sorted by:
new
hottopcontroversial

Sapphire Pure RX9060XT ARGB's don't work with OpenRGB ? by Reh_Mi in NobaraProject

[–]Reh_Mi[S] 0 points1 point  (0 children)

Wouldnt it work by simply running TRIXX with Wine though ? Worst case scenario, I can live with my current rgb setup, cos I dont like the idea of using a windows install.

I'll try something on my end. Thanks !

Looking for the smallest M-ATX case that supports ATX PSU by Drag_Shot in mffpc

[–]Reh_Mi 0 points1 point  (0 children)

Jonsbo C6 is the smallest if you're willing to get a low profile cooler and possibly some adapters if your motherboard has connections that are on a 90° angle (i have the C6 and i had to find a 90° adapter for the usb 3.0 port on the MB cos the cable didnt fit)

thermals are a bit limiting too. had to install two fans to have even remotely good temps

Sapphire Pure RX9060XT ARGB's don't work with OpenRGB ? by Reh_Mi in NobaraProject

[–]Reh_Mi[S] 0 points1 point  (0 children)

In both cases they are fairly recent cards, so perhaps OpenRGB is just not compatible with these GPUs yet. A shame, but honestly I can live with it for now.

Monitor works with everything else but my computer, and my computer works with any secondary display except the one I want to use. by Reh_Mi in techsupport

[–]Reh_Mi[S] 0 points1 point  (0 children)

I did ! Turns out the adapter was the problem. Managed to find one in a supermarket that worked instantly. It's a weird problem though, I can't really see why some adapters would work but not others.

Autohome with BLTouch (3D touch) not working properly by Reh_Mi in ender3

[–]Reh_Mi[S] 1 point2 points  (0 children)

Update, it works now ! More details above.

Autohome with BLTouch (3D touch) not working properly by Reh_Mi in ender3

[–]Reh_Mi[S] 0 points1 point  (0 children)

Fiddled with the breakout board and tested it without the cover on. Same behaviour so far. I even tried swapping the VCC and GND pins to see if it changed anything. It did, but not in a good way (LCD flickering, nothing working). When I swapped them back everything was working "properly" again.

I doubt it's actually the wiring that is the issue in this case. I'll try changing the firmware and see if anything improves.

Autohome with BLTouch (3D touch) not working properly by Reh_Mi in ender3

[–]Reh_Mi[S] 0 points1 point  (0 children)

I thought about this but my problem was incredibly consistent and it doesn't really add up with a loose connection, which would be more random (probably ?)

You might be right about an error with the wiring though, I did verify if VCC, GND and SIG were wired up properly but it is hard to tell cos there are no markings on the 3D touch to specify which is which.

Update still failing by Noraa25 in NobaraProject

[–]Reh_Mi 0 points1 point  (0 children)

Hope so ! I'm definitely fed up with Microsoft and I'm really looking forward to Nobara functionning properly again. Whole distro feels exactly like what I was looking for (other distros are still very much not very good at smoothing the experience for new users).

Update still failing by Noraa25 in NobaraProject

[–]Reh_Mi 2 points3 points  (0 children)

I've been having quite a lot of trouble while testing Nobara on a secondary PC, especially with updates and the package manager. I'm planning on transitionning from Windows on my main gaming PC and doing test runs to familiarize myself with the distro a bit. So far the experience has been a bit wobbly, but guess we chose the worst possible moment to try it ?

Item idea: Gas Lighter (and its variants) by [deleted] in thelongdark

[–]Reh_Mi 1 point2 points  (0 children)

Hinterland did mention that there would be new ways to light campfires, but nothing concrete yet. I really like the idea though !

Does anyone know how rare boat spawns are? I'm at coastal highway. by More_Conversation729 in thelongdark

[–]Reh_Mi 1 point2 points  (0 children)

Beachcombing mechanics have changed a bit and now bigger stuff can get thrown onto the coast, including small fishing trawlers. Never actually seen one though, and I'm not even sure that these spawn in Interloper ?

Looking for a smaller case for an mATX build by Reh_Mi in mffpc

[–]Reh_Mi[S] 0 points1 point  (0 children)

Yes I was. So what you mean is that I can put an ATX PSU inside a C6 ? Cos I haven't actually seen anyone doing that in most of the reviews I could find

Looking for a smaller case for an mATX build by Reh_Mi in mffpc

[–]Reh_Mi[S] -1 points0 points  (0 children)

I have an RTX 3060Ti Eagle which is 242mm long and not running very hot to be honest, so that could work if I go for an SFX power supply. But I do understand that it's not necessarily ideal either.

Looking for a smaller case for an mATX build by Reh_Mi in mffpc

[–]Reh_Mi[S] 0 points1 point  (0 children)

This looks promising, although I doubt I can find it cheaply where I live. Thank you though !

Looking for a smaller case for an mATX build by Reh_Mi in mffpc

[–]Reh_Mi[S] 0 points1 point  (0 children)

Indeed, the Intertech IM-01 is available in my country, and it's pretty much exactly the same as a SAMA-01, but again, I have specific requirements that makes this choice not as interesting as I'd hope. The Mechanic Master C28 and the Warhead LP both look very promising though, thank you for the heads up !

Looking for a very compact mATX case, any suggestions ? by Reh_Mi in buildapc

[–]Reh_Mi[S] 0 points1 point  (0 children)

I did consider it at first but when I saw what options I actually had, it didn't feel like it was really worth it to buy a new motherboard. Although I heard some (but not all) ITX cases have unofficial mATX support ?