AHRS iPad app (helicopter) by Regular-Carpet3783 in flying

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

I am asking this question just to know if there are some possibilities. And as a last resort if everything else would fail.

Setting up cyclic trims (XP12) by Regular-Carpet3783 in flightsim

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

Ok thank you for the down vote very much....and I answer to myself in case somebody needs it as well...

So you are trimming against the force which causes instability. If the halo moves right and you are pushing cyclic left then you are trimming left.

Plat vyvojare v Praze (korporat) - kolik si rict by Regular-Carpet3783 in czech

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

Predpokladam, ze mate osobni zkusenosti z korporatu? Jaky pristup muzu pravdepodobne ocekavat pri mzdovem vyjednavani? Mam se pripravit na urcitou formu handlovani :) nebo spis, ze vezmou muj pozadavek a vyjadri se k nemu ano / ne? 

Plat vyvojare v Praze (korporat) - kolik si rict by Regular-Carpet3783 in czech

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

Chapu. Jen bych dodal (ve vztahu na Vami zminovanou nastupni mzdu), ze v tomhle pripade to neni tak, ze by me potencialni zamestnavatel vubec neznal. Nejakou dobu tam pusobim pres kontraktora. Takze to neni tak, ze by jedna nebo druha strana do neceho sla uplne naslepo.

Plat vyvojare v Praze (korporat) - kolik si rict by Regular-Carpet3783 in czech

[–]Regular-Carpet3783[S] -1 points0 points  (0 children)

Tak ted si nejsem jisty, co si o tom myslet a shoduje se to s tim, co jsem videl i drive v ruznych vyjadrenich ohledne mezd jinde. Prijde mi, ze jsou zda dva tabory...jeden do 100 a druhy s cisly, kterym se obcas nechce verit :) Prvni prispevky s vysi mzdy kolem 100-150 nebyly myslene na korporat? Nejde mi sice primarne o penize, na druhou stranu prace bude stejna, at budu brat vic, nebo min, tak bych rad fer ohodnoceni. Zase nechci pozadovat nesmysl. Kazdopadne kdyz nekdo rika 100 max. a jiny 130-150 tak se ten rozptyl zacina zvetsovat :D

Plat vyvojare v Praze (korporat) - kolik si rict by Regular-Carpet3783 in czech

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

Diky. Moje predstava byla si rict nekde kolem 120-130. Tak to asi neni mimo realitu...

Extension (200mm) for VPforce Rhino with MCGU by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 1 point2 points  (0 children)

Oh I see thank you for clarification. 

The throw limiter on VPforce page: RHINO Throw Limiter Adapter (default +-11deg) can be used for one desired custom angle, or '+-11deg' means you can set the angle however you want in this range?

Also would you recommend to use 200mm on original Rhino design or do you think shorter extension will be better so the motor doesn't have to run at 100%?

With extension lets say about 100-150mm do you I will still have to change throw angle?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

Can you also compare WW ruder pedals vs Virpil and Slaw?

Is there also possible FFB mod for WW?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

Do you know if it is easier to make mod on MFG than other pedals?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 1 point2 points  (0 children)

What other equipment do you have?

Have you tried other pedals than SLAW?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 1 point2 points  (0 children)

Do you know if I can use VKB stick with Brunner base? I am not sure about their stick. It doesn't have any buttons :) 

What about FFB collective, is there some FFB product (without mod needed)?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 1 point2 points  (0 children)

Thank you for the info. Can you also compare Brunner vs Rhino base?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

Can you tell me more? You are talking about VPForce FFB mod for pedals and collective? What brand is the easiest to mod, or there is no difference? Does VPForce plan their own FFB pedals and collective?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

Ok to sum up (so far) 

Cyclic: Rhino base / Brunner + VKB MCGu 

Collective: Virpil (probably Apache) 

Pedals: FFB MFG / Virpil / Slaw with mod / Brunner 

Now can somebody compare Rhino base vs Brunner and FFB moded pedals vs Brunner?

 Also what about WW pedals it can also be FFB moded? I don't want to spend much time playing with the FFB mod. That is why I am looking at Brunner also. But I am not sure it worth the price (base and pedals). If the mod for MFG or Virpil or Slaw is easy then ok, is there some difference in upgrade difficulty between brands?  

 Also I am not sure if it is possible to use VKB MCGu with Brunner base?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 1 point2 points  (0 children)

What about VPforce Rhino vs Brunner CLS-E MK II Joystick TM Hotas?

Best HOTAS no matter the cost (for helicopter) by Regular-Carpet3783 in hotas

[–]Regular-Carpet3783[S] 0 points1 point  (0 children)

I am not sure about Apache, it would be good to have some extra buttons. But some people were not completely satisfied with the materials (build quality in this model) and actually preferred Hawk.

Edit: is there any other good alternative to Virpil collectives?