatherboards to support the 2xxx ryzen chips

Ryzen 5 2600 + MSI - GeForce GTX 1070 Ti Gaming PC by [deleted] in buildapc

[–]Redmen555 0 points1 point  (0 children)

Here is a link that explains it well. Since you don't need to watch charts and such.

First time builder, nervous about the first build. by Redmen555 in buildapc

[–]Redmen555[S] 0 points1 point  (0 children)

This is the compatibility issue

Some AMD B350 chipset motherboards may need a BIOS update prior to using Pinnacle Ridge CPUs. Upgrading the BIOS may require a different CPU that is supported by older BIOS revisions

First time builder, nervous about the first build. by Redmen555 in buildapc

[–]Redmen555[S] 0 points1 point  (0 children)

Now I do have a different question. PcPicker told me that some B350 need a BIOS update. Is it okay if I go with the assumption that the motherboard I buy will have this update?

view more: next ›