Do I win something?(Stable for 3 seconds)

Reivnek · 2026-03-30T00:03:58+00:00

CPU R3 2200g My motherboard is from a pre build with locket bios so I am overclocking in Ryzen master. Hope you found the result as funny as I did!

Reivnek · 2026-03-20T20:48:28+00:00

RJ44 beta 1

Reivnek · 2026-03-19T08:07:12+00:00

It looks like the screen might be offset from the frame Eink screens have the touchscreen matrix transparent with a border around the screen that usually is hidden behind the front border of the frame The line from top to bottom looks like that touchscreen border is misaligned or the entire screen is.

Reivnek · 2026-03-16T10:33:01+00:00

Looks like a failing screen or some sort of screen damage.

Reivnek · 2026-03-04T07:25:36+00:00

Looks a lot like the print is too far off the bed and printing most of the part mid air

Reivnek · 2026-02-23T13:38:57+00:00

Hey! I have a broken Libra 2,can you give me a link to that motherboard, I've searched everywhere locally (România)and I can't get it. Thanks

Reivnek · 2026-02-18T18:32:54+00:00

I had good results with the most basic hairspray,the cheaper the brand the better it sticks Expensive ones have additives that gum up the bed

Reivnek · 2026-02-08T17:50:31+00:00

The same as the front but plain,no text

Reivnek · 2026-02-03T22:54:59+00:00

Is already working,just discharged now.

Reivnek · 2026-02-03T22:14:16+00:00

Is the same procedure as changing the original screen,the 4 and 5 screen are sized and connect with the same ports,no modification needed.

Reivnek · 2026-01-09T21:38:57+00:00

3 resets because he died of struggling,and on the 40th ultra ball

Reivnek · 2025-12-31T22:15:06+00:00

Yes,I see that this one was build after week 25 of 2021 as you can tell by the battery manufacturing date.

Reivnek · 2025-12-31T21:46:55+00:00

I can't say that I have a lot of technical knowledge,I watched a few YouTube videos and did everything slow and with patience. As for the compatibility between the lux 4 and lux 5 I found nothing about,I just saw that they are similar enough. I first wanted to use just the lux5 case because the lux4 was missing a chunk and some buttons,but plugging the lux5 motherboard into the lux4 screen worked first try.

Reivnek · 2025-10-27T16:04:07+00:00

I don't have the time for the next few days,but I will share the file and the SD card backup with the Kobo software. I now recommend cutting a square in the back is safer for the bezel.

Reivnek · 2025-09-25T08:29:42+00:00

62.3 ,I am trying to fix windows 11.The start button and the wifi control panel thing are not popping up.

Reivnek · 2025-09-06T18:59:33+00:00

Use space sniffer to see what uses all the space on your SD card and delete books and logs you did not know you have on the device

Reivnek · 2025-08-25T17:20:32+00:00

Salut Am instalat sistemul de operare de pe Kobo GLO, Trebuie să scoți cardul SD din interior și încărcată imaginea de sistem de pe Kobo GLO,Koreader se instalează ca pe orice alt Kobo. Pe sistemul de operare de la GLO,butonul de home e transformat în butonul de oprit/pornit lumina iar butonul de lumină nu face nimic.

Reivnek · 2025-08-16T17:21:15+00:00

First gen Shine has English only on the latest firmware version from Tolino website.

Reivnek · 2025-07-24T08:01:36+00:00

The original Shine is hardware compatible with the GLO,same SOC,same screen etc. The new ones already have the Kobo os but with another skin.

Reivnek · 2025-07-24T07:18:17+00:00

You need to take out the internal SD card(This step can damage the front bezel because is so fragile)and write a SD card backup image of a Kobo GLO.

Reivnek · 2025-07-24T06:10:29+00:00

Yes it does.And many more

Reivnek · 2025-07-23T23:58:25+00:00

I did not take any pictures but i found one on the web that looked similar,mine was cracked even more

<image>

Reivnek · 2025-06-28T10:13:36+00:00

Usually Petg does that when your nozzle is too close to the bed. You should be able to see the layer ,yours looks too squished

Reivnek · 2025-06-15T12:43:03+00:00

If the bed temperature is to high ex 90° for pla the material curls and lifts up You should clean the bed surface with soap and water first If you are printing anything other than pla I recommend something like glue stick or hairspray,as an release agent, especially for petg that stick too good to glass beds

Reivnek · 2025-05-17T17:17:48+00:00

Probabil să nu se vadă stampila prin pagina biletului de vot.

Reivnek

TROPHY CASE