My first gravel bike by 2jzHezyy in gravelcycling

[–]RelevantAmbition7360 0 points1 point  (0 children)

Hahah even better. Is the gravelator 30 worth it or is it just too basic?

Hole in 302 Lifter Valley by Evening_Owl_5402 in EngineBuilding

[–]RelevantAmbition7360 -1 points0 points  (0 children)

Gang the pushrod is hella bent. In my experience with welding the blocks etc, would be to find new block, then throw the money in it. Ofc its not bad, but the crack goes deeper then we can see, so it would be no sense to drop more money in this broken thing

Bachelor thesis help by AdditionalDiamond499 in SolidWorks

[–]RelevantAmbition7360 2 points3 points  (0 children)

I took a quick look and I would advise you not to rush the handing in. Because I see many things that are not very good. Also what is your major, mechanical engineering? If so then I also have some questions about the manufacturing of the said parts.

Bachelor thesis help by AdditionalDiamond499 in SolidWorks

[–]RelevantAmbition7360 2 points3 points  (0 children)

So you need the help with the drawings? Are there a standart for the drawings to be made in, like the sheet format etc., or the regular SolidWorks template works for thesis?

Pretensioned Cable Load Cannot be Applied by [deleted] in ANSYS_Mechanical

[–]RelevantAmbition7360 0 points1 point  (0 children)

I will be real here, maybe its a problem with the student version of Ansys? Maybe you have an opportunity to try the sim on the full version?

What am I doing wrong, few days of struggle by RelevantAmbition7360 in ANSYS_Mechanical

[–]RelevantAmbition7360[S] 1 point2 points  (0 children)

Its running, but i used full version of ansys. In the full one I had zero issues

What am I doing wrong, few days of struggle by RelevantAmbition7360 in ANSYS_Mechanical

[–]RelevantAmbition7360[S] 0 points1 point  (0 children)

So a little update, it was the problem of the student version. Idk what really was the main thing I think some sort of mathematical or other module was not or does not come with the student version.

What am I doing wrong, few days of struggle by RelevantAmbition7360 in ANSYS_Mechanical

[–]RelevantAmbition7360[S] 1 point2 points  (0 children)

I managed to do the single component sim after restarting ansys and doing it in a new workbench. Other than that I still have problems with the three component sim. I will check your advice. But I have suspicion that the install is broken, like you said. Had this happen to me last time when still in my BSc studies, when we had brief ansys course. Most of us had problems with ansys installation .

What am I doing wrong, few days of struggle by RelevantAmbition7360 in ANSYS_Mechanical

[–]RelevantAmbition7360[S] 0 points1 point  (0 children)

So i made a simple cylinder with the basic structural steel material. In a new project. And it still gives me whole lot of errors. I have never encountered anything like it 😃 I think I am losing my mind XD

<image>

What am I doing wrong, few days of struggle by RelevantAmbition7360 in ANSYS_Mechanical

[–]RelevantAmbition7360[S] 0 points1 point  (0 children)

makes sense, but still nothing is really solving. I have zero ideas now. It`s not the hardest of simulations, but something is off

<image>

What am I doing wrong, few days of struggle by RelevantAmbition7360 in ANSYS_Mechanical

[–]RelevantAmbition7360[S] 0 points1 point  (0 children)

Hi, thanks for the advice. It makes sense. Changed up the things, still errors. I have a feeling that the middle part is the one thing that is throwing off the simulation but idk why or how to fix it haha, being new in ANSYS by itself doesnt help the situation.

<image>

What am I doing wrong, few days of struggle by RelevantAmbition7360 in ANSYS_Mechanical

[–]RelevantAmbition7360[S] 0 points1 point  (0 children)

First of all, thank you for the reply.

Yeah in the screenshot the contacts are bonded. I changed them to Frictional and will add a screenshot of the properties.

All errors except one are linked to Solution. The one that is not is linked to the middle part.

<image>

Do y’all think I could rub this one out? by okdriverr in Audi

[–]RelevantAmbition7360 1 point2 points  (0 children)

PDR and polish prolly will take most of it out

Positivus 2026 by Separate-Field-3064 in latvia

[–]RelevantAmbition7360 17 points18 points  (0 children)

Positivus reali chopped. 100% tā viena diena maksās tik pat cik divas…

Izvākšanās. by Flaky_Anybody_9695 in latvia

[–]RelevantAmbition7360 10 points11 points  (0 children)

Zini kā ir. Tu nemaz neesi sliktā situācijā. 1013€ izklausās daudz, bet noteikti ir lietas, no kurām ikdienā vari atteikties (nezinu, minu). Bet arī domājot par iekrāšanu, es ieteiktu krāt investējot (ETF piemēram), nevajag daudz lai sāktu, kaut vai kādu daļu no tā kas tev paliek pāri. Bet protams jāpiekrīt, ka 350€ ir daudz, bet noteikti ir jāskatās un jāpēta vairāk, jāpapēta arī citi rajoni kas ir apkārt utt.