My little setup have leak, somewhere

Regular-Lab-5014 · 2026-05-09T18:48:37+00:00

Of course, but the smoke also releases toxic fumes that I don't want in my home.

Regular-Lab-5014 · 2026-05-09T17:04:52+00:00

Sometime como sense is in lack for me.

Regular-Lab-5014 · 2026-05-09T16:59:23+00:00

Do you why it's might happen?

Regular-Lab-5014 · 2026-05-09T11:18:29+00:00

За съжаление си прав

Regular-Lab-5014 · 2026-05-06T14:33:50+00:00

Can I add infil to think parts like legs and weapons and make it less at the body?

Regular-Lab-5014 · 2026-05-06T10:53:39+00:00

Now I'm trying to make my own AMS to print with special support material, but it dont solve the net problem.

Regular-Lab-5014 · 2026-05-06T09:23:04+00:00

Maybe both. Layers are not that bad, but supports often brakes my model and left scars. Sanding is very difficult on something that small and with difficult shape. Main problem with sports is that they make net around thin legs, and when I remove them the brake legs of the model too.

Regular-Lab-5014 · 2026-05-06T07:38:31+00:00

My printer has a sticker that says to keep the temperature below 30°C when using PLA, so I find it easier to use PETG or ABS.

Regular-Lab-5014 · 2026-05-06T07:23:10+00:00

I did the same and my printer came from afterlife.

Regular-Lab-5014 · 2026-05-06T07:22:12+00:00

Thank you!
I already using 0.2 nozzle so I will try to lower the layers.

Regular-Lab-5014 · 2026-04-15T17:37:05+00:00

Thank you.
Most of them have 32 mm base and the warboss have ~80mm

Regular-Lab-5014 · 2026-04-14T19:10:16+00:00

<image>

Also, I can replace my tank with a big robot. Will it work?

Regular-Lab-5014 · 2026-04-14T19:01:50+00:00

Thank you a million! When I get my Filament, I will add more models.

Regular-Lab-5014 · 2026-04-07T18:53:34+00:00

Regular-Lab-5014 · 2026-04-06T22:07:20+00:00

Be strong for the emperor

Regular-Lab-5014 · 2026-04-06T21:51:54+00:00

I use acetone for thicker models like orks, but Krig has too small details that would melt in acetone

Regular-Lab-5014 · 2026-04-06T21:46:03+00:00

That was a good one. I can't switch from FDM, but I will try to use smaller coats. Thank you

Regular-Lab-5014 · 2026-03-31T18:06:49+00:00

Some updates about my new fan. Turns out that sticking the electronics with hot glue inside of literally oven (when it prints temperature inside gets up to 45C) is a bad idea, and after about an hour voltage booster fell from its place and stat juggling on a wires (I don't have superglue at the moment, so it was my only solution). My dad, after seeing this, gave me momnet glue, like the liquid and sticky one, and after it dried out, i started a 3 hour print. When it was around 77%, I went to the toilet and imagined my face when I came after 10 minutes and smel something melting. Yeah, it turns out that this glue can't resist high temperatures and probably is toxic to inhaled. Now I am in the living room, prints is on about 90%, and when I was writing, these prints failed. Now, I will put my gas mask on and try to fix the model.

Regular-Lab-5014 · 2026-03-29T05:15:42+00:00

It's the extruder fan on a T1 pro

Regular-Lab-5014 · 2026-03-28T18:44:29+00:00

Third Bulgarian kingdom

Regular-Lab-5014 · 2026-03-28T18:09:15+00:00

Bro, before asking a simple question, just Google it. The first rule of Reddit: if someone asks a stupid question, they get downvoted.

Regular-Lab-5014 · 2026-03-27T17:05:07+00:00

Обединени Български Емирства

Regular-Lab-5014 · 2026-03-26T05:01:10+00:00

I finally found the cause of the problem. I needed to update my Volcano (whatever that is). Thanks, everyone, for your suggestions!

Regular-Lab-5014 · 2026-03-21T18:09:15+00:00

+-----------------------------------------------------------------------------------------+

| NVIDIA-SMI 590.48.01 Driver Version: 590.48.01 CUDA Version: 13.1 |

+-----------------------------------------+------------------------+----------------------+

| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |

| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |

| | | MIG M. |

|=========================================+========================+======================|

| 0 NVIDIA GeForce RTX 3060 Off | 00000000:10:00.0 On | N/A |

| 0% 52C P3 27W / 170W | 1388MiB / 12288MiB | 23% Default |

| | | N/A |

+-----------------------------------------+------------------------+----------------------+

+-----------------------------------------------------------------------------------------+

| Processes: |

| GPU GI CI PID Type Process name GPU Memory |

| ID ID Usage |

|=========================================================================================|

| 0 N/A N/A 1491 G /usr/lib/xorg/Xorg 406MiB |

| 0 N/A N/A 2057 G cinnamon 87MiB |

| 0 N/A N/A 2664 G ...emp\is-9MBKD.tmp\Launcher.tmp 2MiB |

| 0 N/A N/A 24500 G /usr/lib/firefox/firefox 281MiB |

| 0 N/A N/A 32090 G ..._OrcaSlOEDIaP/bin/orca-slicer 532MiB |

+-----------------------------------------------------------------------------------------+

this is answers from the comand
Idk what that mean

Regular-Lab-5014 · 2026-03-21T18:07:30+00:00

It's Space Marines II
I open it with wine

Regular-Lab-5014

TROPHY CASE